NanoSquare Guidebook for Prospective Students 2011
Welcome to Tenure–Track Laboratories— Nanoscience and Nanotechnology Research Center —
Interdisciplinary, world–class research
1
Intensive lectures & close supervision
Collaborative research seminars
Well–equipped laboratories
with considerable free space
2
group in Nanoscience & Nanotechnology
by up and coming scientists
Cross-department supervision is possible at the tenure-track system at OPU!
Department ofMathematical Science
Attend NanoSquare orientations for
OPU and students from other universities
Department ofApplied Chemistry
Pass the graduate school
entrance exam
3
School of Engineering/Science
Master’s/Doctoral program
Interview
with
TT lecturers
Students from
other universitiesOPU students
Undergraduate supervision (4th-year)
Graduate supervision
Department ofPhysical Science
School of EngineeringMathematical Science
School of EngineeringApplied Chemistry
School of SciencePhysical Science
held from early spring
until summer
Q.1 How can I learn more about TT lecturers and their labs?
A.1 In addition to referring to this guidebook, please attend our orientations held in the early spring. Inquiries and lab visits are always welcome by TT lecturers.
Q.2 Is it possible for undergraduates to receive TT lecturers’ research supervision?
A.2 Special arrangements can be made for a student who clearly intends to continue TT lecturers’ supervision into graduate school. In this case, the student may be reasonably expected to demonstrate competence in some aspects required to enter the graduate school.
Q.3 Can I choose any TT lecturer as my research supervisor?
A.3 Supervisor selection requires the mutual agreement between the TT lecturer and the student, as well as the approval of Chairman of the corresponding departments and the NanoSquare Program Acting Committee.
Q.4 How many students do TT lecturers accept per year?
A.4 Only a limited number of students are acceptable so TT lecturers can maintain an appropriate level of supervision while conducting world-class research.
Q.5 To which department should I apply?
A.5 Please select the most suitable department for your research project, either in the School of Engineering or School of Science. You may choose by examination subjects.
Q.6 Who will attend my admission interview? Will the TT lecturer I chose be there?
A.6 The TT lecturer you chose will attend your admission interview, however, the chairman of the interview will be selected from among the professors who belong to the department you applied to.
Q.7 Once I’m assigned to the TT lab, who will give me career advice?
A.7 After your assignment to one of the TT labs, a professor who belongs to the department you chose will be selected as your chair supervisor. The chair supervisor will be responsible for your career advice.
Q.8 I’m currently taking the JABEE* program in my department. Can I apply to TT labs in my fourth-year? *JABEE - the Japan Accreditation Board for Engineering Education
A.8 No, you cannot. According to the JABEE program guidelines, undergraduate students cannot receive TT lecturers’ supervision. For more information, please contact us.
4
◆Research Thesis Topics
5
Hayashi Laboratory
1 Numerical simulation of the scanning tunneling microscopy with molecular tip
2 Analysis of the electron scattering theory of quantum gases
Togawa Laboratory
1 Microscopic analysis of ion conductive material in anti-reactive environments
2Development of manipulation methods of magnetic domain dynamics using pure spin currents
Nishino Laboratory
1 Direct visualization of atomic defects in carbon nanotubes
2 Quantification of electron transport between single molecules
Kojima Laboratory
1 Preparation of functional collagen gel
2 Preparation of photoresponsive materials
Sakamoto Laboratory
1 Investigation of the formation mechanism of ordered mesoporous materials
2 Structural studies of meso-structured materials using electron microscopy
Takahashi Laboratory
1Spectral measurement of Raman scattering light from Silicon photonic crystal nanocavities
2 Theory of the Raman effect in photonic crystal High-Q nanocavities
IidaLaboratory
1Theory of spatial pattern control of metal nano-composite materialsby external fields
2Exploration of principles involved in the highly efficient light-induced charge separation in organic nanostructures
Kosuga Laboratory
1 Development of thermoelectric materials through nanoengineering
2 Improvement of the efficiency of oxide thermoelectric materials by nanosizing
Makiura Laboratory
1 Rational construction of nanofilms with molecular building units
2 Development of nanofilm functionalities by varying substituents
Tokonami Laboratory
1 Preparation of functionalized metallic nanoparticles
2 Fabrication of nanostructures using metallic nanoparticles
XuLaboratory
1Development of fabrication methods of Nano-in-Micro structures by fusion of top-down and bottom-up fabrication technologies
