+ All Categories
Home > Documents > Wintershall, Maria · Project management and engineering work is undertaken from Subsea 7’s...

Wintershall, Maria · Project management and engineering work is undertaken from Subsea 7’s...

Date post: 14-May-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
2
seabed-to-surface Wintershall, Maria Maria pipelines and subsea construction will be developed using a subsea facility tied via rigid pipelines and flexible risers to Kristin with gas lift being supplied from Åsgard B via Tyrihans and Sulphate reduced sea water supplied with injection pressure from Heidrun. Subsea 7 scope consists of Engineering, Procurement, Construction and Installation (EPCI) of 95km of rigid flowlines, direct electrical heating system, design and fabrication of structures, spools and GRP covers. Transport and installation of subsea production systems.
Transcript
Page 1: Wintershall, Maria · Project management and engineering work is undertaken from Subsea 7’s office in Stavanger, Norway EPCI scope: • 26km 14” Production pipeline system including

seabed-to-surface

Wintershall, Maria

Maria pipelines and subsea construction will be developed using a subsea facility tied via rigid pipelines and flexible risers to Kristin with gas lift being supplied from Åsgard B via Tyrihans and Sulphate reduced sea water supplied with injection pressure from Heidrun.

Subsea 7 scope consists of Engineering, Procurement, Construction and Installation (EPCI) of 95km of rigid flowlines, direct electrical heating system, design and fabrication of structures, spools and GRP covers. Transport and installation of subsea production systems.

Page 2: Wintershall, Maria · Project management and engineering work is undertaken from Subsea 7’s office in Stavanger, Norway EPCI scope: • 26km 14” Production pipeline system including

Wintershall, Maria ProjectMaria

ClientWintershall

LocationNorth Sea

Water depth300 - 320m

Project TypeSURF

Date AwardedMay 2015

Date CompletedDecember 2017

Vessels Utilised/ SpoolbasesSeven Oceans,Seven Viking, Normand Oceanic, Skandi Acergy, Vigra and Leith Spoolbases

OverviewProject management and engineering work is undertaken from Subsea 7’s office in Stavanger, Norway

EPCI scope:

• 26km 14” Production pipeline system including Direct Electrical Heating (DEH) and Bubi mechanically lined pipe

• 19.3 + 3.2km 6 5/8” Gas lift pipeline system including PLEM structure at Tyrihans

• 43 + 3km 12” Water injection PE lined pipeline • Tie-ins, pre-commissioning, Trenching and Rockdumping of

flowlines and umbilicals are also included.

Transport and Installation Scope:

• 2 Off Templates and Manifolds• 23 + 3km Static Umbilical system• Offshore operations will be in 2016 and 2017

Normand Oceanic

Vigra spoolbase

Seven Viking

Seven Oceans

www.subsea7.com© Subsea 7, 2016

Information correct at time of going to press

Mar

ch 2

016


Recommended