WG Reconfigurable Arbor Table Brochure

ARBOR RECONFIGURABLE TABLESS p e c i f i c a t i o n G u i d e

Fourth Edition

SEMINAR CONFERENCE BOARDROOM TRAINING

W A L L G O L D F I N G E R

Arbor Reconfigurable TablesSpecification Guide

Fourth Edition2011

Wall Goldfinger, Inc.Northfield, Vermont 05663

ii | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ContentsOverview iii

TABLES AND CONFIGURATIONS 1Rectangular Tables 4Square Tables 7Racetrack Tables 10Special Tables 12

MATERIALS 15Veneer 16Patterns 22Variations 28Dura-Bull Synthetic Leather 30Stone 34

TABLE EDGES 39Inlay / Cross Banding 42Edge Types 44Edge Profiles 46Edge Details 48Standard Metal Finishes 50Premium Metal Finishes 50

LEGS AND BASES 53Table Ganging 56“Toggle” Connectors 56Leg Placement 56Anderloc 57“Tuning Fork” Connector 57Table Legs 58Leg Finishes 62Folding Leg Mechanism 63Folding Legs / Bases 63Double Column Ganging Bar 63Bullnosed Base 64T-Base 64Custom Arch Base 65Offset T-Style Base 65Loop Leg 66Pedestal Base with Tilt Top 67

Pedestal Bases 67Stone Tilt-Top Table 69Split Folding Top Tables 70Folding Base Tables 71Leveling System 72Leveler Discs 73Leveler 73Locking Caster 73Levelers 73Leveling Caster 73

TABLE ACCESSORIES 75Grommets 78Round Pass Through / Flange 78Solid Brass 78Plated Steel / Flush 78Wood Grommets 78Pass Through Access 79Table Top Hatches 79Single Door Access 80Double Door Access 82Communication 84Speaker Phone 84Microphones 85Power / Data Units 87Wire Management 88Modesty Panels 91Transport / Storage 92Table Top Storage Cart 92Vertical Table Top Storage Cart 92Portable Leg Cart 92Envelope Wrap 93Fitted Envelope 93

APPENDIX 95Table Weights 96Publications 98

OVERVIEW

Configurations 1BoardroomTrainingConferenceSeminar

Materials 15VeneerStoneSynthetic Leather

Table Edge 44

TypesProfilesDetails

Levelers 72

DiscsCastersLocking

Lightweight Core 69

Inlays / Cross Banding 42

Communication 82

Speaker PhonesMicrophones

Wire Management 86

ExternalHinged DoorRacewayColumn Guard

Table Legs 58

SquareRoundTaperedMetalSteelChromeT-Base

Table Storage 91

Leg CartTable CartEnvelope Wrap

Table Top Hatches 82

Single DoorDouble DoorStainless SteelMetal Box Frame

Table Ganging 56

Anderloc Leg Placement“Tuning Fork” Connector

“Toggle” Connector 56

Power/Data 85

Veneer Patterns 24

BookmatchSlip MatchReverse MatchDiamondBoxHerringboneSunburstSpecial

ARBOR SPECIFICATION GUIDE | INTRODUCTION | iv

TABLES AND CONFIGURATIONS

RECTANGLE SQUARE RACETRACK SPECIAL FORMS

2 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

CONFIGURATIONS

Individual Arbor tables are the building blocks that can be combined and re-

combined to create layouts that best support a particular meeting’s purpose.

Arbor tables are typically simple geometric forms: rectangles, squares, half

circles, and quarter circles. Used in 1-to-1 and 2-to-1 ratios, each table top

can be combined into a variety of configurations to meet specific space and

functional requirements. Arbor’s inherent lightweight and quick configu-

rability also allow for arrangements to be easily changed when desired and

stored when not in use.

ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 3

BOARDROOM

Traditional rectangular boardroom layouts can be

achieved with Arbors ganged side to side or end to end/

side to side.

OPEN BOARDROOM

A “U” shaped Arbor assembly is perfect for meetings

in which the speaker or presenter wishes to interact

closely with the audience. Here we’ve added small

square Arbor extensions to create a “C” shape.

CLOSED BOARDROOM

The hollow square is an effective way to create excellent

communications around a table.

SEMINARS AND TRAINING

End to end Arbor connections are typically used in

seminar and training situations. Arbor’s inherent light-

weight and quick reconfigurability are ideally suited to

these situation as changing classroom requirements can

be easily accommodated.


RECTANGULAR TABLES

Rectangular Arbors, especially those using a 2-to-1 length to width ratio, can be assembled in several different ways:

side to side, end to end, and side to end. These combinations can produce varying layouts, from large rectangles to

hollow squares to long ranks.

DIMENSIONS 30” x 60” 33” x 66” 36” x 72”


RECTANGULAR TABLES

A

C

E

B

D

F


RECTANGULAR TABLES


SQUARE TABLES

In some cases, square topped Arbors may be the best solution. Square tops are often used in dining areas or in multi-

function areas where dining and conferencing are combined. Depending on the size of the top and the aesthetic

requirements, it may be possible to use a cube style pedestal base rather than our toggle leg system.