2Investigation of long-term functions of cells in a micro-hydrogel with nanostructures
YagiLaboratory
1 Synthesis of oxide nanomaterials in the liquid phase
2 Synthesis of metallic nanomaterials via electroless deposition
◆Graduate Education
6
Hayashi Laboratory
1Theoretical study on the vortex structures in non-centrosymmetric superconductors
2 Theoretical study of the flux-flow resistivity under a rotational magnetic field
Togawa Laboratory
1 Microscopic analysis of ferroelectric domain dynamics
2 Clarification of the nature of magnetic domain dynamics induced by spin currents
Nishino Laboratory
1 Development of a high-resolution spin-polarized STM
2 Development of nanobio-recognition devices
Kojima Laboratory
1 Development of DDS for metastatic cancer treatment
2 Preparation of organic-inorganic hybrid biomaterials
Sakamoto Laboratory
1 Structural studies of mesoporous materials using 3-D electron microscopy
2Synthesis and characterization of meso-structured materials using electron microscopy
Takahashi Laboratory
1 Calculation for Silicon Raman laser using photonic crystal nanocavities
2 Fabrication and characterization of Silicon Raman laser
IidaLaboratory
1Control of ordered formation in nano-assembly and design of their functions with light fields
2Exploration of principle in ultra-weak force metrology based on the fluctuation control by light
Kosuga Laboratory
1Improvement of thermoelectric performance of nanocrystalline thermoelectric materials and development of thermoelectric modules
2 Development of high-performance thermoelectric materials for application
Makiura Laboratory
1 Evaluation of physical properties induced by external stimuli on nanofilms
2Studies on the formation mechanism of nanofilms assembled by solution-based processes
Tokonami Laboratory
1 Application of highly ordered metallic nanoparticles to biosensors
2 Development of DNA multi-array sensor using metallic nanoparticles
XuLaboratory
1Measurement and elucidation of wetting of nanodroplets on well-defined nanostructures
2Development of protein nano-patterning methods for single molecule immunoassays
YagiLaboratory
1 Formation of solid electrolyte film via electroorganic synthesis
2Improvement of charge-discharge characteristics of rechargeable batteries usingnanomaterials
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Theoretical Study on
Phenomenology of
Superconductivity
Our goal is to explore and understand the variety of
quantum phenomena in condensed matter systems, especially
regarding “superconductivity.”
Join us in theoretical study and the exploration of
quantum phenomena in the natural world !
We investigate physical phenomena occurring in spatially
inhomogeneous situations of superconductivity.– Quantized flux (or vortex) under magnetic fields
– Surface state
– Junction system (called the Josephson junction)
In addition, another research theme is the development of numerical simulation
codes for analysis of experimental data obtained by scanning tunneling microscopy (STM)
with a molecular tip in collaboration with Dr. Nishino’s laboratory at N2RC.
Various phenomena in unconventional superconductors
Numerical simulation of scanning tunneling microscopy with molecular tip
. . . etc. Topics in theoretical condensed matter physics
Reference:
http://goo.gl/qY3S0
7
Dr. Nobuhiko Hayashi
Office: Bldg C10, Rm #422
Phone: +81 72 254 8203
Ext: 3553
n-hayashi<at>21c.osakafu-u.ac.jp
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st CenturyNanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Manipulation and Control of Electromagnetic Responses
in Nano-scaled Electrical Devices
Development of highly-efficient control and manipulation technology of electromagnetic responses in nano-scaled electrical devices, using in-situ TEM analysis of the physical properties of spintronic, ferroelectric, ion conductivity, superconductivity, multi-ferroic materials
Development and application of novel “in-situ” TEM analysis techniques available in extreme environmental conditions
Lorentz microscopy
(electron interferometry)
500 nm
Visualization of physical
properties related to
electric and magnetic field
MultiferroicsFerro-
electricityIon
conductivitySpintronics
(nano magnetism)
TEM holder for
electric signal application
Y. Togawa et al., APL 92, 012505 (2008).
USA Patent: US 7,808,814.
Patent 2007-186095, 2009-126523.
“Spin current switch”
Y. Togawa et al., PRL 95, 087002 (2005).
“Vortex ratchet”
Development of novel
device operation principle
Research Targets
Dr. Yoshihiko Togawa
Office: Bldg C10, Rm #314
Phone: +81 72 254 8216
Ext: 3557
y-togawa<at>21c.osakafu-u.ac.jp
We carry out “in-situ” TEM analysis of electromagnetic responses
in nano-scaled devices to obtain microscopic information on various
physical properties for application in novel functional devices.
