MiNID Product Introduction Slide 1 Welcome to RAD’s WBT • Thank you for joining us at this Webinar. We will begin shortly. • The audio will be streamed live over the Internet. Please make sure your computer speakers or headphones are turned on. • This is an interactive session. You can submit your questions in the “Chat” widget to the right of this screen. We will try to answer all questions during the webinar. • This class is recorded. The recording will be available soon at: – http://raddist.rad.com/3-16905/Archive/ • The recording for the North American VARs will be soon available at: – http://partners.radusa.com/3-18355/WBT-Archive/ RAD Professional Training Center
Transcript
MiNID Product Introduction Slide 1
Welcome to RAD’s WBT
• Thank you for joining us at this Webinar. We will begin shortly.
• The audio will be streamed live over the Internet. Please make sure your computer speakers or headphones are turned on.
• This is an interactive session. You can submit your questions in the “Chat” widget to the right of this screen. We will try to answer all questions during the webinar.
• This class is recorded. The recording will be available soon at:– http://raddist.rad.com/3-16905/Archive/
• The recording for the North American VARs will be soon available at:– http://partners.radusa.com/3-18355/WBT-Archive/
Service Assured Access (SAA)Throughout the Service Lifecycle
A comprehensive set of tools making it easier to plan, deploy,
provision, and maintain Carrier Ethernet services
MiNID Product Introduction Slide 5
Traditional Ethernet Demarcation
PacketSwitchedNetwork
Aggregator/PE
WithoutMiNID
DemarcationDevice
DemarcationDevice
DemarcationDevice
BTS
Router
Switch
• Pain factors
– Add new “boxes” at customer premises
– Allocate rack space and power
– Labor intensive installation
– optical fiber wiring
– power cabling
– rack installation
– Long and costly process
– Site survey and engineering
– Pre-fabrication of wiring and cables
– Installation by expert technicians
MiNID Product Introduction Slide 6
Designed for simple installation
Patent pending design – plug-in SFP and plug into hosting device
• Designed as physical SFP “sleeve” providing:
– Plugged into SFP cage (FE/GE, ordering options)
– Hosts off-the-shelf SFPs – 10/40/80Km, copper, single fiber
– Transparent to SFP “Digital Diagnostics Monitoring” (DDM) parameters
• Plug and play installation
– Pre-configuration or DHCP based Zero touch provisioning
MiNID Product Introduction Slide 7
Designed for simple provisioning
• Retrieve host parameters, TFTP server IP, and filename from DHCP server
• Retrieve Zero Touch Configuration file from TFTP server
– TFTP server can be implemented in the DHCP Server, Integrated in NMS or implemented in a stand-alone server
CPE
DHCP
Server
NMS and
FTP Server
PSN
MiNID Product Introduction Slide 8
MiNID Functional Highlights
• Service Demarcation
– Flexible classification with wire-speed packet handling up to 1Gbps
– S-VLAN attachment, Priority marking and L2CP tunneling
– SyncE support
• Monitoring and Diagnostics
– Service validation with RFC 2544/Y.1564 responder
– Continuity check and SLA assurance with 802.1ag, Y.1731
– On-demand loopback with UDP, IP and MAC swap
– Dying Gasp message upon power failure
• Management capabilities
– Controlled via in-band management channel
– Operated through Web-Menu and CLI for user-friendly operation
– Integrated with RADView NMS
MiNID Product Introduction Slide 9
End-to-End SLA monitoring
Access Network
Metro/Core
IP / MPLS
First Mile AccessAggregation
10GbERing
Cell-Site
FE/GbE
ETX-5
CustomerPremises
MiNID
ETX-5
ETX-5
FE/GbE
FE/GbE
FE/GbE
• MiNID generates up to 8 PM sessions measuring
• Packet loss
• Delay and Delay Variation
• Availability
• Utilization
• OAM reports sent from MiNID to management system
• SLA reports may be generated by PM Portal
MiNID Product Introduction Slide 10
SLA monitoring from central site
Access Network
Metro/Core
IP / MPLS
First Mile AccessAggregation
10GbERing
Cell-Site
FE/GbE
ETX-5
CustomerPremises
MiNID
ETX-5
ETX-5
FE/GbE
FE/GbE
FE/GbE
• PM actuator located at central site
• Can be ETX, Router or dedicated 3rd party “probe”
• Multiple OAM sessions set from PM actuator to MiNIDsat end points
• Can be ETX, Router or dedicated 3rd party “probe”
• OAM reports sent from PM collector to RADview or other management system
PM collected and reported via central site
SLA measurement
MiNID Product Introduction Slide 11
Fault Isolation Tools
