www.maag.com
EnviroGear®Seal-less InternalGear Pumps
W h e r e I n n o v a t i o n F l o w s
Maag , part of Dover Corporation’s Pump Solutions Group (PSG®), is a leading global provider of innovative, high-quality industrial gear pumps for the safe and efficient transfer of liquids . Maag is proud to offer EnviroGear®, a durable and environmentally friendly positive displacement seal-less gear pump. EnviroGear pumps save you money by providing a low initial cost, high performance and low maintenance costs.
Our world-class distributor network ensures that you will have access to the pump you need when you need it. We are devoted to your business’s success, servicing your needs with world-class products, delivery and best-in-class expertise. EnviroGear combines all of this while offering some of the shortest gear pump lead times in the industry. Put us to the test today and contact your local distributor at www.maag.com
Our revolutionary seal-less design with patented between-the-bearing support system effectively eliminates leaks and mechanical wear, helping to increase personal and envi-ronmental safety. Leveraging unique patented design features, EnviroGear is not just a magnetically coupled, mechanically sealed or traditional internal gear pump. EnviroGear has completely reinvented internal gear pump technology with a true engineered solution specifically designed from the inside-out for environmentally conscious fluid handling, both for thin fluids, as well as hard-to-seal viscous fluids.
• Adhesives• Biofuels• Chemicals• Foodprocessing• Lubeoilandgrease• Paintandcoatings
• Petrochemical• Petroleumadditives• Polyurethane• Printing• Resins• Soaps
• Patentedbetween-the-bearingsupport system technology• Highreliabilityanddurability• 50%reductioninmaintenancecosts• Lowestoverallcostofownership• Increasedenvironmentalandfluid- handling safety
• Single-fluid-chamberseal-lessdesign eliminates leaks• Interchangeablewithmechanically sealed and packed gear pumps
More Cost-Effective Pumping SolutionA Safer, Greener,
EnviroGearPumps are Ideally Suited For…
EnviroGearFeatures
Seal-lessInternal Gear Pump
S e r I e S
MagneticHousingAssembly PatentedRotorMagnet
Assembly
Patented Containment Canister
Patented EccentricSpindle
Casing
PumpHead
Idle Gear
Interchangability Allows Upgrading Existing Gear Pumps With Minimal Installation CostsEnviroGear pumps have been designed to be inter-changeablewithupto95%oftheinternalgearpumpsthat are currently available in the market. That means no piping changes, no driver changes, no coupling changes, no flow-rate changes and no baseplate changes. The EnviroGear side-ported casing is also interchangeable with a number of lobe pumps.
E1-Series: EnviroGearSeal-Less Internal Gear Pump
OneFluidChamber Forenhanced Reliability,Fluid Safety
The EnviroGear DesignThe EnviroGear uses magnets mounted directly to the rotor, eliminating the adapter plate, allowing for a single-fluid cham-ber. This single fluid-chamber design results in a much shorter, simpler flow path and allows the pump to easily handle fluids with highviscositiesupto50,000cStwhileincreasingbearinglife and cleanability.
One Fluid Chamber
EnviroGear Design
E1-2/4 = 32 mm (1-1/4")
E1-24/32 = 41 mm (1-5/8")
E1-55/69/82 = 51 mm (2")
EnviroGear Spindle Diameters
EnviroGear Eccentric Spindle(3 Support Locations)
Between-the-BearingSupport System For Increased Durability
The EnviroGear DesignThe patented EnviroGear design supports the rotor and idler gears at three crucial locations with an Eccentric Spindle that is supported in the head, the crescent location and the back of the containment canister, eliminating much of the effects of cantilevered load. Larger diameter, harder materials provide
more rigid support for less shaft deflection and bearing wear. Materialsare4140carbonsteelor17-4PHstainlesssteel.Large,longradial bushings support the entire length of the rotating element, which spreads out the hydraulic forces and allows the bushings to last longer.
