NOW STOCKING LIGHTNING PROTECTION

Air Terminals & Adaptors

Connectors, Clamps, Plates & Lugs

Bonding & Grounding Accessories (CADWELD)

Downconductors & Cable Fasteners

Through Roof, Through Wall & Cable Protectors

Surge Protection (CRITEC)

Where do you turn for lightning protection expertise and certification?

Lightning Protection Software Design ACAD Drawings Lightning Protection Training Seminars

Installation CertificationERICO will complete a takeoff of all lightningprotection products and will provide a designand a bill of material. Once the installation is complete, ERICO will coordinate with UL orLPI to obtain a 3rd Party Certification.What we need from you: Roof Plan Exterior Elevations Specifications

:

Tools • Anchoring • Fastening & Hanging Systems • Accessories • Concrete ProductsElectrical • Lighting • Voice & Data • Industrial • Automation • Utility & Lineman’s Gear • Safety

As your work site’s best friend, we support you with expansive tool lines and in-stock solutions, ready for delivery or pick-up at one of our seven convenient locations.

Tool RepairLighting Design

Distribution EquipmentTraining Classes

Specialty FasteningJob Management

your first, last and only source is right around the corner

St. Charles County

88 North Central DriveO’Fallon, MO 63366

Phone: 636-379-2850Fax: 696-379-2871

Branch Manager: Jim SmithJim.Smith@FrostSupply.com

N Ce

ntra

l Dr

Elai

ne D

rW Terra Ln

Brya

n Rd

70

St. Louis County

2429 Schuetz RoadMaryland Heights, MO 63043

Phone: 314-567-4004Fax: 314-997-5776

Dorsett Rd

Schu

etz R

d

Page Ave

270

Dirk.Baecht@FrostSupply.com

2720 Walnut PlaceSt. Louis, MO 63103

Phone: 314-535-5070Fax: 314-535-5289

Branch Manager: Al AsberryAl.Asberry@FrostSupply.com

St. Louis City

Market St

Walnut Pl

Clark Ave S Je

ffers

on A

ve

64 40

Mid-Missouri

1711 Paris RoadColumbia, MO 65201

Phone: 573-875-4151Fax: 573-875-4240

Branch Manager: Joe ErardJoe.Erard@FrostSupply.com

Business Loop 70 E

Paris

Rd

Monroe St

Old

Rt 6

3

Ammonette St

70

Madison County, IL

#2 Business Center CourtCollinsville, IL 62234

Phone: 618-345-7255Fax: 618-345-2584

Branch Manager: Dirk Baecht

Horseshoe Lake Rd

N Bl

uff R

d

Business Center Ct

70

55

157

St. Clair County, IL

20 Commerce LaneLebanon, IL 62254

Phone: 618-206-1900Fax: 618-206-1903

Comm

erce Ln

15864

50

50

Mid-MO Tool, Fastening & Safety

1809 Santa Fe PlaceColumbia, MO 65202

Phone: 573-886-9777Fax: 573-886-0790

Sant

a Fe

Pl

70

Vandiver DrRang

elin

e St

ERICORe: 22 Plex Office

Job No: GA-132991Date: 3/27/2013

PRELIMINARYLIGHTNING PROTECTION ITEMIZED QUOTE

Qty. Part No. Price Total

1100 LPA100250 0.87$ 957.00$ 50 LPA141250 0.61$ 30.45$

150 LPC120250 2.30$ 345.00$ 330 LPA810 0.49$ 161.70$ 120 LPA805 0.36$ 43.22$

LPP899120 A927P023 0.30$ 36.04$

36 LPA222ST 3.76$ 135.49$ 36 LPA30212 8.40$ 302.40$

20 LPA505 1.58$ 31.50$ 4 LPA501 4.00$ 16.00$ 6 LPC502A 6.50$ 39.00$

LPC505 5.62$ LPC501 2.53$

2 LPC517 14.00$ 28.00$

6 LPA556 #VALUE!6 A927F179 0.32$ 1.94$ 6 A928K011 0.04$ 0.24$

LPA540 6.27$

LPA580 13.41$ LPA5962 21.00$ LPA5963 24.15$ LPA5964 27.30$ LPA5966 38.00$ LPA588 31.00$ LPA590 35.70$ LPC580 20.47$ LPC5962 26.45$ LPC5963 29.56$ LPC5964 36.57$ LPA5966 38.00$ LPC588 65.52$ LPC590 73.71$