Microscopic analysis of
domain wall structure
in nano magnetic device
8
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Defects in
carbon nanotubes
We will develop novel analytical methodology to reveal chemical nature and
states on solid surfaces at the atomic/molecular scale.
This leads to discovering novel surface phenomena and to realization of
advanced functional nanostructures.
Development of
nanoelectronic devices
Single Molecule Analysison a Solid Surface
Dr. Tomoaki Nishino
Office: Bldg C10, Rm #301
Phone: +81 72 254 8194
Ext: 3649
t-nishino<at>21c.osakafu-u.ac.jpSeeing what was unseen
Functional Materials Defects in carbon nanotubes
Diagnosis Development of biosensors
Spintronics Novel magnetic imaging
Catalysis Discrimination of single molecule chirality
It is vital to “see” tiny objects at the single atom/molecule levels in nanoscience and
nanotechnology.
However, it still remains difficult, or even impossible, to selectively observe area of
interest at these levels.
Single molecule detection
Development of novel
biosensing devices
High resolution magnetic imaging
Spintronics
Single molecule
chiral recognition
Enantioselective
Heterogeneous catalysis
9
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Creation of Functional Nano-Biomaterials-Nanoscience and Interdisciplinary Research
Leading to Next Generation Medicine-
Dendritic Polymer Nanoparticles for Drug Delivery and Imaging
Functional Collagen Materials using Nanoparticles
Functional Organic-Inorganic Materials
Design of Artificial Proteins
Dr. Chie Kojima
Office: Bldg C10, Rm #217
Phone: +81 72 254 8190
Ext: 3563
c-kojima<at>21c.osakafu-u.ac.jp
①Nanocapsules for Drugs and Imaging Agents
Various materials encapsulated in the dendrimer.
→Cancer Metastatic Dependent Drug Release
1) Collagen-mimic Dendrimer2) Dendrimer/Collagen Hybrid Gel
Our ultimate goal is to overcome diseases afflicting people worldwide.
①Biomaterials for Cancer TherapyCancer is the leading cause of death in Japan. Development of biomaterials for cancer therapy
and diagnosis is indispensable. We are studying nanocapsules and nanoparticles for drug delivery and imaging.
②Biomaterials for Tissue EngineeringTissue engineering of the nervous system, muscle and bone is useful for treatment of accidental
spinal cord injury and congenital intractable diseases. We have studied functional scaffolds for some stem cells and functional biomaterials to apply to regenerative medicine.
Our research techniques are based on chemistry and cell biology. Our projects are part of an interdisciplinary research, in collaboration with various researchers with backgrounds in medicine, pharmaceutics and physics.
Functional Nanoparticle: Dendrimer
Gold Nanoparticle
Photo-thermogenicity
↓Imaging,
Laser Treatment
Surface modification
Encapsulation
②Functional Collagen Materials
→Functional Cell Scaffold
Heating
→Temperature-dependent Drug Release
10
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Structural Studies of Self-Assembled
Meso-Structured Materials
Structural characterization of meso-structured materials.
Development of electron microscopy methods for meso-structured materials.
Understanding of self-assembled meso-structured materials.
Dr. Yasuhiro Sakamoto
Office: Bldg C10, Rm #318
Phone: +81 72 2548124
Ext: 5504
y-sakamoto <at>21c.osakafu-u.ac.jp
Our group focuses on structural characterization of
self-assembled meso-structured materials, including
porous materials (e.g. silica mesoporous materials,
zeolites) and colloid crystals using electron microscopy,
and the development of electron microscopy methods
for meso-structured materials.
Self-assembly of small building blocks such as atoms,
molecules, nano-particles and micelles into
mesoscopic structures is a common phenomenon in
nature, and has attracted the attention of many fields,
including physics, chemistry, biology and material
science. Recently, porous materials have become one
of the most frequently discussed self-assembled
meso-structured materials. Structural study of those
materials using electron microscopy provides crucial
information in the understanding of their properties
and formation mechanisms, and in the development
of science and technology.
