Good Ideas In PractIce
Tanktainer Platform Trailer
WCI 542Lower OverlandCorner Casting
WCI 4125AluminiumCorner Fitting
WCI 151/3Fabricated Retractable Twistlock
WCI 151/2RetractableTwistlock
ISO Container ‘A’ Frame FlatrackWCI 522 Flush Fit(High Door Access)
WCI 500Weldseal Door Hinge
WCI 20000Corner Casting
WCI 20100Corner Casting
WCI 151/3TwistlockAlt WCI 1180
WCI 20000Corner Casting
WCI 4190 Bail Bar
WCI 1205Locking Plate
WCI 1231 ShearblockWCI 1232 ConeWCI 1620 Twistlock
SkidcastingWCI 1225Channel BeamWCI 1202Box Beam
WCI 1195Locking Plate
WCI 1201 Load RestraintRing Channel Mounted
WCI 1197Lashing Bracket
WCI 1195Lashing Bracket
Quadron Container Skeletal Trailer
WCI 1212Interconnector
WCI 4540Topconnector
WCI 149 NRSNon-Retractable Screwdown Twistlock
WCI 149 2NRNon-Retractable Twistlock
William cook Intermodal
+44 (0)1388 528 2481BS EN ISO 9001:2008
LRQ 4006347
001
Mini Container Rail Car
WCI 1073Mini Corner CastingWCI 4620
Mini Corner Casting
WCI 623U.I.C. Spigot
WCI 148 RNSRetractable Non-Screwdown Twistlock
WCI 1965Non-Retractable Rail Twistlock
WCI 4716U.I.C. Spigot
WCI 4405U.I.C. Spigot
William Cook Stanhope_p1.indd 1 17/02/2012 10:38
A Container product for every application ...
Container Corner CastingStandard ISO type to suit all requirements. Size 178 x 162 x 118. Also available in stainless steel.Type WCI 20000 - Lower.Type WCI 20100 - Upper.
Mini-Box Corner FittingDesigned to suit off-shore and mini-containers, this corner fitting is supplied as a one-piece casting, thereby overcoming the inconsistencies commonly associated with fabricated designs.Type WCI 1073.
Europe - Overland Corner Casting U.I.C.To meet all requirements for 2.5m wide containers and swap bodies.Type WCI 542 - Lower.
Europe - Overland Corner Casting U.I.C.To meet all requirements for 2.55m wide containers and swap bodies.Type WCI 4450 - Lower.
ISO Aluminium Container Corner FittingAluminium corner fitting to meet ISO 1161. Most suitable for use on tank and bulker containers.Type WCI 4035 ISO - Upper.Type WCI 4045 ISO - Lower.
Mini-Box Corner FittingDesigned specifically for offshore containers with a length to width ratio of 1:1 up to 1.25:1Type WCI 4620.
Lifting EyeDesigned for 20’ x 8’ boxes.Type WCI 4588.
Overland Aluminium Lower Container Corner FittingTo suit 2.5m wide and 2.55m wide tank and bulker containers.Type WCI 4125 - 2.5m.Type WCI 4425 - 2.55m.
Aluminium Container Corner CastingHigh quality for military shelter and industrial use S.W.L. 3250kg.Type WCI 1069/1070.
Weldseal Door HingeThis William Cook Intermodal patented door hinge completely seals against water ingress. When normal welding takes place the heat causes a mastic type sealant on the rear face to expand thus eliminating this known corrosion trap.Type WCI 500 Series.
William Cook Intermodal
+44 (0)1388 528 248
Container produCts for the transport industry
2BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p2_p3.indd 1 17/02/2012 10:40
High Door Access Corner FittingFor increasing door height by 32mm.Type WCI 522 - Uppers.
Container Corner Casting Standard ISO type to suit German market. Size WCI 91300 - Lower ( Height 125mm)Type WCI 91400 - Upper.
Twistlock Aperture CastingThis casting has been designed for fabrication into demountable body systems for twistlock securing operations.Type WCI 1035.
Products to suit your requirements.
Marine TwistlockDesigned for multiple stacking of containers or swap bodies.Type WCI 1515.
Container Corner Casting ISO Extended Top ApertureFor use on fixed and folding end flatracks.Type WCI 263.