6 615800 20.45$ 122.70$ 1 GTC168C 121.74$ 121.74$ 1 115PLUSF20 10.64$ 10.64$ 1 GYE162Q 340.94$ 340.94$ 1 150PLUSF20 13.32$ 13.32$ 1 PLUSCU 174.78$ 174.78$ 1 EGRD58 246.07$ 246.07$ 1 T403 21.80$ 21.80$ 1 T396 53.30$ 53.30$ List Price for Materials Only #VALUE!

CADWELD Mold SealerTool Box (included in Complete Tool Kit T315A)

MOLD,CABLE TO GRD ROD,VERT TEE HORZ THRUCADWELD® PLUS Grounding Welding Material - Type F20MOLD,CABLE TO GRD ROD,VERT X HORZ THRU CADWELD PLUS Grounding Welding Material - Type F20

Pipe Bonds

Grounding

5 foot Driver Rod Driver with insert for 5/8" Ground Rods

Pipe Bond, Cu, 8.625" - 10.750" O.DPipe Bond, Cu, 6.625" - 8.625" O.DPipe Bond, Alum, 4.5" - 6.5" O.D

IMPROVED DESIGN - CADWELD® PLUS Control Unit

5/8" X10' Copper Bonded Ground Rod 10 Mil

NUT,HEX,1/4-20,18-8SSTL

Cable and Fasteners

Air Terminals and Bases

Splicers

Bonds

Splice, Bimetallic, Parallel, 1-1/2" Contact

Splicer, Alum, Parallel Crimp, CableSplice, Alum, Tee Crimp, Cable

Pipe Bond, Alum, 8.625" - 10.750" O.DPipe Bond, Alum, 6.625" - 8.625" O.DPipe Bond, Alum, 4.5" - 6.5" O.DPipe Bond, Alum, 4" - 4.5" O.D

Pipe Bond, Cu, 4" - 4-1/2" O.DPipe Bond, Cu, 2-3/4" - 3-5/8" O.DPipe Bond, Cu, 2" - 2-3/4" O.DPipe Bond, Cu, 0.75" - 1.315 O.D

Cable, Smoothweave, Alum, 24 x 14 Gauge

Pipe Bond, Alum, 2.75" - 3.625" O.DPipe Bond, Alum, 2" - 2.75" O.D

Splicer, Cu, Parallel Crimp, Cable

Pipe Bond, Alum, 0.75" - 1.315" O.D

Bonding Plate, Alum, 8" sq Contact

Splicer, Cu, Tee Crimp, CableSplicer, Cu, Parallel, 2" Contact

BOLT,HEX HEAD,1/4-20 X 3/

Air Term, Al. 1/2" x 12" Safety TippedBase, Al., 1/2", Universal Mount

Description

SCREW,SHEET METAL,#10X5/8

Al. 5/8" Cable Strap, One HoleAl. Stamped Adhesive Cable HolderCable, Smoothweave, Cu, 29 x 17 GaugeSoft Solid Round, Alum, 4 AWG

Note: Installer shall be responsible for verifying all products and quantities prior to placing order to ensure a complete lightning protection system as requiredfor code compliance.

Size and quantity of required pipe bonds, associated cable, and splicers shall be determined by others.

1

2

3

456

7

891011

12

13

Compliance to NEC 250-46. Contractor is responsible for maintaining a 6'-0" distance from lightning protection system conductor to all conductive metal components.Lightning protection materials for any other buildings, additions, and structures, new or existing.

Bonding of interior or exterior doors, windows, and louvers.Bonding of interior or exterior electrical or mechanical equipment, etc.Grounding resistance tests and ground rod test wells.Labor estimates and materials for cutting and patching paved or landscaped areas for process of installing lightning protection system grounding.