DIMENSIONS 48” x 48” 60” x 60”


SQUARE TABLES

A

C

E

B

D

F


SQUARE TABLES


RACETRACK TABLES

CIRCLE

Arbors can be built as circles, half-circles and quarter circles.

They can also be assembled to create circles or toroids. These

use the same toggle legs and thus alleviate leg clearance issues

by using shared legs at table joints.


RACETRACK TABLES

OPEN CENTER

Arbors can be used to great effect in a quarter circle format. These

quadrants, either with a full radius edge or with a center scallop,

can be used to create a variety of racetrack plans when used in

conjunction with Arbor rectangles or squares.


SPECIAL TABLES

VIDEO CONFERENCING

“Keystone” Arbors allow the creation of the “V” shapes so pop-

ular for video conferencing applications. Since the keystone is a

custom shape, it can incorporate whatever angles are required

to optimize sight lines or best utilize a particular space.


SPECIAL TABLES

FREE FORM

Configurations can be created using a combination of Arbor

shapes and sizes. These free form arrangements provide

the ultimate in design flexibility and are a great solution for

spaces that require a truly custom solution.


MATERIALS

VENEER PATTERNS DURA-BULL LEATHER STONE


VENEER

Made from slices of an individual tree, veneers are a popular choice to create

uniquely beautiful designs that add warmth to any room. The unique char-

acteristic of a veneer is a reflection of the type of tree, the way the tree was

sliced and how the grain of the veneer slices are matched to create the final

product. At Wall Goldfinger, we are known for our expertise in the selection

and hand crafting of veneers. We offer more than 60 choices of veneer and

because of our extensive experience and relationships, can source custom

veneers upon request.

ARBOR SPECIFICATION GUIDE | MATERIALS | 17


VENEERLI

GH

T LIGH

TM

EDIU

M

PLAIN SLICED ASH QUARTERED FIDDLEBACK ENGLISH SYCAMORE

QUARTERED ASH QUARTERED FIGURED MAPLE

QUARTERED FIGURED FRENCH ASH PLAIN SLICED FIGURED MAPLE

PLAIN SLICED FIGURED FRENCH ASH BIRDS EYE MAPLE

PLAIN SLICED MAPLE BAMBOO SMALL KNUCKLE

QUARTERED MAPLE PLAIN SLICED ANIGRE

PLAIN SLICED FIGURED ENGLISH SYCAMORE QUARTERED PLAIN ANIGRE

QUARTERED FIGURED ENGLISH SYCAMORE QUARTERED BLOCK MOTTLED ANIGRE

Illustrations are broadly representative of specific veneer types.


VENEER

MED

IUM

MED

IUM

MED

IUM

DA

RK

QUARTERED FIGURED ANIGRE PLAIN SLICED PEARWOOD

QUARTERED FIDDLEBACK ANIGRE QUARTERED PEARWOOD

RIFT RED OAK QUARTERED FIGURED PEARWOOD

RIFT WHITE OAK QUARTERED OKUME

QUARTERED CEYLON SATINWOOD BEE’S WING FIGURED PLAIN SLICED CHERRY

QUILTED MAPLE QUARTERED CHERRY

QUARTERED FLAKEY WHITE OAK PLAIN SLICED FRENCH WALNUT

QUARTERED BEE’S WING EUCALYPTUS QUARTERED ZEBRANO

Please review actual samples before making final selection.


VENEERM

EDIU

M D

ARK

MED

IUM

DA

RKD

ARK

PLAIN SLICED MAKOREQUARTERED FIGURED MOZAMBIQUE

PLAIN SLICED MAHOGANYQUARTERED BLOCK MOTTLED MAKORE

QUARTERED ETIMOEQUARTERED ROPEY CHERRY

QUARTERED MAHOGANYPLAIN SLICED ROPEY CHERRY

QUARTERED AFRICAN MAHOGANYQUARTERED SAPELE (RIBBON STRIPE)

QUARTERED FIDDLEBACK MAKORESAPELE POMMELE

QUARTERED BUBINGAMOABI POMMELE

KEVIZINGOQUARTERED PLAIN MAKORE

Illustrations are broadly representative of specific veneer types.


VENEER

DA

RK

DA

RK

BAMBOO LARGE KNUCKLEQUARTERED BEE’S WING EUCALYPTUS

QUARTERED FRENCH WALNUTPLAIN SLICED WALNUT

QUARTERED EAST INDIAN LAURELQUARTERED WALNUT

QUARTERED EAST INDIAN ROSEWOODQUARTERED FIGURED WALNUT

QUARTERED MACASSAR EBONYQUARTERED ENGLISH BROWN OAK

EBONIZEDQUARTERED WENGE



PATTERNS

Wood veneer selection can be made on a vast range of design ideas. As a

natural material and renewable resource wood veneer’s beauty comes from a

variety of ways the veneer leaves are laid together and matched. While each

species has unique characteristics, the way in which the wood is sliced will

produce very different grain characteristics. Then there is how the panels

are to be stained or dyed and ultimately finished. All these variations allow a

myriad of design possibilities. As with our veneers, we offer a wide variety of

patterns and can create custom patterns upon request.