Access Network
Metro/Core
IP / MPLS
First Mile AccessAggregation
10GbERing
Cell-Site
FE/GbE
ETX-5
CustomerPremises
MiNID
ETX-5
ETX-5
FE/GbE
FE/GbE
FE/GbE
• 802.3ah loopbacks (LBM/LBR)
• Wire-speed L2 and L3 loopbacks,
• All loops can be out of service (intrusive) or in-service (non intrusive)
• MAC/IP swap enabled per loopback (user configurable)
Fault Management Tools
SLA measurement
MiNID Product Introduction Slide 12
New in Version 1.1
Feature BenefitNew ordering option: MiNID/FE MiNID with FE interfacesIncreased number of flows to 16 8 monitored EVCs plus management Support L2CP/L2PT with optional MAC change (L2PT)
Transparently traverse legacy L2 networks
Configurable direction of SyncEtransparency
Use SyncE when plugged in user or network ports (i.e. mobile Radio links)
Utilization measurement on per flow basis
Allows utilization reports as part of SLA reports
L3/4 loopbacks and UDP echo responder
Allows monitoring and diagnostics over L3 networks
Integration with PM portal version 3.6
Generates SLA reports from MiNID including utilization and auto-discovery
MiNID Product Introduction Slide 13
MiNID Product Roadmap
Version 1.5 (Feb 2014) 2.0 (June 2014)
• Based on HW 1.5 (new CPU)• OAM features
• TWAMP light responder for integration in L3 networks
• MEP association to double tagged frames
• Loss measurement of real traffic with LMM (planned feature)
• Management features• SMNPv2 for alarms and PM collection • Security: SSH for CLI• SFP CA for WIN 7.0
• Based on HW 2.0 (new FPGA and CPU)• Forwarding and Traffic Management features:
• 32 flows and 16 EVCs• Jumbo frame support - 12000Bytes• Operation without SFP for offline probe
applications• OAM features• Increased L2 OAM scalability with 16
OAM sessions• Management features
• TWAMP integration with SMS• SSL and SFTP• SNMPv3 support for management and
configuration by 3rd party NMS• Traps and alarms• PM reports
MiNID Product Introduction Slide 14
Agenda
• Introduction to SAA
• MiNID product highlights
• Applications
• Main features
• Ordering information
• Value proposition
MiNID Product Introduction Slide 15
Enhancing Non-Carrier Ethernet Devices
• Many Ethernet devices are not Carrier Ethernet capable (e.g. old Cisco Catalysts)
• MiNID Upgrades them to provide Ethernet OAM, PM and diagnostics
MiNID Product Introduction Slide 16
Enhancing Mobile Networks and Radio Links
• SLA monitoring for transport network and Radio links
• Transparent to SyncE with ESMC pass through support
RNC/aGW
RADviewService Mgt.
ETX-5
Packet
Switched
Network
PE PE
Small Cells
Macro Cell
Macro Cell
Aggregation/MSAN
Mobile Operator verifying Transport provider’s SLA
eNBMiNID
MiNID Product Introduction Slide 17
Carrier
Ethernet
DSL
DSLAM
SLA Assurance (Y.1731, 802.1ag)
Circuit Validation (RFC-2544 / Y.1564)
Enhancing Legacy DSLAM
• DSLAM includes tools to estimate SLA performance for the fixed local loop segment back to their VDSL modems.
• MiNID adds values to DSLAM:
– PM - Accurate SLA Assurance with Y.1731 service OAM (Loss, DM, Jitter)
– FM - Wire-speed IP/MAC swap loopbacks, 802.1ag CC, LBs
• Combination of SLA Verifier, MiNID and DSLAM provide Edge to END SLA assurance
Miniature NID inSFP Sleeve format
MiNID
SLA Verifier
IP/MPLS
PE
MiNID Product Introduction Slide 18
MiNID in PON applications
• MiNID allows wholesaler to monitor its’ network
WS Domain
RSP
NID
Customer Premises
Customer
CPE
Customer Premises
PE PERSP
NIDPE
RSP Service Span
Possible RSP SLA Monitoring
WholesaleRegional
SP
NBN
ONU
Customer
CPE
NBN
OLT PE
GPON
RSP
NID
Customer
CPEPE PERSP
NIDPE
RSP Service Span
Possible RSP SLA Monitoring
WholesaleRegional
SP
NBN
ONU
Customer
CPE
NBN
OLT PE
GPON
Service Span
SLA Monitoring
WSDomainCustomer Premises Customer Premises
MiNID
MiNID Product Introduction Slide 19
MiNID – SFP Based Ethernet Demarcation
PacketSwitchedNetwork
Aggregator/PE
WithoutMiNID
DemarcationDevice
DemarcationDevice
DemarcationDevice
BTS
Router
Switch
• The value of MiNID
– Full reuse of installed base
– No need for pre-fabrication
– OPEX & CAPEX saving
• Based on RAD experience:
– Extensive NTU experience
– ETX product line
– In-house Smart SFP technology
– TDM-PWE (MiTOP)
– ETHoTDM (MiRIC)
PacketSwitchedNetwork
Aggregator/PE
WithMiNID
MiNID
MiNID
MiNID
Router
Switch
BTS
MiNIDSFP-basedNID/NTU
Ethernet OAM and Service Turn-Up
MiNID Product Introduction Slide 20
Thank you for attending RAD’s WBT
• This class was recorded. The recording will be available soon at the following URL:
