Date post: | 21-Dec-2015 |
Category: |
Documents |
View: | 219 times |
Download: | 2 times |
Winter wk 3 – Thus.20.Jan.05
• Ch.24: Voltage and electric field
• Ch.26: Current and resistance
• Solar applications
• Ch.27: Circuits
Energy Systems, EJZ
Equipotential surfaces and E fields
Equipotential = constant voltage
Conductors are equipotentials, in electrostatics
Potential difference Electric field
dV/dx = -E or, equivalently,
Practice: Ch.24 Q5,8 (p.646), P#3, 4, 6, 35
V E dr ����������������������������
Ch.24 #4
Ch.24 #6
Ch.24 #35
Electrostatics (d/dt=0): charges fields forces, energy
• Charges make E fields and forces
• charges make scalar potential differences dV
• E can be found from V• Electric forces move
charges• Electric fields store
energy (capacitance)
E.dA = q/0=, E = F/q
ldEdr
rV
')'(
4
1)(
VE
F = q E = m a
W = qV, C = q/V
Ch.26: Currents and Resistance
Current = rate of flow of charge I = dq/dt
Units: amps = coulombs/secCurrent density: J = current/area = n e vCh.26 Q1, 2, P.1, 8
Water flow:Electricity flow:pressure voltage V
volume/time current I
Resistance
Resistance = resistivity * area/length
R = A/L
Which conductor has the greatest resistivity?
Ch.26: Q3
Ohm’s law
In many substances, for a given resistance R, the stronger the driving voltage, the greater the current that flows:
Voltage = current * resistance
V = I * R
Ch.26 Q5, P.17
Power in electric circuits
Power = rate of energy xfr = voltage*currentP = V I
units: Watts = volts * ampsRecall that work = qV. Units: J = CVSolve for V(J,C) = Then [volts]*[amps] = ____*C/s = ______
If V=IR, find P(I,R) = P(R,V) = Ch.26 #35, 64
Ch.27: Circuits:
Battery pumps electricity current flows
http://hyperphysics.phy-astr.gsu.edu/hbase/electric/watcir.html#c1
Voltage = emf
Voltage = potential difference
Electromotive force = V = dW/dq =work done per unit charge
d/dx = -E = electric field
Emf and electric field E
d/dx = -E = electric field
Using the fundamental theorem of calculus, we can derive another of Maxwell’s eqns:
d dx
d
dx
E
dx E dx
E dx
Ch.27: Practice with simple circuits
Q2
#5, 14
Solar applications
Storms from the Sun:p.13: If a CME travels at 1 million miles per hour, how
long does it take to reach Earth?
p.16: The 2 May 1994 event dumped 4600 GW-hr of electricity into Earth’s upper atmosphere. How much energy is that in Joules?
p.16: If the Earth’s mean magnetic field is B0=0.5 Gauss, and one Tesla=104 Gauss, by what percent does 2000 nanoTesla change Earth’s field?
p.54: For the CME of 1 Sept 1859: calculate its speed v, if it took 18 hours to reach Earth.
more Solar applications
Storms from the Sun:p.77: If Rsun = 100 REarth, then find the ratio of their
volumes, Vsun/VEarth
p.77: If m=5 millions tons of mass is converted to energy (E=mc2) each second, calculate the power (P) produced by the Sun.
p.82: If the Sun’s mass is M=2x1030 kg, and it keeps losing dm/dt = 5 million tons per second, how long (T) can the Sun last?
p.83: If the solar wind pours I=1 million amps into Earths magnetosphere, how much charge (Q) is that per day?
Extra solar applications
p.13: Calculate vthermal from Tsolar wind. Compare to vflow.
p.16: Derive the altitude for a geosynchronous orbit
p.77: If the Sun’s core temperature is about T=107K, calculate the thermal speed vth of protons in the core.