(http://www.nanosq.21c.osakafu-
u.ac.jp/ttsl_lab/y_sakamoto/index.html)
11
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Waveguide
Nanocavity Raman
1.55 m
1.45 m
Silicon Photonic Devices using High-Q Photonic Crystal Nanocavities
Enhancement of nonlinear optical effects in high-Q nanocavities
Development of silicon Raman laser using high-Q nanocavities
Development of optical communication devices using nanocavities
Increasing the record of Q factor for the nanocavities
Dr. Yasushi Takahashi
Office: Bldg C10, Rm #213
Phone: +81 72 254 8129
Ext: 3537
y-takahashi<at>21c.osakafu-u.ac.jp
Capturing photon in a
micro region
Wavelength selective filters
Optical networks, optical circuits
High Q Photonic Crystal Nanocavities
7
6
5
4
3
2
1
020151050
3 ns Q : 3.6 million
Record of Q factor ~ 4 million
Optical memory, Quantum information
Advanced control of photon bychanging the periodicity of the air holes
Enhancement of optical Raman effect
Ultra-small Si Raman laser
Novel emission devices
HP
http://www.nanosq.21c.osakafu-u.ac.jp/ttsl_lab/y_takahashi/index.html
We study the photonic crystal high-Qnanocavities which is expected to lead tothe development of novel optical devices.Research methods are calculation,fabrication, and measurement. Students areencouraged to spontaneously work on thestudy with freedom, enthusiasm, vigor, andenjoyment .
Waveguide
Nanocavity
240 nmAlign nano-scale air-holesin a triangular lattice
Fabricated by up-to-dateengineering
12
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Nanodynamics created by
Light & Fluctuation:“Fabrication,” “Observation,”& “Manipulation”
of the Morphology and Functions of Nano-
composite Materials by Light
Statistical mechanics and thermodynamics of nano-objects excited by light
Microscopic theory of excited nano-objects using the quantum chemistry
Simulation of dynamics and final states of nano-objects under external fields
Optical applications & analyses of nano-systems under fluctuations
We aim to create nano-systems with novel optical functions based on
the optical control of fluctuations!
◎High performance
cluster-computing
system
◎Theoretical methods:
Quantum mechanics,
Electrodynamics,
Nonequilibrium statistical
physics
Methods & Equipment
◆We will offer a course to enhance your
skills in theoretical research with the
Numerical Computation Training Course
and Journal Club to read specialized books.
◆Since we are involved in the active
collaboration and communication with
experimental groups, an experimental
demonstration based on your theoretical
results can be realized.
Let's pioneer new fields under our keywords 'Light' &
'Fluctuation' from fundamental to applied research!
A major part of our research is developing the principles involved in
◎ Fabrication of novel nano-composite materials based on bottom-up control
◎ High sensitive measurement & analysis methods based on fluctuation control
utilizing light irradiation induced force and phenomena. Based on the obtained principles, we
aim to construct new fields in "Light-induced Force Nano Engineering.“ One goal is to
construct the foundation of next generation nanotechnology in order to solve environmental and
energy issues, and develop applications for life science based on the above principles. From
analogies with biological systems, we are working to establish the foundation of a fabrication
method for a highly-functional photo-energy conversion system and for nano-scale devices
driven by light and fluctuations.
We have a strong background in Solid State Photo Physics, but are working towards
interdisciplinary research with the collaboration of researchers in various fields, such as
"Photo-Physical Chemistry," “Analytical Chemistry,” and "Biological Science."
Please see our website: http://www.nanosq.21c.osakafu-u.ac.jp/ttsl/en/en_t_iida.html
13
Dr. Takuya Iida
Office: Bldg C10, Rm #402
Phone: +81 72 254 8132
Ext: 3564
t-iida<at>21c.osakafu-u.ac.jp
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st CenturyNanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Development of Novel Thermoelectric Materials with High Performance
Thermoelectric Conversion Technology is now Expected to Contribute to Solving Global Warming and Climate Change Issues by Recovering and
Converting Waste Heat into Electricity, Thus Improving the Total Energy Utilization and Suppressing the Consumption of Fossil Fuels.
Development of High-Efficient Thermoelectric Materials
by Nanostructure control
Development of Eco-Friendly Ceramic Thermoelectric Materials
Development of Thermoelectric Materials Intended for Space Applications
Thermoelectric Modules
Aiming at Various Applications
We are planning to develop novel thermoelectric materials and modules through experimental and computational approachesWhy don’t you join us ?