1" PVC conduit, fastened and installed as raceway for routing exposed or concealed downlead cables.Trenching and backfilling for below grade routing of counterpoise ground loop cable at 18" minimum depth.Bond to underground metal piping systems entering buildings as required by UL, NFPA, and LPI standards on water, gas, storm, sanitary, conduit, and other such pipes.Special systems grounding of electrical system bonds to building steel, signal reference grounds, bus bars, electrical service entrance grounding, transformer grounding, telephone system grounding, etc.

Unless otherwise specified above, the following items ARE NOT INCLUDED in the lot materials price but are necessary to provide a complete lightning protection system per standards and specifications.

Surge protectors, required on certified lightning protection systems per UL, NFPA, and LPI standards on electrical, telephone, data, cable TV, and other such service line entrances.For projects requiring UL Master Label Certification, a UL 96A compliant surge protection device must be installed at the main service entrance panel. This SPD must comply with UL 96A, UL 1449 Ed. 3, and must have the appropriate UL markings in order to receive the UL Master Label Certification. Devices that meet UL 1449 Ed. 3 alone do not satisfy the new 2011 UL requirements for UL Master Label Certification. The device must meet both UL 1449 Ed. 3 and UL 96A.Our bid includes lightning protection materials for roof circuits and wall downleads only. Below grade grounding systems for all buildings and structures are not included and must be furnished by others.

ERICOERICO, Inc. Contact: Steve Heine

34600 Solon Rd. Phone: 440-528-3752

Solon, OH 44139 Fax 440-848-8592

USA E-mail: sheine@erico.com

Bid Date:

To:

LIGHTNING PROTECTION MATERIALS QUOTATION

System Design Type Conductor Type Materials Building

Roof Material Type

Air Terminal Size

Downleads Component Type

Ground Loop

Roof Type Grounding

Standards Requirements Design Criteria

L.P. Spec. Section:

Drawings:

Addendum Reviewed:

Documents to be provided Terms/Conditions

Upon receipt of order Note: Freight allowed is $1,500.00 net

Following installation

Note: 1)

2)

* Add for UL Certification

** Add for LPI Certification

ERICO, Inc. Reserves the right to charge for design drawings.

See Attached Bill(s) of Materials, Excluded Items, and Comments

Contact Person:

CC MM: Chuck Cooley Steve Heine

CC CSR: Nancy Brown

CADDY® • CADWELD® • ERITECH® • FLEXIBAR® • LENTON®

2/18/2013

Ground Rods are packaged and sold in

bundles of five only.

CADWELD weld metal sold in standard

packages only.

NFPA 780

UL 96, 96A

LPI 175, 176

Submittal DrawingsCatalog Data

UL Master Label*

UL Letter of Findings

UL Reconditioned Master Label

LPI Certification**

LPI Conditional Certification

Net 30 Days

Add Sales Tax

30 Days Acceptance from:

Exposed

Semi-Concealed

Concealed

Cable

Structural Steel

Cable

Structural Steel

Flat

Standing Seam

Copper

Aluminum

Stamped

Cast

Mechanical

CADWELD

Class I

Class II

12 in.

24 in.

Class I/II

4/0

Re: 22 Plex Office Contact: Steve Heine

Job No: GA-132991

25 ft.

606 ft.

LIGHTNING PROTECTION MATERIALS LINEAR FOOT QUOTATION

Qty Total

* 775 Feet of Perimeter Cable (Includes air terminals, bases, conductor, and holders) 775 $1,253.44

* 450 Feet of Cross Run Cable (Includes air terminals, bases, conductor, and holders) 450 $570.21* 7 Secondary Bonds 10 70 $87.24

* 7 Downleads to Grade 18 Feet 126 $507.79

7 Grounding Locations 10 70 $481.58

1 CADWELD Materials (Includes, molds, shots, and igniter) $368.52

List Price for Materials Only $3,922.80

List Price for UL96A Compliant Surge Protection Device * See Note 2 $850.00

Price for UL Master Label Certification $1,400.00

Total Price $6,172.80

Installation time in man hours (Inexperienced Installer) 67

Installation time in man hours (Experienced Installer) 41

1267 Roof Cable 126 Downlead Cable Ground Loop Cable

48 Air Terminals/Bases 445 Cable Holders/Clips 14 Miscellaneous Fittings

Thru-Roof Penetrations 70 PVC 7 Ground Rods/Clamps

1

2

3

4

5

6

7

8

9

10

11

12

13

Bonding of interior or exterior doors, windows, and louvers.