Top InterconnectorFor use in connecting small military containers into 20’ units.Type WCI 4540.
Bottom InterconnectorFor use in connecting small military containers into 20’ units.Type WCI 1212.
The assurance of choice and performance.William Cook Intermodal have been supplying container products since the start of containerisation in the mid-1960s. Millions of quality components to meet the most stringent requirements have been supplied. By specifying William Cook, you can be assured of the right product to meet your needs.*Due to our policy of continuous product design and development we are regularly increasing our product range.
William Cook Intermodal
William Cook IntermodalStanhope Co Durham DL13 2YR Englandphone +44 (0)1388 528 248 fax +44 (0)1388 528 879Web www.william-cook.co.uk email [email protected] 3
William Cook Stanhope_p2_p3.indd 2 17/02/2012 10:40
Container ProduCts
ISO Container
Mini Container
Tanktainer
Flatrack
WCI 500Weldseal Door Hinge
WCI 20100Upper Corner Casting
WCI 20000Lower Corner Casting
WCI 542 LowerOverland Corner Castings
WCI 4450Overland Corner Casting for 2.55m wide
WCI 1073 and WCI 4620 Mini Corner Fitting
WCI 4125Aluminium Corner Fitting
WCI 263Extended Aperture Casting
William Cook Intermodal
+44 (0)1388 528 2484BS EN ISO 9001:2008
LRQ 4006347
001
William Cook Stanhope_p4.indd 1 17/02/2012 11:50
Container Dimensions
BR
BL
TR
BL
TL
TR
TL
LS
William Cook Intermodal
+44 (0)1388 528 248
Type of Container
ISO 40’
ISO 30’
ISO 20’
ISO 10’
L (mm) S (mm)
12192 11985
9125 8918
6058 5853
2991 2787
0-10
+4-6
0-10
+4-6
0-6
+3-5
0-5
+3-5
LengTh
5BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p5_p6.indd 1 17/02/2012 11:51
teChniCal information
WCI 4425(Aluminium) WCI 4450
(Steel)
145 2260 145
WCI 4125(Aluminium)
WCI 4035WCI 4045WCI 1069WCI 1070
(Aluminium)
WCI 20000WCI 20100
(Steel)
89 2260 89
WCI 542(Steel)
120 2260 120
2.55m Wide Container
2.5m Wide Container
Standard 8’- 0” Wide ISO Container
William Cook Intermodal
William Cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 fax +44 (0)1388 528 879Web www.william-cook.co.uk email [email protected] 6
William Cook Stanhope_p5_p6.indd 2 17/02/2012 11:51
ISO COrner CASTIngS - Type WCI 20100/WCI 20000
©
©
©
William Cook Intermodal
+44 (0)1388 528 248
Standard ISO type to suit all requirements.
Made in accordance with ISO 1161/BS 3951 and Lloyds Register Guidance Note A.
Also available in Stainless Steel.
Top CornerType WCI 20100 Weight 10.5kg (23.0lbs)
Bottom CornerType WCI 20000 Weight 10.5kg (23.0lbs)
These products are made from special William Cook steel designed for low temperature working at -40oC as standard.
RH as drawnLH opposite
7BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p7_p8.indd 1 17/02/2012 11:51
©
ISO COrner CASTIngS - Type WCI 91400/WCI 91300 (German)
©
©
William Cook Intermodal
Made in accordance with ISO 1161/BS 3951 and Lloyds Register Guidance Note A.
Also available in Stainless Steel.
Top CornerType WCI 91400 Weight 11.50kg (25.0lbs)
Bottom CornerType WCI 91300 Weight 11.75kg (26.0lbs)
These products are made from special William Cook steel designed for low temperature working at -40oC as standard.
RH as drawnLH opposite
William Cook IntermodalStanhope Co Durham DL13 2YR EnglandPhone +44 (0)1388 528 248 Fax +44 (0)1388 528 879Web www.william-cook.co.uk email [email protected] 8
William Cook Stanhope_p7_p8.indd 2 17/02/2012 11:51
Lower Corner Casting for 2.55m wide Containers -Type WCI 4450
©
william Cook Intermodal
+44 (0)1388 528 248
• Tosuit2.55metrewideDryFreight,ReeferandTankContainers.