PATTERNS

SLIP MATCH

BOOK MATCH

DIAMOND

REVERSE SLIP MATCH

BOOK & BUTT MATCH

REVERSE DIAMOND


PATTERNS

BOX

BLOCK

HERRINGBONE

REVERSE BOX

BASKETWEAVE

‘V’ MATCH


PATTERNS

CIRCLE — BOOKMATCH

CIRCLE — WEAVE

CIRCLE — BOOK & BUTT

CIRCLE — SUNBURST


PATTERNS

SPECIAL 1

WEDGE

SPECIAL 2


VARIATIONS

BOOKMATCH PATTERNS

BOX PATTERNS

A

D

G

J

B

E

H

K

C

F

I

L


VARIATIONS

DIAMOND PATTERNS

OTHER PATTERNS

M

P

S

V

N

Q

T

W

O

R

U

X


DURA-BULL SYNTHETIC LEATHER

Dura-Bull synthetic leather combines the elegant appearance and touch

of fine, soft glove leather with the durability and inherent stain resistance

achieved through advanced technology. The same space-age chemistry used

to develop bullet-proof glass and high performance aircraft components has

been successfully applied to fiber and textile engineering to produce the out-

standing characteristics of this material. The nylon fibers are laid down in a

three-directional axis similar to the natural structure of collagen that is found

in leather, resulting in superior durability. Its intrinsic strength makes Dura-

Bull tear and puncture resistant, thus creating a material with considerable

versatility, Dura-Bull can be used used for upholstery, desk inlays, or wall and

panel applications. Because of the special finishing system, the color of Dura-

Bull is an integral part of the material, permanently enriching it with a fresh

appearance that will not fade or lose its beauty over time.



SYNTHETIC LEATHER

J1DB NATURALJ1DE GELATO

J1K4 STUCCOJ1D4 IVORY

J1K3 GRAVELJ1DA EGGSHELL

J1L1 GREYJ1D2 BONE

J1K3 GRAVELJ1D3 RYE

J1K1 TAUPEJ1F1 CAMEL

J1L7 BEAVERJ1G1 RUSSETT

J1L6 OTTERJ1G2 SPANISH TILE

Illustrations are broadly representative of specific leather types.


SYNTHETIC LEATHER

J1J5 BORDEAUXJ1L4 POND

J1J1 BURGUNDYJ1N2 DUSK

J1I3 CHARBROWNJ1N3 BLUE STONE

J1I2 HERSHEYJ1P6 SAGE GREEN

J1SC VIOLETJ1P3 HUNTER GREEN

J1C3 INDIGOPLAIN SLICED ASH

J1C1 NAVYJ1P1 PINE

J1A1 BLACKJ1L9 CINDER



STONE

Wall Goldfinger offers the ability to integrate stone for a truly custom look.

We have an extensive network of stoneyards and work closely with the table

designer and stoneyard to select the specific stone slabs for each project.

We have included 32 of the top stone choices in this catalog. If you don’t see

exactly what you want, let us know. Our extensive network of stoneyards

allow us to source any stone upon request.



STONEG

RAN

ITE M

ARB

LE

AMARELLOSEA FOAM

AURISINA FIORITATAILLON BLACK

ROYAL GREENLABRADOR CHIARO

SAINT LAURENTNEWTON BROWN

MISSISQUOIATIBAIA

NAPOLEON GRAND MELANGECANADIAN RED

PERLATO SICILIAASH ROSE

KARIBIBAMERICAN RED

Illustrations are broadly representative of specific stone types.


STONE

LIM

ESTO

NE

SLA

TE

QU

ARTZITE

TRAV

ERTINE

VERDE CACTUSIVORY ANTICO

NIAGARACEDAR LIMESTONE

WHITE GOLD QUARTZITEJURA BEIGE

VERDE AQUAMARINALAGOS BLUE HONED

ST. PETER DARKUNFADING MOTTLED GREEN & PURPLE

CLASSIC HONEDBLACK SPLIT FACE

NOCE TRAVERTINEUNFADING PURPLE

GIALLO PERSIANOBRAZILIAN GREEN HONED



TABLE EDGES

INLAY PROFILES EDGES


INLAYS AND EDGES

Inlays, profiles and edges offer even more ways to create truly custom

designs. Inlays and edges can be done in a variety of materials, including

veneer, metal and stone.

ARBOR SPECIFICATION GUIDE | TABLE EDGES | 41


INLAY / CROSS BANDING

A

D

G

B

E

H

C

F

I


INLAY / CROSS BANDING

J

M

P

K

N

Q

L

O

R


EDGE TYPES

C Bumper Edge (1½″ or 2″)

D Polished Stainless Steel Edge (1½″ or 2″)

A #100B (1½″ or 2″)

B #835B (1½″ or 2″)


EDGE TYPES

E Brushed Aluminum Edge (1½″ or 2″)

F Statuary Bronze Edge (1½″ or 2″)

G Aluminum Unibody Edge (1½″ or 2″)


EDGE PROFILES

A #100 (1½″ or 2″)

B #836 (1½″ or 2″)

C #572 (2″)

D #829 (2″)


EDGE PROFILES

F #836 (2″)

G #900 (1½″ or 2″)