14
Dr. Atsuko Kosuga
Office: Bldg C10, Rm #718
Phone: +81 72 254 9826
Ext: 3620
a-kosuga <at>21c.osakafu-u.ac.jp
Thermoelectric Materials
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Development of Functional
Surface/Interface Nanostructures based
on Molecular Systems
Nanofilm fabrication with molecular building units
Structural analysis by X-ray diffraction techniques
Development of nanofilm properties
Interface study of heterostructures
Dr. Rie Makiura
Office: Bldg C10, Rm #311
Phone: +81 72 254 9851
Ext: 3554
r-makiura<at>21c.osakafu-u.ac.jp
Rational design and construction offunctional nano-layered systems,whose structural and chemical/physical properties can be easilyswitched, represents a key objectivein modern material science at thenanoscale level and a key challengefor future nanodevices.
Metal-organic frameworks (MOFs), which consist of molecular organic building blocks, are considered to be potential materials for such surface nanoarchitectures.
Using a variety of deposition techniques on selectedsubstrates, layer-by-layer “bottom-up” growth of MOFsallows unprecedented control of structural organization atthe molecular level, and fine tuning of system properties atthe same time.
Concept
Research Plan
The importance of the research is to explore thepotential of MOF nanofilms with designedstructures and embedded multiple functionalitiesas critical components of future integratednanodevices.
Future View
Organic molecular
building block
Metal linker
・Phase transition・Ionic conduction
・Magnetic order
Gas pressure
Electric field
Magnetic field
I. Construction of PCP nanofilm II. Physical/Chemical properties
III. Size & interface controlled nanoparticles
VI. PCP surface nanostrucutre integrated
with nanoparticles
Separation
Reaction
Transport
15
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Optical and Electrical Biosensing
Using Gold Nanoparticles
Development of an electrical DNA sensor by using gold nanoparticle (AuNP) arrayed film
Fabrication of AuNP arrayed film to study nerve cell function
Development of an optical virus-detecting sensor using arrayed AuNPs
Dr. Shiho Tokonami
Office: Bldg C10, Rm #414
Phone: +81 72 254 9824
Ext: 3567
s-tokonami<at>21c.osakafu-u.ac.jp
Stained glass
AuNP
Properties of AuNP
Virus-detecting sensor by using SERS of arrayed AuNPs
DNA sensor using AuNP arrayed film
Addition of target DNA
Formation of DNA double-
strand between adjacent
nanoparticles
Electrical path
Purplish red color due
to the localized surface
plasmon resonance
Nanoparticulation
Gold
Monitoring a resistancechange of DNA caused bya transition from single todouble-strand
Closely arranged AuNPsSurface-enhanced Raman scattering (SERS)
Target species:
▪ Staphylococcus aureus
▪ Bacillus coli
▪ HIV etc…
AuNPs are connected through the antigen-antibody reaction, which induces SERS.
16
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Medicine
Development of Nano/Micro
Interfaces and Integrated Devices
at the Molecular and Cellular levels
Creation of nano/micro interfaces by integrating biomaterial engineering &.
nano-/microfabrication technology
Creation of cellular and molecular devices for medicine, based on the
construction of well-defined nano/micro interfaces
Development and application of chemical & biological nano/microfluid devices
Development of Extreme Nanofabrication(Fusion of Top-Down and Bottom-Up Methods)
Design and Synthesis of Functional
Biomaterials
Nano-in-Micro Biointerfaces
(NiMBi)
Cellular and Molecular Devices
Nano-/Microfluidic Devices
Nanofabrication Technology
Bridging the nanoscale and microscale of cells
is the key to understanding life phenomena at
the cellular and molecular levels.
IntegrationBiomacromolecules
Cellular Assay
Cells
Microspace
Well-defined
extracellular
Matrix
(ECM) at
the nano-
scale level
Molecular Analysis
Device
Lab-on-a-Chip
Nanochannels
Nanopillars
Nano-in-Micro/Nano-in-Nano Structures10 m
1 m
500 nm
Multi-functions
for nano-devices
Multi-functional moieties
Chip fabrication
Surface modification
Fluidic control
Chemical and biological processes
Separation, analysis, and detection
Application in fields of medicine,
pharmacy, environment, and energyBiomaterials Engineering
17
Dr. Yan Xu
Office::Bldg C10, Rm # 306
Phone: +81 72 254 7813
Ext: 3579
Nanoscience and Nanotechnology Research Center (N2RC), Research Organization for the 21st Century
Synthesis of nanomaterials
for rechargeable battery
systems
Without a magnetic field With a magnetic field
We are researching practical
thermodynamics and electrochemistry, which
are useful in the synthesis of various
materials. Learning through a series of
laboratory seminar is provided.