• AperturesatISOSeries1containerpositions.
• Clearancefortrailerlip.
• AlsoavailableinStainlessSteelandAluminium.
This product is made from special William Cook steel designed for low temperature working at -40oC as standard.
©
RHasdrawnLHopposite
9BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p9_p10.indd 1 17/02/2012 11:53
twistLoCk aperture Casting - Type WCI 1035
©
william Cook Intermodal
©
• Designedforfabricationinto de-mountablebodysystems.
• StandardISOaperturetosuitalltypesof Twistlockhead.
• FullISOcornercastingfootprint.
RHasdrawnLHopposite
william Cook IntermodalStanhopeCoDurhamDL132YREnglandphone+44(0)1388528248Fax+44(0)1388528879webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 10
William Cook Stanhope_p9_p10.indd 2 17/02/2012 11:53
ISO ExtEndEd tOp ApErturE CAStInGS -Type WCI 263/WCI 430 For Fixed or Folding End Flatrack
©
©
See Note*
©
See Note*
William Cook Intermodal
+44 (0)1388 528 248
• Classification Society approved.
• Extra length top aperture WCI 263 - ISO + 10mm = 134mm WCI 430 - ISO + 20mm = 144mm
Offers the user the following important advantages:• Longer aperture allows quick spreader location and helps to prevent damage.
Note*• End aperture must be blanked off prior to container going into service, to prevent ‘hook lifting’. (Ref: ISO1496-5).
Type WCI 263 Weight 10.6kg (23.3lbs)
Type WCI 430 Weight 11.1kg (24.4lbs)
These products are made from special William Cook steel designed for low temperature working at -40oC as standard.
11BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p11_p12.indd 1 17/02/2012 11:54
FluSh FIt hIGh dOOr ACCESS CAStInG - Type WCI 522
©
©
William Cook Intermodal
• For use on all ISO Series 1 containers.
• Classification Society Approved.
• Patents Pending.
Offers the user the following important advantages:
• Allows increased door height up to 32mm.
• Nine high stacking capability.
• Allows reduced welding by up to 30%.
• Reduction of time process - header cut square without notching.
• Weld preparations on the casting.
• Reduction of repair costs - header removed with straight cut.
Type WCI 522 Weight 10.9kg (24.0lbs)
This product is made from special William Cook steel designed for low temperature working at -40oC as standard.
RH as drawnLH opposite
William Cook IntermodalStanhope Co Durham DL13 2YR Englandphone +44 (0)1388 528 248 Fax +44 (0)1388 528 879Web www.william-cook.co.uk Email [email protected] 12
William Cook Stanhope_p11_p12.indd 2 17/02/2012 11:54
EuropEan ovErland CornEr CaSting - Type WCI 542
William Cook Intermodal
+44 (0)1388 528 248
Type WCI 542 Weight 14.4kg (31.7lbs)
This product is made from special William Cook steel designed for low temperature working at -40oC as standard. For 2.5 metre wide Dry Freight, Reefer and Tank Containers.
©
©
RH as drawnLH opposite
13BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p13.indd 1 17/02/2012 11:55
©
Type WCI 4035• TheCornerFittingsaremanufacturedfromhighstrengthextruded aluminium.
• AL-ZN5-Mglwiththefollowingmechanicalproperties. a) Tensilestrength=350N/mm2(34KP/mm2). b) Tensileproofstress=(at0.2%) 290N/mm2(28KP/mm2). c) Elongation%5.65x√area=10%.
Top CornerType WCI 4035 Weight 4.5kg (10.0lbs)
These products are designed, manufactured and tested to meet the requirements of ISO1161.
Aluminium Corner Fittings - Type WCI 4035/4045/4125/4425
©
William Cook Intermodal
+44 (0)1388 528 248
RHasdrawnLHopposite
14BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p14_p15.indd 1 17/02/2012 11:55
Aluminium Corner Fittings
Type WCI 4045
Bottom Corner Weight 4.5kg (10.0lbs)
Type WCI 4125Overland Type
Bottom Corner Weight 5.0kg (11.16lbs)
Type WCI 44252.55m
Bottom Corner Weight 5.0kg (11.16lbs)
©
©
©
©
©
©
©
William Cook Intermodal
RHasdrawnLHopposite
RHasdrawnLHopposite
RHasdrawnLHopposite
William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248Fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 15
William Cook Stanhope_p14_p15.indd 2 17/02/2012 11:55
Aluminium Corner CASTinGS - Type WCI 1069/1070
William Cook Intermodal
+44 (0)1388 528 248
Type WCI 1069 shown below• Forlightweightmilitaryshelterandindustrialuse.