E #839 (2″)


EDGE DETAILS

A ½″ × 2″ solid edge

E ½″ × 2″ edge, 2” crossband, black ebony ¼″ inlay

C ½″ × 2″ edge, and 2″ crossband

B 2″ × 2″ solid edge

F 2″ × 2″ solid edge, ¼″ statuary bronze

D 2″ × 2″ solid edge, brushed stainless steel ¼″ inlay


EDGE DETAILS

G ½″ × 2″ dual edge

K ¼″ × 2″ brushed statuary bronze edge

I ¼″ × 2″ brushed stainless steel edge

H ¼″ × 2″ brushed stainless steel edge

L ¼″ × 2″ aluminum unibody edge

J ¼″ × 2″ brushed aluminum edge


EDGE DETAILS

M ¼″ × 2″ powder coated Smoke Gray

O ¼″ × 2″ powder coated Satin Chrome

N ¼″ × 2″ powder coated Neutral Light

SMOKE GRAY

CHATEAU BROWN WRINKLE

GEORGIAN GRAY WRINKLE

MAPLE BROWN

FOREST GREEN

GUNMETAL

BRUSHED STEEL

MIST GRAY WRINKE

WESTERN BEIGE

OXFORD GRAY

NEUTRAL LIGHT

NAVY

STARDUST

ANTIQUE BRONZE

FLAT BLACK

AUBURN GRAY

BLACK WRINKLE

CHARCOAL METALLIC

BURGUNDY

FOREST WHITE

SATIN CHROME

STANDARD METAL FINISHES

PREMIUM METAL FINISHES

Illustrations are broadly representative of specific metal types. Please review actual samples before making final selection.



LEGS AND BASES

GANGING LEGS T-BASES PEDESTALS


LEGS AND BASES

Because a table’s leg or base can be an important element of the overall

table design, we also offer a wide variety of table leg and base selections.

Our unique legs and pedestal bases do more than look good — they also

function to support the fast and flexible reconfiguration and easy storage

aspects of Arbor tables.

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 55


TABLE GANGING

“TOGGLE” CONNECTORS

To attach legs to corner table plates: Insert plungers into

holes in the table plates. Flip the latches into the notches

in the leg plate, locking the leg in place. To attach two

tables with one leg: Align the tables so that plates or half-

plates are opposite each other. Insert plungers into holes

in the table plates. Flip the latches into the notches in the

leg plate, to level the tops to each other as well as locking

the leg in place. The system can also be used to gang 3 or 4

tops together using a single leg.

LEG PLACEMENT

When pedestals or T-base legs are used, the Arbor legs

are connected to table tops using the Wall Goldfinger

“Toggle” connector. The leg fastens to the table top with

four latches. There is no loose hardware. Legs can be set

up the standard way of four to a table at the corners (left

column), or they can be placed between two or four tops

(right column), acting as a leveling and ganging device.


TABLE GANGING

ANDERLOC

When pedestals or T-base legs are used, the Anderloc

spans between tables and gangs them together, help-

ing to align multiple table configurations.

“TUNING FORK” CONNECTOR

Our low profile “tuning fork” connector allows for

easy connection of multiple tables without tools.

Simply thread the open notch into the bolt on the

adjoining table and turn to tighten. When not in use

the tuning fork connector remains attached to the

table, thus reducing the risk of any lost parts.


TABLE LEGS

A ROUND

3″ diameter

27¾″ height

¾″ leveler

Square leg series available with raceway wire management | Variety of woods available: Maple, cherry, Honduras mahogany, walnut, and specials | See Accessories for table legs featuring wire management and levelers/casters

B ROUND FLUTED

3″ diameter

27¾″ height

¾″ leveler

C SQUARE

3″ square

27¾″ height

Leveler options

D SQUARE FLUTED

3″ square

27¾″ height

Leveler options


TABLE LEGS

14-gauge tubular steel | Standard available colors: Furniture White, Neutral Light, Western Beige,

Maple Brown, Flat Black, Forest Green, Navy, Burgundy, Stardust, Smoke Gray, Auburn Gray, Oxford Gray,

Georgian Gray Wrinkle, Mist Gray Wrinkle, Chateau Brown Wrinkle, Black Wrinkle, Antique Bronze, Charcoal

Metallic, Satin Chrome, Gunmetal, Brushed Steel

E ROUND METAL

Powder coat

3″ diameter

27¾″ height

¾″ leveler

F ROUND METAL

Powder coat

2″ diameter

27¾″ height

G ROUND METAL

Brushed stainless steel

3″ diameter

27¾″ height

¾″ leveler

H ROUND METAL

Chrome

2″ square

27¾″ height

¾″ leveler


TABLE LEGS

I ROUND METAL

Aluminum

3″ diameter

27¾″ height

¾″ leveler

14-gauge tubular steel | Wire management not available for tapered legs | Variety of Woods available: Maple, cherry, Honduras mahogany, walnut, and specials | See Accessories for table legs featuring wire management and levelers/casters