For example, as shown on the left,
synthesis processes of metal and oxide
nanomaterials are designed based on a
potential-pH diagram.
Liquid-phase synthesis of metal and oxide nanomaterials
Formation of solid electrolyte film via electro-organic synthesis
Improvement in the charge-discharge properties of rechargeable
batteries using nanomaterials as electrode materials
The electron microscopy images on the left
show ferromagnetic metal nanowires, which
were synthesized in a process that combines
ferromagnetic nanoparticles and an external
magnetic field. Metal nanowires can be
modified into oxide nanowires. Selective
oxidation of the nanowire surface can provide
an electrode active material with electron-
conducting paths.
To develop rechargeable batteries with a electromotive force higher
than 4V, establishing a synthesis process of solid electrolyte film with a
high carrier ion and low electron conductivity is important. In this
laboratory, we are also studying the formation of a solid electrolyte film
via electro-organic synthesis.
18
By establishing a simple and low-cost synthesis process of metal and
oxide nanomaterials, we seek to develop next generation rechargeable
batteries with high charge-discharge properties.
We are seeking to synthesize electrode active materials and solid electrolyte materials,
and fabricate batteries to conduct charge-discharge tests. By learning and enjoying how
to create things, we are working to develop next generation rechargeable batteries.
Dr. Shunsuke Yagi
Office: Bldg C10, Rm #418
Phone: +81 72 254 7791
Ext: 3551
s-yagi<at>21c.osakafu-u.ac.jp
Profiles of tenure-track special lecturers
Dr. Nobuyuki Hayashi
Biography : Master of Science and PhD in Science at Okayama University. Research Associate at Okayama University. Worked at ETH Zurich, the Japan Atomic Energy Agency, and took up the position in January 2009. Research : Theoretical condensed matter physics, especially superconductivity. Investigating novel phenomena in unconventional superconductors, and non-centrosymmetric systems. Goal : Before scientific discovery and technological invention, there always come the achievements of those conducting basic research. As I am involved in basic science, I would like to pass along the benefits of the experience I have gained to the young.
Dr. YoshihikoTogawa
Biography : Master of Engineering and PhD in Engineering at the University of Tokyo. Worked as a researcher at the Single Quantum Dynamic Research Group, Frontier Research System, RIKEN, and took up the position in January 2009. Research : Development of a new principle of device operation for next-generation electronic devices. Focused on electric conducting phenomena such as spintronic, superconducting, ferroelectric and ion-conductive properties, and advanced research based on in-situ analysis of electromagnetic responses in devices, using an electronic microscope. Goal : The Eureka moment is the greatest time for scientists. I hope to achieve such moments by enjoying my research and exploring novel research fields over the years ahead.
Dr. TomoakiNishino
Biography : BS in Chemistry at the University of Tokyo. Became an assistant professor, and then obtained a PhD in Science at the University of Tokyo. Worked as a JST researcher for PRESTO from 2007 to 2011. Took up the position in January 2009. Research : Developed new chemical analysis methods of single molecules by using scanning tunneling microscopy. Especially focused on developing quantitative evaluation of spatial resolved atomic defects in carbon nanotubes, and creating nano biodevice applications. Goal : I would like to establish a process for rapid DNA diagnosis using very small sample amounts.
Dr. ChieKojima
Biography : Obtained Master’s degree in Engineering from Osaka Prefecture University. PhD in Biostudies at Kyoto University. Worked as an assistant professor at the Department of Applied Chemistry, Graduate School of Engineering, Osaka Prefecture University. Took up the position in January 2009. Research : Preparation and biomedical applications of functional polymers and organic-inorganic hybrid materials. Goal : The development of novel nano-biomaterials by utilizing my experience in polymer chemistry and molecular biology and collaborating with other researchers in different fields. I would like to contribute to developing a functional nanocapsule which works selectively on cancer cells.
