Date post: | 10-Apr-2015 |
Category: |
Documents |
Upload: | reinhard-werner |
View: | 1,167 times |
Download: | 6 times |
Besselink & Jones Ltd 3.1
United Kingdom Fittings
Candle ClipCandle shades and small coolie shades up to 7" diameterwill normally have clip fittings, and clip onto:
small bayonet candle bulb (SBC), which fits into:
candle tube, which fits over:
small bayonet lampholder (SBC)SBC candlebulbs. Max 40W
BC GimbelLampshades with fixed gimbels, normally sizesfrom 8" to 16" diameter, screw onto:
bayonet cap lampholder, switched (EPB) or unswitched (BC)
Shades 8"-10" use 60W golf ball
Shades 11" and above use generalservice bulb. Max 60W
27mm inside dia.
Besselink & Jones Ltd3.2
United Kingdom Fittings
DuplexLampshades with duplex fittings, normally sizes 17"base diameter and over, fit onto:
shade carrier, which screws onto:
bayonet cap lampholder, switched (EPB) or unswitched (BC)
Use general servicebulbs. Max 100W
FinnialLampshades with finnial fittings (not commonly used in Britain)can be used with 2 way lamp fittings and finnial. They fit onto:
2 way fittings.
Use general service bulbsUp to 2x 60W
Besselink & Jones Ltd 3.3
United Kingdom Fittings
Duplex (shown with 3 way lampholder and reflector fitting)
Larger Lampshades with reflector fittings are usedwith 3 way fittings and fit onto:
white metal reflector fittings, which screw onto:
3 way fitting. Lampholders can be switched or unswitched
Use general service bulbs.Up to 3x 60W
PendantLampshades with pendant fittings go onto:
bayonet cap lampholders, sometimes switched, but normallyunswitched and used in conjunction with:
a footswitch.Use general service bulbsMax 60W
Besselink & Jones Ltd3.4
United Kingdom Bulbs & Lampholders
As used in UK, Australasia, Indian Sub-Continent and parts of the Middle East.
fig 2.2Candle Bulb
Bayonet Cap (BC)25W - 40W - 60W
fig 2.3Golf Ball Bulb
Bayonet Cap (BC)25W - 40W - 60W
fig 2.5Pygmy Bulb
Small Bayonet Cap (SBC)15W - 25W
fig 2.18Low Voltage 50mm
(Dichroic) 12V ClosedFront Halogen Bulb
20W - 35W - 50W
fig 2.16Capsule Low VoltageHalogen 12V - 2pin
Type ref. M91 - 10W - G4 capType ref. M47 - 20W - G4 cap
fig 2.6Golf Ball Bulb
Small Bayonet Cap (SBC)25W - 40W - 60W
fig 2.17Mains Voltage TungstenHalogen Linear Lamp
TH 100/K4 - 100W - 78mm - R7S capTH 150/K4 - 150W - 78mm - R7S cap
fig 1.2Lampholder withshade ring (BC)
fig 1.3Small Bayonet CapLampholder withshade ring (SBC)
fig 1.4Small Bayonet Cap
Lampholder withoutshade ring (SBC)
fig 1.1EPB Switched Lampholder
with shade ring (BC)
fig 2.4Candle Bulb
Small Bayonet Cap (SBC)25W - 40W - 60W
fig 2.1General Service BulbBayonet Cap. (BC)
25W - 40W - 60W - 100W
Besselink & Jones Ltd 3.5
United KingdomPlugs, Switches & Accessories
fig 3.113 Amp Square Pin Plug
(for lamps, use a 3 amp fuse)
fig 7.14
fig 5.1 fig5.2In-line, Cord or
“Torpedo” switches.Gold or Black
fig 3.25 Amp Lighting
Circuit Plug
fig 5.3Foot Operated Switch
fig 7.3Brass Chain and
ceiling rose
fig 7.11ES to BCconverter
fig 7.1Coverplate with Grommet Hole.For use with Library Lights.