J ROUND METAL

Bronze

3″ diameter

27¾″ height

¾″ leveler

K ROUND TAPERED

3″ diameter top, 2″ base

27¾″ height

Leveler options

L ROUND TAPERED

3″ diameter top, 2″ base

27¾″ height

Metal ferrule


TABLE LEGS

14-gauge tubular steel | Wire management not available for tapered legs | Variety of Woods available: Maple, cherry, Honduras mahogany, walnut, and specials

M SQUARE TAPERED

3″ square top, 2″ base

27¾″ height

Leveler options

N TAPERED METAL

Chrome

2″ diameter top, 1” base

27¾″ height

Leveler options

O FLUTED LEG

3″ square top

2″ diameter base

27¾″ height

¾″ leveler

P CROSS LEG

Aluminum

3″ square

27¾″ height

¾″ leveler


Powder coating is an advanced method of applying a

decorative and protective finish to a wide range of ma-

terials and products that are used by both industries and

consumers. The powder used for the process is a mixture

of finely ground particles of pigment and resin, which is

sprayed onto a surface to be coated. The charged powder

particles adhere to the electrically grounded surfaces

until heated and fused into a smooth coating in a cur-

ing oven. The result is a uniform, durable, high-quality,

and attractive finish that is extremely durable, providing

superb impact and corrosion resistance. Powder coat-

ing is the fastest-growing finishing technology in North

America, representing over 10% of all industrial finishing

applications. Powder Coating is also RoHS Compliant.

Smoke GrayP10113

Georgian Gray WrinkleP10029

Forest GreenP10140

Mist Gray WrinkleP10117

Oxford GrayP10048

NavyP10112

Flat BlackP10031

Black WrinkleP10030

BurgundyP10143

Chateau Brown WrinkleP10057

Maple BrownP10071

GunmetalP10142

Brushed SteelP10027

Western BeigeP10129

Neutral LightP10114

StardustP10075

Antique BronzeP10141

Auburn GrayP10131

Charcoal MetallicP10116

Furniture WhiteP10023

Satin ChromeP11112

LEG FINISHES

Illustrations are broadly representative of specific painted metal types. Please review actual samples before making final selection.


FOLDING LEGS / BASES

DOUBLE COLUMN GANGING BAR

Pairing our folding mechanisms and rotating them

90° allows for the top to fold rather than the legs. The

mechanisms are linked by a ganging bar which allows

for simultaneous activation of the locking device. The

mechanism combines function and efficiency by allow-

ing the user to operate it from either end of the top.

FOLDING LEG MECHANISM

Wall Goldfinger’s folding leg mechanism features a rug-

ged reinforced nylon chassis with aluminum moving

parts. Positive up and down locks ensure stability in the

upright and folded positions.



BULLNOSED BASE

Our folding bullnose base has the same basic features

and finishes as our T-style base above but utilizes a

flattened oval section aluminum extrusion, 2½″ ×

1½″ nylon end caps complete the base’s cross sup-

port. This style base is not available with a wire

management door.

T-BASE

Wall Goldfinger’s T-style base is fabricated from 2″ diam-

eter steel tubing. It features a reinforced nylon and alumi-

num folding mechanism. The base is available in 21 pow-

der coat colors as well as brushed steel, antique bronze or

polished chrome. An optional wire management door can

be added to the column (available only in powder coat).



CUSTOM ARCH BASE

We now offer a custom built, classic arch style base.

Available in powde coat, brushed stainless or polished

stainless finishes.

OFFSET T-STYLE BASE

Some applications may call for an offset T-style base.

This has all of the same features as the symmetrical

T-style base, opposite.


LOOP LEG

CUSTOM LOOP LEG

The distinctive look of the custom loop leg adds a

contemporary touch to any table design. It can be

used for stand alone tables or to join tables end-to-

end. Available in powder coat, brushed stainless or

polished stainless finishes.


PEDESTAL BASES

PEDESTAL BASE WITH TILT TOP

The lightweight table top tilts 90°, allow-

ing the table to roll on casters through

doorways, etc. Electric, phone and data

connections can be accessed through the

table top doors, and the base door. A wide

assortment of sizes, veneers, and finishes

are available.


PEDESTAL BASES

PEDESTAL BASE WITH REMOVABLE TOP

Wall Goldfinger uses proven fabrication

techniques to create pedestal bases that are

clad in metal. We offer over 100 different

metal finishes, from aluminum and bronze to

brushed stainless steel and swirled copper.


PEDESTAL BASES

STONE TILT-TOP TABLE

Wall Goldfinger has pioneered the use of lightweight

stone panels for table tops, thus making movable stone

tables a reality. Virtually any stone can be incorporated

into the lightweight composite tops. These top panels can

be treated with a “miter fold” edge, as shown, or framed

with wood or metal. Wall Goldfinger has also developed a

folding top mechanism which allows tables mounted on

casters to be rolled through doorways and corridors, and

easily repositioned within a room.


PEDESTAL BASES

SPLIT FOLDING TOP TABLES

The split folding top table is another approach

to issues of portability and storage. These,

too, can utilize lightweight stone, wood,

plastics or artificial leather as the cladding.


PEDESTAL BASES

FOLDING BASE TABLES

This type of table considts of a

one-piece, lightweight top which

is demountable for storage or trans-

port. The base can be folded, creating

an easily moved package.