Dr. YasuhiroSakamoto
Biography : PhD in Physics at Tohoku University. JSPS research fellow at Tohoku University. After gaining experience at the Semiconductor Energy Laboratory Co. Ltd and at Stockholm University as a junior research fellow, took up the position in April 2009. Research : Structural studies of meso-structured materials and development of electron microscopy methods. Focuses especially on porous materials and studies the mechanism of their formation. Goal : By using electron microscopy methods, I would like to study the 3D structure of meso-structured materials, and discover the mechanism of nature in the nano-world.
Dr. YasushiTakahashi
Biography : BS in Physics at Keio University. PhD in Advanced Materials Science at the University of Tokyo. Worked as a postdoctoral researcher in Electronic Engineering, Kyoto University, and then took up the position in April 2009. Serving concurrently as a JST researcher for PRESTO. (From 2009 to 2013) Research : Development of Silicon Raman laser using Photonic Crystal Nanocavities. Development of novel optical communication devices using ultra high-Q nanocavities is catching the world’s attention. Goal : My research goal is to become a pioneer in the development of devices for future photonic chips, and also I would like to manage a laboratory, training students, which has the best educational environment in the world.
19
Dr. TakuyaIida
Biography : Master of Engineering and PhD in Science at Osaka University. After serving as a JSPS research fellow, research fellow of CREST, and an assistant professor in the graduate school of Engineering at Osaka Prefecture University, took up the position in April 2009. Served as a JST researcher for PRESTO from 2007 to 2011. Research : Theory of fluctuation control by light and creation of novel functional nanocomposite materials. Exploring the guiding principles for “Creation,” “Observation,” and “Manipulation” of nano-composite materials by utilizing light and its fluctuations. Goal : By developing principles for the fabrication and the control of a system of highly functional light energy conversion, I would like to contribute to the construction of infrastructure in future nano-technology which will solve environmental and energy problems.
Dr. AtsukoKosuga
Biography : Master of Engineering at Osaka University. PhD in Engineering at Osaka University in 2006. Worked at Murata Manufacturing Co., Ltd, COE Assistant professor at Osaka University, JSPS research fellow at National Institute of Advanced Industrial Science and Technology and took up the position in April 2010. Research : Development of novel high-efficiency thermoelectric materials. Research focuses especially on developing environment-conscious thermoelectric materials and modules through nanostructure control. Goal : I believe anyone has a chance to make a brilliant discovery if the person continues to do research carefully without quitting. I would like to share such a moment with my students and colleagues.
Dr. RieMakiura
Biography : MSc in Chemistry from the University of Tsukuba and DSc from Kyushu University. Research career at SEIKO EPSON Cooperation and at the Department of Chemistry, Kyushu University as an assistant professor, and took up the position in April 2010. Research : Research focus is on the rational design and construction of functional surface/ interface nano-structures, based on molecular systems whose structural and chemical/ physical properties can be easily switched. These nanolayered systems represent a key objective of modern materials science at the nanoscale level and a key challenge for future nanodevices. Goal : One of my goals is to contribute to the nanoscience field as well as the nanotechnology industry by creating highly efficient nanodevices with low energy processes. My concept for conducting research in the laboratory is to respect the spirit of inquiry and to enjoy the research by sharing the inspiration of discovery with my students.
Dr. ShihoTokonami
Biography : Master of Science at Yamaguchi University, PhD in Material Science and Engineering at Osaka Prefecture University. JSPS research fellow, Postdoctoral fellow at Hiroshima University, and Tokyo University of Science Yamaguchi and took up the position in April 2010. Research : Developing chemical sensors using optical and electric characteristics of gold nanoparticles. In particular, creating nanostructures by using nanoparticles and applying these to biosensors. Goal : To develop a sensor for DNA or viruses which would benefit health and hygiene.
Dr. YanXu
Biography : Bachelor from Dalian University of Technology in 2001, Master’s from Dalian Institute of Chemical Physics, Chinese Academy of Sciences in 2004, and PhD from the University of Tokyo in 2007. Served as a JSPS fellow from October 2007 to September 2009 and then as a Research Scientist from October 2009 to March 2011 at the University of Tokyo and took up the position in April 2011. Research : Creation, exploration and application of nano/micro interfaces at molecular and cellular levels, by integration of nano/microfabrication technology and biomaterials engineering. Goal : Based on these novel nano/micro interfaces, I aim to develop miniature integrated devices for applications in the fields of medicine, pharmacy, environment and energy. I also aim to have students actually experience happiness in their research as they work in my lab.