Available in any size
fig 7.8Transformer for Tungsten
Halogen Fittings. 240V/12V105 Watt Max
fig 7.2Brass Conduit
fig 7.12BC to ESconverter
fig 4.1Gold PVC 3 Core Flex
fig 4.2Black PVC 3 Core Flex
fig 4.3White PVC 3 Core Flex
fig 4.4Cloth Covered 3 Core Flex
fig 3.32 Amp Lighting
Circuit Plug
Besselink & Jones Ltd3.6
United States Fittings
Candelabra ClipCandelabra shades and other shades up to 9" diameterclip onto:
candelabra bulb with small edison screw (E12) whichfits into:
candle tube, which fits over:
small US Edison screw skeleton lampholder (E12)
Use SES E12candelabra bulbMax 40W
Large Clip
Lampshades with 10" or 11" base diameter, with largeEdison clips, clip onto:
large Edison screw general service bulb (ES E26)which screws into:
large Edison screw, 3-way USA lampholder
Use E26general servicebulbs. Max 60W
Besselink & Jones Ltd 3.7
United States Fittings
FinnialLampshades with finnial fittings, from 10" diameter andover, fit onto:
harp finnial, fit onto:
harp saddle, with 3-way USA (ES, E26) lampholder
10" & 12" shades useMax 60W general service bulbsLarger shades - max 100W
PendantSmaller lampshades with pendant fittings, up to 8"diameter, screw onto:
small US (SES E12) Edison screw lampholders withshade rings. Not switched
Use SES E12 golf ball bulbMax 40W
Pendant (Larger shades)
Larger lampshades with pendant fittings, go onto
large Edison lampholders (ES E26) with shade rings.Not switched
Use ES E26 generalservice bulbsMax 60W
Besselink & Jones Ltd3.8
United States Bulbs & Lampholders
Americas, Japan and parts of the Middle East
fig 2.8Golf Ball Bulb
Edison Screw (ES E26)
fig 2.7General Service Bulb
Edison Screw (ES E26)
fig 1.5US Harp Saddle
ES E26 Lampholderwith 3-way switch
fig 2.14Pygmy Bulb
Small US EdisonScrews (SES E12)
Low Voltage 50mm(Dichroic) 12V Closed
Front Halogen Bulb20W - 35W - 50W
fig 2.16Capsule Low Voltage
Halogen 12V-2pinType ref. M91 - 10W - G4 capType ref. M47 - 20W - G4 cap
fig 2.10Golf Ball Bulb
Small US EdisonScrews (SES E12)
fig 2.17Mains Voltage TungstenHalogen Linear Lamp
TH 100/K4 - 100W - 78mm - R7S capTH 150/K4 - 150W - 78mm - R7S cap
fig 1.10ES E26 Lampholderunswitched without
shade rings
fig 1.6US, SES E12
Lampholder withshade rings
fig 1.7US, SES E12
Skeleton fitting.(Use with candle tube)
fig 1.9ES E26 Lampholder
unswitched withshade rings
fig 1.14US, ES E26
Lampholder withDimmer Switch
fig 1.15US, ES E26
Lampholder with3-way switch
fig 2.9Candle Bulb
Small Edison Screw(SES E12)
26mmdia.
12mmdia.
fig 2.18
fig 1.8US, SES E12
Lampholder withoutshade rings
Besselink & Jones Ltd 3.9
United StatesPlugs, Switches & Accessories
fig 4.5US 2 Core Clear Flex(standard with fig 3.6)
fig 3.6US Clear Flat 2 Pin Plug
fig 3.7US Black Flat 2 Pin Plug
fig 3.5US White Flat
2 Pin Plug
fig 3.83 Pin US Plug
fig 4.6US 2 Core Black Flex(standard with fig 3.7)
fig 4.4Cloth Covered Flex
US 2 Core (for use with fig 3.5)
fig 5.1 fig5.2In-line, Cord or
“Torpedo” switches.Gold or Black
fig 5.3Foot Operated Switch
fig 7.3Brass Chain and
ceiling rose
fig 7.11ES to BCconverter
fig 7.1Coverplate with Grommet Hole.For use with Library Lights.