PEDESTAL BASES

FOLDING TABLE BASE

Bridge tables span between fixed conference tables, creating a flexible table system that can combine to make large

tables, and then fold and roll out of the way for other uses within the conference room. These are available in various

woods and sizes, for use in multipurpose rooms and also offer electric, data and phone connections as options.


PEDESTAL BASES


PEDESTAL BASES

LEVELING SYSTEM

In some cases it may be necessary or desire-

able to place the levelers under the top rather

than in the base. Wall Goldfinger has developed

a system that is adaptable, effective and mini-

mally obtrusive.


LEVELERS

LEVELER DISCS

Knob Style Steel and Stainless Steel Glide is ideal for light-duty load requirements. These low-profile, solid

bottom, large diameter black base glides are perfect for leveling and stabilizing tables without the need for

tools. Useful in both feet and knob applications. 3″ × ½″ and adjustable to ¾″. Available in powder coated

black, brushed stainless steel, and black plastic.

LEVELER

Light duty, black plastic base low-pro-

file feature long-stem extended thread

lengths and hex adjustment.

• 1″ diameter

• ¾″ lift

• black plastic

LOCKING CASTER

Expanded weight distribution prevents

tracks from being pressed into carpet-

ing. Ball bearing pivot points provide

smooth wheel rotation.

• 2″ diameter casters swivel full 360°

• 90 lb. rating per unit

LEVELING CASTER

Protect your hardwood and ce-

ramic floors from scuff marks with

these gentle urethane wheels.

• 2½″ diam wheels adjustable to ¾″

• black metal or stainless steel

• 90 lb. load rating per caster


TABLE ACCESSORIES

COMMUNICATIONS WIRE MANAGEMENT POWER/DATA


TABLE ACCESSORIES

Wall Goldfinger offers an extensive choice of table accessories to fill every

functional need. Accessories are integrated into the overall table design to

manage electrical power, data connections, and communications require-

ments.

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 79


GROMMETS

ROUND PASS THROUGH / FLANGE

1½″, 2″, and 2½″ diameter | Available in woods and plastic colors

PLATED STEEL / FLUSH

Cap sits on recessed liner and is flush with desktop.

Held in place with spring. Available in one, two, or

no-slot configurations. 1¾″, 2½″, and 3″ diameter.

Standard Finishes: Matte Black, Polished Chrome, Satin

Chrome, Black Chrome, Polished Brass, English Antique, and

Satin Nickel

SOLID BRASS

Each grommet cap is made of solid brass, and each liner

is hand-machined from solid brass tubing. Three low-

profile sizes with liner going into hole. The cap sits just 1/8″ high for a trim look. Caps and Liners may be used

alone or as sets. 1⅞″ 2⅛″, 2⅞″ diameter.

Standard Finishes: Matte Black, Polished Chrome, Satin Chrome, Black Chrome, Polished Brass, English Antique, Satin Nickel | Custom finishes: Satin Brass and Satin Bronze

WOOD GROMMETS

Wooden grommets give a warm finishing touch to any

desk. As a natural material, they harmonize with the

desktop, blend in, and complement. Available in a

wide range of functional styles.

Antique Bronze

Polished Brass

PolishedChrome

Satin Chrome

Black Putty Walnut Brown

Light Gray White


TABLE TOP HATCHES

PASS THROUGH ACCESS

Pivoting grommet doors are a simple and durable system for wiring to

pass through to the floor for data connections. The pivot system never

needs adjustment. Standard size is 3″ by 3″. Brushed or polished stainless

steel, bronze, and a variety of wood veneers are available.

Custom sizes and materials are available

METAL DOOR FRAME

METAL DOOR VENEER SURFACE


TABLE TOP HATCHES

SINGLE DOOR ACCESS

Single door access can be incorporated in the table top design

to meet power, data, and communication requirements. The

door can be designed to blend into the overall veneer layout,

or as a design accent.

VENEER

VENEER WITH BRUSH


TABLE TOP HATCHES

STAINLESS STEEL WITH METAL BOX FRAME

BRONZE METAL FRAME


DOUBLE DOOR ACCESS

For applications with greater electrical, data and communications

requirements, a double door access may be the preferred solution.

Double doors can also be designed to provide space to store com-

ponents when not in use. Various finish options are available.

VENEER

VENEER WITH BRUSHES

TABLE TOP HATCHES


STAINLESS STEEL WITH BRUSH

VENEER WITH METAL BOX FRAME

TABLE TOP HATCHES


COMMUNICATION

SPEAKER PHONE

No matter your choice of speaker phone system, Wall Goldfinger

can design a table that allows the system to be discretely stored

when not in use and easily accessed with the touch of a finger.

VENEER HORIZINTAL FLIP-OVER WITH SPEAKER PHONE

VENEER VERTICAL FLIP-OVER WITH SPEAKER PHONE

SPEAKER PHONE SPEAKER PHONE


COMMUNICATION

MICROPHONES

Wall Goldfinger can accommodate a range of microphones,

including built-in, pop up, and removable.