3 Large Radial Bushings(Premium-Grade Carbon Graphite)
Available(consultfactoryfordetails).enviroBase Baseplate Systems
Description Part Ductile-IronModels
Carbon-SteelModels
Stainless-SteelModels
Pressure Containing
Casing,Head Ductile Iron Carbon Steel StainlessSteel(CF8M)RVBody Carbon Steel StainlessSteel(CF8M)Canister Stainless Steel (316)
Product Contact
Rotor,Idler Carbon Steel StainlessSteel(17-4PH)
Spindle AlloyCarbonSteel(4140)(opt.abrasion-resistantversion is surface-hardened) StainlessSteel(17-4PH)
RotorSleeve Stainless Steel (316) Stainless Steel (316)RVSpring StainlessSteel(302) StainlessSteel(302)Bushings CarbonGraphite,BronzeorTungstenCarbide CarbonGraphiteorBronze
O-Rings Viton(DuPontTypeA),Teflon®-encapsulatedViton,Teflon®-encapsulatedSiliconeor any commercially available O-ring
Non-Product Contact
MagnetHousing Ductile IronShaft AlloyCarbonSteel(4140)
*Consultfactoryfordifferentialpressuresbelow1.4bar(20psi).
Parameter Configuration Rating
* Differential Pressure Ductile iron, carbon steelstainless steel
* 1.4to13.8bar (20to200psi)* 1.4to10.3bar (20to150psi)
Temperature Ductile iron, carbon steelstainless steel
-40to260°C(-40to500°F)-40to260°C(-40to500°F)
Viscosity All 0.5to50,000cSt
Model Max.RPM [email protected] 1800 3.4 m3/hr (15gpm)E1-4-CS 1800 6.8m3/hr(30gpm)
E1-24-DIorCS 780 17.0m3/hr (75gpm)E1-32-DIorCS 780 22.7m3/hr(100gpm)E1-55-DIorCS 640 30.7m3/hr (135gpm)E1-69-DI or CS 640 38.6m3/hr(170gpm)E1-82-DIorCS 640 45.4m3/hr (200gpm)
Ductile Iron, Carbon Steel
Model Max.RPM [email protected] 1200 2.3m3/hr (10gpm)E1-4-SS 1200 4.5m3/hr(20gpm)E1-24-SS 640 12.5m3/hr (55gpm)E1-32-SS 640 18.2m3/hr(80gpm)E1-55-SS 520 25.0m3/hr (110gpm)E1-69-SS 520 31.8m3/hr(140gpm)E1-82-SS 520 36.3 m3/hr (160gpm)
Stainless Steel
Printed in the U.S.A. Copyright 2012 Pump Solutions Group (PSG), A Dover Company PSG-100XX-C-XX
A u t h o r i z e d P a r t n e r :
Printed in the U.S.A. Copyright 2013 Pump Solutions Group (PSG®), A Dover Company MAAG-13000-C-01
www.maag.com
PSG® reserves the right to modify the information and illustrations contained in this document without prior notice. This is a non-contractual document. 01-2013
WhereInnovationFlows
22069VanBurenStreetGrandTerrace,CA92313-5651
T:909-422-1731•F:909-783-3440
ABAquE™PERISTALTICPuMPS
mouvex.com
ALMATEC®AIR-OPERATED
DOuBLE-DIAPHRAGMPuMPSalmatec.de
AuTOMATIkPELLETIzING SySTEMS
maag.com
BLACkMER®VAnEPuMPS&COMPRESSORS
blackmer.com
FLuIDDynAMICS™POLyMERBLEnDInGSySTEMS
fluiddynamics1.com
GRISWOLD™CEnTRIFuGALPuMPS
griswoldpump.com
MAAG FILTRATIOn
PLASTICMAnuFACTuRInG& PROCESSInGFILTRATIOn
maag.com
MAAG InDuSTRIALPuMPS
GEAR&SCREWPuMPSmaag.com
MAAG PuMPSySTEMSExTRuSIOnPuMPS&SySTEMSmaag.com
MOuVEx®ECCEnTRICDISCPuMPS,VAnEPuMPS&COMPRESSORSmouvex.com
nEPTunE™DIAPHRAGM(METERInG)PuMPS,POLyMERSySTEMS&MIxERSneptune1.com
quATTROFLOW™quATERnARyDIAPHRAGM PuMPTECHnOLOGyquattroflow.com
REDSCREW™SCREWPuMPSredscrewpump.com
SySTEM ONE®CEnTRIFuGALPuMPSblackmer.com
WILDEN®AIR-OPERATED DOuBLE-DIAPHRAGMPuMPSwildenpump.com
PSGBrands