+ All Categories
Home > Documents > WIND DIRECTION SENSOR - Navisnavis-anemometers.com/pdf/WDS_100_Wind_direction... · 2 WDS sensor...

WIND DIRECTION SENSOR - Navisnavis-anemometers.com/pdf/WDS_100_Wind_direction... · 2 WDS sensor...

Date post: 07-Aug-2020
Category:
Upload: others
View: 6 times
Download: 0 times
Share this document with a friend
2
NAVIS elektronika E-mail: [email protected] www.navis-anemometers.com WIND DIRECTION SENSOR WDS 100/4-20mA replaceable wind vane UV and shock resistant wind vane magnec, contactless measuring principle with no blank sectors field replaceable bearings WIRING DIMENSIONS OUTPUT 122 122
Transcript
Page 1: WIND DIRECTION SENSOR - Navisnavis-anemometers.com/pdf/WDS_100_Wind_direction... · 2 WDS sensor head with bearings SPARE PARTS 1 2 ORDERING INFORMATION. Title: WDS100_4_20MA_280220.cdr

NAVIS elektronika E-mail: [email protected]

www.navis-anemometers.com

WIND DIRECTION SENSORWDS 100/4-20mA

replaceable wind vane

UV and shock resistant wind vane

magne�c, contactless measuring principle with no blank sectors

field replaceable bearings

WIRING DIMENSIONS OUTPUT

122

122

Page 2: WIND DIRECTION SENSOR - Navisnavis-anemometers.com/pdf/WDS_100_Wind_direction... · 2 WDS sensor head with bearings SPARE PARTS 1 2 ORDERING INFORMATION. Title: WDS100_4_20MA_280220.cdr

NAVIS elektronika E-mail: [email protected]

www.navis-anemometers.com

- vane (replaceable): ............................... UV and shock resistant plastic

with ø20 mm outside diameter

Minimum wind speed: ............................................. 0,3 m/s

Accuracy: ................................................................. +/- 2,5°

Weight: .................................................................... 140 g , without cable

Measurement principle: m.......................................... agnetic, contactlessOperating voltage: ................................................... 9 ... 30 V DCSignal output: .......................................................... 4 ... 20 mA, 2 wire

Loop resistance: ....................................................... max. 600Ω /24V

Temperature operating range: ................................. -30 ... +55 °C

Reverse polarity protection: ................................... YESTransient voltage protection: .................................. YES

Relative humidity: .................................................... 0 ... 100%

Bearings (replaceable): ............................................ 2 x precision stainless steel Ball bearings

TECHNICAL DATA

Output averaging period: 2 s........................................

Cable: ....................................................................... Liyy 2 x 0,34 mm²; m standard10

Wind direction measurement range: ...................... 0 ... 359°, no blank sectors

Material - housing: ................................................. Anodized aluminum

Resolution: ............................................................... 1°

Mounting: ................................................................ the sensor mounts on a pipe

Subject to technical modifica�on without no�ce

- WDS100/4-20mA - various cable length

MODELS OPTIONS

1 Spare wind vane2 WDS sensor head with bearings

SPARE PARTS

1 2

ORDERING INFORMATION


Recommended