SMALL HATCH WITH REMOVEABLE MICROPHONE

SURFACE MOUNTED MICROPHONES

CLAM SHELL BUTTON MICROPHONEBUTTON MICROPHONE


COMMUNICATION

METAL AND VENEER FLIP-OVER MICROPHONE

METAL FLIP-OVER WITH MULTIPLE BUTTON MICROPHONES

METAL FLIP-OVER DOUBLE MICROPHONE


POWER / DATA UNITS

CABLE CUBBY SERIES TABLE TOP CONNECTOR AND CABLE STORAGE

Provides convenient, inconspicuous routing of and access to A/V power, data, audio, and video connections.

TILT ‘N PLUG TABLE TOP INTERCONNECT BOX

Computer video (15-pin HD), stereo audio, modem (RJ11), network (RJ45) input connections, and AC power connection.

TILT-UP HIDEAWAY SURFACE ACCESS

Surface enclosure with dual power and data connections.


A HINGED DOOR

Access holes are 1″ diameter located at top

and bottom of door and ¾″ W × 19″ H steel

door with self closing hinges. Runs within

2″ of top plate and bottom of column.*

B EXTERNAL

Features plastic invisible hinge

that opens to put wires in. Inside

is ½″ × ½″.

C RACEWAY

1″ × 1″ plastic raceway set

into wooden legs.

WIRE MANAGEMENT

* Standard available colors in Powder Coat. Not available in Brushed Steel, Antique Bronze, or Brushed Chrome


E CROSS COLUMN

A lightweight aluminum leg that incorporates wire

management — a custom Wall Goldfinger propri-

etary extrusion. A clip-in plate can be added to

contain wire management. Anodized or powder

coated finish available.

F DETACHABLE COLUMN GUARD

Easy access wire manager that detaches from

round table leg column to organize wires and

eliminate clutter.

WIRE MANAGEMENT


POWER / DATA UNITS

UNDER TABLE TOP ACCESS

Power and communications low-profile grommet. Left: 15″ length. Right: 10½″ length.

DETACHABLE FIXTURE BOX

Power and communications low-profile fixture box has

black tetured finish and mounts under table top. Fixture

box has (2) receptacles, factory wired with 72″ power

cord and standard tele/data ports.


MODESTY PANELS

PANEL IN BACKHinged panel behind legs

PANEL IN FRONTRemovable panel in front of leg

FULL MODESTYRemovable panel in front of leg

CONCEALED TOGGLE CONNECTOR SYSTEM

Attach and remove full or half modesty panels to table tops with our toggle latch connector. We can apply the connec-

tor system to veneer and metal modesty panels.


TRANSPORT / STORAGE

TABLE TOP STORAGE CART

1200-lb. capacity truck 12-ga. steel with a gray powder-

coated finish. Adjustable rails has red vinyl coating for

nonmarring contact surface. Trucks 5″ dia. phenolic

wheels. Dimension of cart is 38½″ L × 27½″ W × 32½″ H.

PORTABLE LEG CART

Holds all types of legs, black painted MDF with protec-

tive bumper, durable 3″ nylon wheels, and a side stor-

age mount for an ECA attachment. Dimension of cart is

27¾″ L × 22″ W × 28″ H.

VERTICAL TABLE TOP STORAGE CART

Same footprint as our regular table top cart. 1200-lb. ca-

pacity truck 12-ga. steel with a gray powder-coated finish.

Top of rails has red vinyl coating for nonskid, nonmarring

contact surface. Trucks 5″ dia. phenolic wheels. Dimension

of cart is 38½″ L × 27½″ W × 52½″ H.


TRANSPORT / STORAGE

FITTED ENVELOPE

Table tops stored in fabric envelopes, fitted to size,

with velcro enclosure to form fit.

ENVELOPE WRAP

Protect custom furniture while transporting or in

storage. Made of quilted poly/cotton outer fabric with

cotton and synthetic filler. Quilted with lock-stitch-

ing for extra durability.


