http://www.fischer.de/en/ - 21/05/2014
Window frame screw FFS
Fram
e f
ixin
gs
/ S
tan
d-o
ff in
stal
lati
on
1
The economical special screw for window installation
BUILDING MATERIALS
Concrete▪Vertically perforated brick▪Hollow block made from lightweightconcrete
▪
Perforated sand-lime brick▪Solid sand-lime brick▪Aerated concrete▪Solid block made from lightweightconcrete
▪
Solid brick▪
ADVANTAGES
No additional plugs are required forscrew installation, thus allowingwork to progress quickly andeconomically.
▪
The small drill bit diameter of 6 mmallows for efficient work, including inthe case of series installation.
▪
The continuous thread prevents thewindow frame from being pulledagainst the substrate, and ensures astress-free and long-lasting fixing ofthe frame.
▪
The optimised special threadreduces the amount of forcerequired for screwing in the screws,meaning that the installation processcan be completed without the use oftoo much force.
▪
APPLICATIONS
Window frames▪Door frames▪Squared timbers▪
FUNCTIONING
Note the drill hole and screw-indepths for the different buildingmaterials listed in the table.
▪
In order to avoid the screw twistingduring installation in concrete, themaximum anchorage depthsstipulated must be adhered to.
▪
Cylinder-head screws arerecommended for recessedinstallation in wooden profiles.
▪
Flat-head screws are recommendedfor installation in plastic andaluminium profiles.
▪
http://www.fischer.de/en/ - 21/05/2014
Window frame screw FFS
Fram
e f
ixin
gs
/ S
tan
d-o
ff in
stal
lati
on
2
TECHNICAL DATA
Window frame screw FFS
Drill hole diameter Screw length Headdo ls
Article name Art.-No. [mm] [mm] [Ø mm]FFS 7,5 x 42 062379 6 42 11,5FFS 7,5 x 52 062395 6 52 11,5FFS 7,5 x 62 062396 6 62 11,5FFS 7,5 x 72 061550 6 72 11,5FFS 7,5 x 82 068955 6 82 11,5FFS 7,5 x 92 061551 6 92 11,5FFS 7,5 x 102 068956 6 102 11,5FFS 7,5 x 112 061552 6 112 11,5FFS 7,5 x 122 068957 6 122 11,5FFS 7,5 x 132 061553 6 132 11,5FFS 7,5 x 152 061554 6 152 11,5FFS 7,5 x 182 061555 6 182 11,5FFS 7,5 x 202 068958 6 202 11,5FFS 7,5 x 212 061556 6 212 11,5
250
TECHNICAL DATA
Frame fi xing screw FFS - with fl at head
Drill hole diameter Screw length Drive Head Sales unit
do ls Item Art.-No. [mm] [mm] [Ø mm] [pcs]
FFS 7,5 x 102 068956 6 102 T30 11,5 100FFS 7,5 x 112 061552 6 112 T30 11,5 100FFS 7,5 x 122 068957 6 122 T30 11,5 100FFS 7,5 x 132 061553 6 132 T30 11,5 100FFS 7,5 x 152 061554 6 152 T30 11,5 100FFS 7,5 x 182 061555 6 182 T30 11,5 100FFS 7,5 x 202 068958 6 202 T30 11,5 100FFS 7,5 x 212 061556 6 212 T30 11,5 100
ACCESSORIES
Cover cap FFS A
Cap Cap height Fits Sales unit
Item Art.-No. [Ø mm] [mm] [pcs]
FFS A-BR dark brown 061561 15 4 FFS-countersunk head 100FFS A-W white 061560 15 4 FFS-countersunk head 100
Frame fi xing screw FFSZ and FFSHighest recommended loads1) for a single anchor for multiple use for non-structural applications in concrete C20/25.
1) Required safety factors are considered.
LOADS
Cracked or Non-cracked concreteType Eff ective
anchorage depthRecommended
tensile loadRecommended
shear loadMin. spacing Min. edge distance
hef Nrec Vrec smin cmin
[mm] [kN] [kN] [mm] [mm]
FFS 7,5 20 0,9 0,4 60 30FFSZ 7,5 20 0,9 0,4 60 30FFS 7,5 40 1,9 0,6 120 30FFSZ 7,5 40 1,9 0,6 120 30
Fram
e fi
xin
gs
/ S
tan
d-o
ff in
stal
lati
on
Window frame screws FFSZ and FFS
http://www.fischer.de/en/ - 21/05/2014
Window frame screw FFS
Fram
e f
ixin
gs
/ S
tan
d-o
ff in
stal
lati
on
3