Bonding of interior or exterior electrical or mechanical equipment, etc.

Grounding resistance tests and ground rod test wells.

Labor estimates and materials for cutting and patching paved or landscaped areas for process of installing

lightning protection system grounding.

Compliance to NEC 250-46. Contractor is responsible for maintaining a 6'-0" distance from lightning

protection system conductor to all conductive metal components.

Lightning protection materials for any other buildings, additions, and structures, new or existing.

Our bid includes lightning protection materials for roof circuits and wall downleads only. Below grade

grounding systems for all buildings and structures are not included and must be furnished by others.

1" PVC conduit, fastened and installed as raceway for routing exposed or concealed downlead cables.

Trenching and backfilling for below grade routing of counterpoise ground loop cable at 18" minimum depth.

Bond to underground metal piping systems entering buildings as required by UL, NFPA, and LPI standards on

water, gas, storm, sanitary, conduit, and other such pipes.

Special systems grounding of electrical system bonds to building steel, signal reference grounds, bus bars,

electrical service entrance grounding, transformer grounding, telephone system grounding, etc.

For projects requiring UL Master Label Certification: As of 12/03/2012, UL no longer requires the

inspection of surge protection devices at the main service entrance, but that omission will be noted on

the certificate. ERICO still recommends a UL 96A and UL 1449 Ed. 3 compliant device, and has

included it in this quotation.

ERICO

Height of Building

Perimeter of Building

Description

Unless otherwise specified above, the following items ARE NOT INCLUDED in the lot materials price but are

necessary to provide a complete lightning protection system per standards and specifications.

Surge protectors, required on certified lightning protection systems per UL, NFPA, and LPI standards on

electrical, telephone, data, cable TV, and other such service line entrances.

UL and the UL logo are trademarks of UL LLC © 2012 Unauthorized reproduction or alteration of this certificate constitutes fraud.

This certificate is for reference use only. To verify Master Label Certificate, please refer to website: https://lps.ul.com

Lightning Protection Services

Certificate Number 735B-15F9DD

Inspection Date 05/30/2013

Expiration Date 05/30/2018

MASTER LABEL® CERTIFICATE OF INSPECTION For

LIGHTNING PROTECTION SYSTEMS

This certificate reports the findings of an inspection by Underwriters Laboratories of a lightning protection system. The inspection was conducted using all applicable sections of UL 96A, Installation Requirements for Lightning Protection Systems, Twelfth edition, issued on 10/04/2010. The system was found to comply with these requirements at the time of inspection.

The following item(s) were omitted from the scope of the Inspection:

Communication surge protection system was not inspected. Surge protection devices are an integral component of a complete lightning protection system and should be provided on all incoming and exiting electric, power, data, and communication services.

Structure: BAPTIST MEDICAL OFFICE BUILDING CLAY COUNTY (EXCLUDING INCONNECTING WALKWAY) Address: 1747 BAPTIST CLAY DRIVE FLEMING ISLAND, FL 32003 UNITED STATES

Installing Company: ERICO INC Address: 34600 SOLON RD SOLON, OH 44139

This certificate is only valid for five years based on UL's reasonable estimate that the system will remain unchanged. Any modifications to electrical, mechanical or communication systems of the structure will affect lightning protection devices and may render protection afforded by this system ineffective. These changes will invalidate our certificate earlier than the five year period.

Underwriters Laboratories 333 PFINGSTEN ROAD, NORTHBROOK, ILLINOIS 60062