Available in any size
fig 7.9Transformer for Tungsten
Halogen Fittings. 110V/12V105 Watt Max
fig 7.2Brass Conduit
fig 7.12BC to ESconverter
Besselink & Jones Ltd3.10
European Fittings
Candle Clip
Candle shades and small coolie shades up to 7" dia willnormally have clip fittings and clip onto:
small Edison screw candle bulb (E14), which fits into:
a candle tube, which fits over:
Small Edison screw skeleton lampholder (E14)
Use SES E14 candlebulb Max 40W
GimbelLampshades from 7" diameter up to 10" base diameterhave standard UK gimbels, which scew onto:
small Edison screw lampholders (SES E14) with shade rings,not switched.
Shades 7" dia. use golf ball bulb. Max 40WShades 8" - 10" dia. Use SES E14 golfball bulb. Max 60W
Large GimbelLampshades from 11" to 16" base diameter havelarge (ES E27) gimbels and screw into:
large Edison screw (ES, E27) lampholders with shade rings,not switched
Use ES E27 general service bulbs. Max 60Wfor shades up to 12" and Max 100Wfor shades 14" and above.
Besselink & Jones Ltd 3.11
European Fittings
DuplexLampshades with duplex fittings, from 17" diameter baseand over, fit onto:
shade carrier (ES E27), which screws onto:
large Edison screw lampholder (ES, E27) with shade rings.Not switched
Use ES E27 generalservice bulbs. Max 100W
PendantSmaller lampshades with pendant fittings, up to8" diameter base, go onto:
small Edison screw lampholders (SES E14) with shade rings,not switched
Use SES E14 golf ball bulbMax 40W
Large Pendant
Larger lampshades with pendant fittings, go onto
large Edison lampholders (ES E27) with shade rings.Not switched
Use ES E27 general service bulbsMax 60W
Besselink & Jones Ltd3.12
European Bulbs & Lampholders
Europe, Russia, Asia & Africa
fig 2.8Golf Ball Bulb
Edison Screw (ES E27)
fig 2.13Pygmy Bulb
Small US EdisonScrews (SES E14)
Low Voltage 50mm(Dichroic) 12V Closed
Front Halogen Bulb20W - 35W - 50W
fig 2.16Capsule Low VoltageHalogen 12V - 2pin
Type ref. M91 - 10W - G4 capType ref. M47 - 20W - G4 cap
fig 2.12Golf Ball
Small EdisonScrews (SES E14)
fig 2.17Mains Voltage TungstenHalogen Linear Lamp
TH 100/K4 - 100W - 78mm - R7S capTH 150/K4 - 150W - 78mm - R7S cap
fig 1.10ES E27 Lampholderunswitched without
shade rings
fig 1.11SES E14
Lampholder withshade rings
fig 1.12SES E14
Skeleton fitting.(Use with candle tube)
fig 1.9ES E27 Lampholder
unswitched withshade rings
fig 2.11Candle Bulb
Small Edison Screw(SES E14)
27mmdia.
14mmdia.
fig 2.18
fig 1.6SES E14
Lampholder withoutshade rings
Besselink & Jones Ltd 3.13
EuropeanPlugs, Switches & Accessories
fig 5.1 fig5.2In-line, Cord or
“Torpedo” switches.Gold or Black
fig 5.3Foot Operated Switch
fig 7.3Brass Chain and
ceiling rose
fig 7.11ES to BCconverter
fig 3.4European Round2 Pin Plug + Earth
Please specify if you require adifferent plug
fig 7.1Coverplate with Grommet Hole.For use with Library Lights.
Available in any size
fig 7.8Transformer for Tungsten
Halogen Fittings. 220V/12V105 Watt Max
fig 7.2Brass Conduit
fig 7.12BC to ESconverter
Gold PVC 3 Core Flex
Black PVC 3 Core Flex
White PVC 3 Core Flex
Cloth Covered 3 Core Flex
fig 4.1
fig 4.2
fig 4.3
fig 4.4