APPENDIX

TABLE WEIGHTS PUBLICATIONS


TABLE WEIGHTS

Component Description

TABLES 2″ TOP V-1 ½″ WOOD EDGE 2″ WOOD EDGE 3⁄16″ SST 3⁄16″ ALUMINUM

30 x 60 39 lb 50 lb 50 lb 42 lb

33 x 66 46 lb 58½ lb 58½ lb 49 lb

36 x 72 54½ lb 68 lb 68 lb 57½ lb

36 x 84 64 lb 79 lb 79 lb 67½ lb

48 x 48 49 lb 61 lb 61 lb 52 lb

54 x 54 61½ lb 75 lb 75 lb 64½ lb

60 x 60 75 lb 90 lb 90 lb 78½ lb

TABLES 1½″ TOP V-1 ½″ WOOD EDGE 2″ WOOD EDGE 3⁄1″ SST 3⁄16″ ALUMINUM

30 x 60 35½ lb 40 lb 46½ lb 38½ lb

33 x 66 42½ lb 49 lb 54½ lb 46 lb

36 x 72 50½ lb 58 lb 63½ lb 54½ lb

36 x 84 58½ lb 66½ lb 73 lb 63 lb

48 x 48 45 lb 51 lb 56½ lb 48 lb

54 x 54 56 lb 63½ lb 69 lb 60 lb

60 x 60 69 lb 77 lb 83½ lb 73½ lb

TABLES 1½″ TOP L-1 ½″ WOOD EDGE 1½″ WOOD EDGE 3⁄16″ SST 3⁄16″ ALUMINUM

30 x 60 39 lb 48 lb 36½ lb 28½ lb

33 x 66 47 lb 58½ lb 42½ lb 34 lb

36 x 72 56 lb 69½ lb 49 lb 40 lb

36 x 84 65½ lb 81¼ lb 56½ lb 46½ lb

48 x 48 50 lb 62 lb 44 lb 35½ lb

54 x 54 63 lb 78 lb 53 lb 44 lb

60 x 60 78 lb 96½ lb 63½ lb 53½ lb

V-1 = Veneer, L-1 = Majilite synthetic leather, ST-1 = Lightweight stone, SST = Stainless steel

ARBOR SPECIFICATION GUIDE | APPENDIX | 99

TABLE WEIGHTS

Component Description

TABLES 1½″ TOP ST-1 ¼″ ST-1 EDGE ½″ WOOD EDGE 1½″ WOOD EDGE 3⁄16″ SST 3⁄16″ ALUMINUM

30 x 60 72½ lb 75½ lb 80 lb 86½ lb 77½ lb

33 x 66 88 lb 91½ lb 98 lb 103½ lb 112 lb

36 x 72 104½ lb 108½ lb 115½ lb 121 lb 130 lb

36 x 84 122 lb 126½ lb 134 lb 140½ lb 150½ lb

48 x 48 93 lb 96½ lb 102½ lb 108 lb 116½ lb

54 x 54 117½ lb 121 lb 128½ lb 133½ lb 142½ lb

60 x 60 145 lb 149 lb 157 lb 163½ lb 173½ lb

LEGS 3″ WOOD 3″ STEEL 3″ ALUMINUM 2″ STEEL 2″ ALUMINUM X ALUMINUM

8 lb 8 lb 4 lb 6 lb 3½ lb 3 lb

HATCHES 3 × 3″ SST 3× 3″ ALUMINUM 6 × 8″ SST 6 × 8″ ALUMINUM

1 lb ⅓ lb 6 lb 2 lb

LEG PLATE 1½ lb each

V-1 = Veneer, L-1 = Majilite synthetic leather, ST-1 = Lightweight stone, SST = Stainless steel

These weights are approximate and may vary due to specific construction techniques.


PUBLICATIONS

Stone Tables Brochure Specification GuideFIRST EDITION, 2008

This comprehensive guide to stone table design considerations is a valuable resource for designers and specifiers. It contains a wealth of information on stone types, fabrication techniques, and design parameters. Download the brochure in PDF format directly from our website, or contact one of our sales representatives for a printed copy.

PDF | 74.6 MB www.wallgoldfinger.com/publications

eNewslettersSECOND SERIES

Our eNewsletter features the latest news about our company, including new designs and tech-nical achievements. Sign up on our web site for monthly delivery.

www.wallgoldfinger.com/news/subscribe

Postcard CollectionCONTINUING SERIES

Every month Wall Goldfinger issues a postcard featuring a noteworthy recent project. Complete project information is included. If you would like to be added to our postcard mailing list or receive a booklet of all postcards to date, please contact a sales representative.

www.wallgoldfinger.com/contact/salesrepresentatives

http://www.wallgoldfinger.com/publications/boardroom/

http://www.wallgoldfinger.com/news/subscribe.shtml

http://www.wallgoldfinger.com/contact/salesrepresentatives/

ARBOR SPECIFICATION GUIDE | APPENDIX | 101

Arbor Reconfigurable TablesSpecification Guide

Fourth EditionJanuary 2011

Wall Goldfinger, Inc.7 Belknap Street, Suite 3Northfield, Vermont 05663802 | 485-6261802 | 485-6267 (Fax)www.wallgoldfinger.com

Copyright ©2011 Wall Goldfinger, Inc.

Publisher: Wall Goldfinger, Inc.Editorial content revised by John Wall, John Belniak, Douglas WalkerCreative Director: Chuck WeaverDesign and layout by Thor Goodrich

The content of this guide is furnished for informational use only and is dis-tributed for sales representatives of Wall Goldfinger, Inc.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording and/or otherwise, without the prior written permission of Wall Goldfinger, Inc.

Printed and bound inhouse by Carol Edwards and Thor Goodrich

This volume was produced entirely on an Apple® MacPro Dual Core Intel G5 computer with Adobe® InDesign® CS5 software, output to a Canon® CLC-1180 printer, and printed on Mohawk Color Copy 100% recycled 28 lb PC White paper which is manufactured entirely with Green-e certified wind-generated electricity.

W A L L G O L D F I N G E R

7 Belknap Street, Suite 3Northfield, Vermont 05663P 802 | 485-6261F 802 | 485-6267

www.wallgoldfinger.com

©2011

Date post:	12-Nov-2014
Category:	Documents
Upload:	wallgoldfinger
View:	1,575 times
Download:	1 times

WG Reconfigurable Arbor Table Brochure

Documents