Dr. ShunsukeYagi
Biography : Master of Engineering and PhD in Materials Science and Engineering at Kyoto University. After serving as an assistant professor at Kyoto University for four years, took up the position in April 2011. Research : Synthesis of metallic nanomaterials, oxide nanomaterials, and solid electrolyte materials via chemical or electrochemical methods. Application of nanomaterials for rechargeable battery systems. Goal : Establishing inexpensive methods with high-volume production capability for the synthesis of nanomaterials, I would like to contribute to the development of next-generation rechargeable battery technology using nanomaterials.
20
ContactNanoscience and Nanotechnology Research Center
Phone:+81 72 254 8174 (direct) Ext:3646 NanoSquare <at>21c.osakafu-u.ac.jp
21
Introduction to Nano Measurement based on analytical chemistry, surface/interface science, and electrochemistry
NanoPhysics
NanoMeasurementNanomaterials
Introduction to Nano Physics based on optical physics, solid-state physics, and material science
Introduction to Nanomaterials based on material science, crystallography, complex chemistry, and biochemistry
Students will learn about green-innovation and life-innovation based on optical physics, solid-state physics,
crystallography, analytical chemistry, surface/interface science, supramolecular chemistry, and biochemistry.
22
Lecturer Theme
1Prof. T. IshidaProf. M. Adachi
Introduction to Nanoscience and Nanotechnology,Tenure-track System at OPU
2 Dr. Y. Takahashi"Optical Semiconductor Devices in Daily Life"LED, the world’s leading semiconductor laser developed in Japan fully utilizesnano-technologies
3 Dr. T. Iida
“Fabrication, Observation, and Manipulation of Novel Functional Nanomaterials by Light and Fluctuations"Fabrication of high efficiency light energy conversion materials from nanoparticles dancing in light bowl
4 Dr. N. Hayashi"What Is Superconductivity?"Properties of a macroscopic quantum effect in the natural world
5 Dr. Y. Togawa"Evolution of Information Society by Magnetism"Cutting edge of energy-saving magnetic memory as a key electrical device in an information society
6 Dr. A. Kosuga "Thermoelectric Generation Technology"Environmentally-friendly technology which converts thermal energy to electricity
7 Dr. S. Yagi "Future Battery Technology Using Nanomaterials"High-performance batteries which change one’s lifestyle
8 Dr. R. Makiura"A Novel Nano World Created with Molecular Building Blocks"Introductory lecture about porous materials: a subject of the work nominated for the 2010 Nobel Prize in Chemistry
9 Dr. Y. Sakamoto "Looking into the Nano World! "Microscopic world unveiled by electrons and science of nano-scaled space
10 Dr. C. Kojima"Synthetic Polymers vs. Biopolymers“A chemical viewpoint in organisms which can provide various functional materials
11 Dr. Yan Xu "World on a Chip! "Introduction to micro/nano chemical and biological chips
12 Dr. S. Tokonami "Potential of Metallic Nanoparticles"Nanoparticles can enrich your life
13 Dr. T. Nishino"Science of Single Molecules: Visualizing an Invisible World”Direct observation and manipulation of a single atom/molecule
14Dr. H. HorinakaDr. M. Matsuoka
Initiative of NanoSquare Program
15Dr. Y. KubotaTT lecturers
Invitation to NanoSquare Research Center
Schedule
Lecturers: Prof. T. Ishida, Prof. H. Horinaka, Prof. M. Adachi, Prof. M. Matsuoka, Prof. Y. Kubota
G u e s tSpeakers:
TT lecturers: Dr. Hayashi, Dr. Togawa, Dr. Nishino, Dr. Kojima, Dr. SakamotoDr. Takahashi, Dr. Iida, Dr. Kosuga, Dr. Makiura, Dr. Tokonami, Dr. Xu, Dr. Yagi
PH
For 3rd-year Every Tuesday, 5th class Omnibus lecture Undergraduates in the 2nd semester 15 weeks
PH
PH
PH
MT
MT
MT
MT
MT
MS
MS
MS
…Nano Physics …Nanomaterials …Nano MeasurementMSMTPH
04
MEXT- Special Coordination Funds for Promoting Science and Technology Program
“Leading University as a Base for Human Resource Development
in Nanoscience and Nanotechnology”
http://www.nanosq.21c.osakafu-u.ac.jp/en/
e-mail: NanoSquare <at>21c.osakafu-u.ac.jp