• Highstrengthweldablealuminiumalloycasting.
• DesignedforaSafeWorkingLoadof3250kg.
• BS1490LM25TF.
These products are designed for a Safe Working Load of 3250kg and are manufactured to dimensionally comply with ISO1161-1984.
©
16BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p16_p17.indd 1 17/02/2012 11:57
TeChniCAl informATion
Type WCI 1069 • Lowercornercasting.
Weight 4kg (8.9lbs).
S.W.L.3250kg(7150lbs).Lefthandcornerdrawn,righthandopposite.
Type WCI 1070 • Uppercornercasting.
Weight 4kg (8.9lbs).
S.W.L.3250kg(7150lbs).Righthandcornerdrawn,lefthandopposite.
178
118
162
178
118
162
©
©
William Cook Intermodal
William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 17
William Cook Stanhope_p16_p17.indd 2 17/02/2012 11:57
Weld Seal door Hinge - Type WCI 500
• ContainerDoorHingecompletewithheatreactingsealant.
• Automaticallysealswellknowncontainerdoorcorrosiontrapbehind thehinge.
• Sealantexpandsupto100%duringwelding.
• Self-lubricatingnylonbushes,givessmoothdooroperation.
• Availableinselfcolour,galvanisedandelectroplatesurfacefinish.
• Mountingbracketsandstainlesssteelhingepincanbesuppliedextra.
• Worldwidepatents.
©
William Cook Intermodal
+44 (0)1388 528 24818BS EN ISO 9001:2008
LRQ 4006347
001
William Cook Stanhope_p18_p19.indd 1 17/02/2012 11:58
Hingescanalsobesuppliedtocustomersowndesign/dimensions
Hinge Fittings
WCI 982 Stainless Steel Hinge Pin
WCI 4383 Hinge Bracket
63.5
Sealant
‘A’
‘B’
6.5
38
38
93.5
ø12.7
© ©
©
©80
8
13
8
TeCHniCal informaTion
William Cook Intermodal
Dim Dim A B
WCI500/111 111 57
WCI500/130ER 130 72
WCI500/150ER 150 90
William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 19
William Cook Stanhope_p18_p19.indd 2 17/02/2012 11:58
Mini Box Corner FiTTings - Type WCI 1073, 4620, 4588
Type WCI 1073
Type WCI 4588
Type WCI 4620
William Cook Intermodal
+44 (0)1388 528 248
• Tosuitoff-shoreandminicontainers.
• Tosuitangledorverticalliftslings.
• Robustdesignensureslonglife.
• Designallowsstackingofcontainers.
• Onepiececasting.
These products are made from special William Cook steel designed for low temperature working at -40°C as standard.
©
©
©
20BS EN ISO 9001:2008LRQ 4006347
001
William Cook Stanhope_p20_p21.indd 1 17/02/2012 11:58
Type WCI 1073 • Tosuitsquareboxes.• 32.5mmbosswidth.• Designedforasafeworkingload3250kg.
Weight 4.2kg (9.3lbs)
Type WCI 4620 • Tosuit6’x5’and10’x8’boxes.• 31mmbosswidth.• Designedforasafeworkingload5000kg.
Weight 5.7kg (12.5lbs)
Type WCI 4588 • Tosuit20’x8’boxes.• 38mmbosswidth.• Designedforasafeworkingload8500kg.
Weight 14.8kg (32.6lbs)
TeChniCal inForMaTion
William Cook Intermodal
11513x45°
115
32DIA102
©
102
122
150
25
©
250
115
16228.5
©
William Cook IntermodalStanhopeCoDurhamDL132YREnglandPhone+44(0)1388528248Fax+44(0)1388528879Webwww.william-cook.co.ukemailintermodal@william-cook.co.uk 21
William Cook Stanhope_p20_p21.indd 2 17/02/2012 11:58