Date post: | 18-Dec-2014 |
Category: |
Devices & Hardware |
Upload: | daniel-chen |
View: | 45 times |
Download: | 1 times |
Wireless Wall Switch User Manual
1
Copyright notation ©2012 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.
Wulian, is the trademark and registered trade mark of Nanjing IOT Sensor Technology Co., Ltd. The other products mentioned in this article or company names may be the trademark or trade name of their respective owners. Before installing and using the products, please read user manual carefully, which will help you use the products for better. The pictures in the manual are just for your information. If some pictures have differences with material object, the material object is final. The content in the manual is protected by copyright law legislator. It strictly prohibits any forms of copying, passing, distributing and storing any content of the manual without prior, written, consent of the instructor of Nanjing IOT Sensor Technology Co., Ltd. When using, if the practical situation of the product is different with that in the manual, or if you want to get more information, or you have any questions or ideas, please contact us as below: Service telephone: +86-25-5226 9091 Service website: http://www.wulian.cc/english/
Wireless Wall Switch User Manual
2
Ⅰ. Product Introduction
WL-SFB-B01 Wireless Wall Switch is a new product based on ZigBee protocol design. User can control the switch remotely and wirelessly via any mobile intelligent terminal. There is no need to touch the switch and it is very convenient to use.
The product has a wide application, in addition to common smart home system, it can be also applied to intelligent building, intelligent hospital, wisdom hotel, wisdom breeding etc.
Wireless Wall Switch User Manual
3
Ⅱ. Features Support ZigBee HA protocol ZigBee device type: Relay Comply with human engineering design Simple and flexible operation Easy installation Multiple color available to match up with diverse home style
Ⅲ. Diagram illustration
LED indicator light
Decorative cap
UP key
DOWN key
Base Wiring access
Wireless Wall Switch User Manual
4
Ⅳ. Installation Steps 1. Connect the wire in wall cassette with the product.
Friendly remind: Please confirm that power is off before installation. Non-professionals shouldn’t operate without authorization as electrical work is dangerous.
2. Fix the base of the product in wall cassette by two screws. Installation is the same as ordinary wall switches.
Wireless Wall Switch User Manual
5
3. Fold the decorative cap, installation complete.
Ⅴ. Application Method
1. Network Connection Setup (1) Product can be used like ordinary switch, it can also match up with Wireless Gateway.
Wireless Wall Switch User Manual
6
(2) Quick click【UP key】four times(Interval time of each click should be within 1 second) to join ZigBee network.
(3) Quick click【UP key】3 times(Interval time of each click should be within 1 second), it sends out binding request.
After joining ZigBee network, green LED light is constant on.
Binding success, red LED light flickers twice.
Binding failure, red LED light flickers 4 times.
Wireless Wall Switch User Manual
7
(4) Long pressing【UP key】10 seconds to restore to the factory settings.
(Restore to the factory settings as defaults of non joining ZigBee network)
Green LED light goes out
Wireless Wall Switch User Manual
8
2. Software download (1)Please select corresponding operating software according to various mobile intelligent terminal.
a). Android users can search “wulian” or “smart home” in “Google Play Store”, select “smart home” software and download it. b). iPad, iPhone users can search “wulian” or “smart home” in “APP Store”, select “smart home” software and download it. c). Users can also download the software from our official website: http://www.wulian.cc/english/
(2) Please carry on installation and operation according to the software prompting of each version. (3) Enter the learning and using stage when installation is completed. (4) According to the users’ needs, product also supports computer operation( customized user).
3. How to use (1) Users can control the switch easily via mobile intelligent terminal. Please refer to the application method of each version for specific operations. (2) Click【UP key】is on, click【DOWN key】is off.
Wireless Wall Switch User Manual
9
Ⅵ. Notes
About installation When using product for the first time, please read user manual of the product carefully before installation.
About cleaning The product should be placed at a dry and clean place to avoid components inside getting wet or other sundries. Please use a fine cloth to wipe the dust on the surface. Don’t use corrosive cleaning fluid or other chemical solvent.
About storage The box of the packaged products should be placed at a ventilated, dry place and the place without corrosive gases. Stack layer shouldn’t exceed ten layers, warehouse temperature should be within -10℃~+40℃, humidity ≤75%.
About transportation The box of the packaged product can be transported by any vehicle if it is avoided the direct influence of the rain, snow or sudden force etc.
Wireless Wall Switch User Manual
10
About after sale service If product breaks down, non-professionals shouldn’t take it apart, it should be sent to local maintenance station to maintain or you can directly contact with our customer service department(Service Hotline:+86-25-5226 9091).
Ⅶ. Product Specification
Weight 250g
Net weight 150g
Color Multiple color available
Ⅷ. Products in Package
Component Qty
Main body of Wireless Wall Switch 1
Decorative cap 1
User manual 1
Screw 2
Wireless Wall Switch User Manual
11
Ⅸ. Ordering Information
Art. No WLPN1107016
Model WL-SFB-B01
Package Size 138×118×70mm
Power Supply 110V-230V
Load type Resistive load 1200W