Date post: | 25-Feb-2018 |
Category: |
Documents |
Upload: | yraidis-pertuz-roble |
View: | 218 times |
Download: | 0 times |
7/25/2019 Wireless HT Acquistion.pdf
http://slidepdf.com/reader/full/wireless-ht-acquistionpdf 1/1
Click on “ Pick a Sensor ” bu on
Report can be
printed or
emailed
Click on “ Report ” bu on
Sensors are automa cally
selected. Select one if
mul ple are connected.
Click on “ Pick Well ” bu on and
select the well by double -clicking
on the name Click on “ Dynamometer ” bu on
Select stroke to be analyzed and
include in report
A er two complete strokes the surface and pump
dynamometer cards are displayed in real me.
End Acquisi on by pressing the “ Acquisi on ”
bu on on the sensor.
Place the 30k HT on the carrier bar below the permanent
clamp and any other equipment, such as rod rotator.
When unit is running the click the “Start
New Test” bu on. OR Press the Acquire
Bu on at the 30K Wireless Sensor
QAD 5000 -4
Click the “ Zero Ofset ” tab,
then click “ Get New Ofset ”