RPC33Safety Reflective Photo Eye
with Hood Kit
Congratulations on purchasing the RPC33 Safety Reflective Photo Eye with Hood Kit from
DF Supply, Inc.
Follow these instructions to properly set up your Safety Reflective Photo Eye Kit with various
different types of automatic gate and door openers or operators.
DF Supply, Inc.Email: [email protected]
Web: www.dfsupplyinc.com
Questions?Email [email protected]
BROWN
BLUE
GRAY
WHITE
BLACK
POWER
POWER
NORMALLY OPEN
COMMON
}
Wiring the Photo Eye to your Gate Opener
Common Wiring Ports
Brown Black Gray White
Apollo 635/636/835/836 Not Used 14 GND
Apollo 1050i V+ Not Used 28 29
BFT Libra UL
12V Not Used Safety GND
BFT Rigel 5
11 18 Not Used 15
FAAC E024U
20 3.5 Not Used 33
FAAC 455D
8 4 Not Used 6
Battery +
12 Not Used 16
Linear Apex DC+ C-OBS COM
Blue
GTO Blue Board
*Must splice from battery*
Apollo 936i
17
Not Used
Not Used
Safety COM
GND
GND
GND
12
7
16
COM
DC-
21
NORMALLY CLOSED
12-30V DC/AC 60 Hz
Features and Specifications
• Sensing range adjustable potentiometer (optional)• PC casing, anti fog / dew / rains• IP-55 Water Proof• Square/ Round Shape reflector selectable• Wrap around mounting bracket• Input Volt.: 12-30V DC/AC 60 Hz• 2 LED indicators for power and beam alignment• Hood for round / square shape reflector (optional)
Detection Method
Sensing Range
Supply Volt
Response Time
Sensing Range (adjustable)
Emitting Element
LED Indicator(Left Side)
Power LED Indicator (Right
Side)
Dimensions
Current Consumption
Output Method
Switching Capacity
Connection Method
Housing Method
Operating Temp.
Water Proof
Cable Wires
Retro-Reflection
10 meters
12-30V DC/AC 60 Hz
10 msec.
10m
IR LED
Beam Aligned N.C.: ON N.O.: OFF
Beam Broken N.C.: OFF N.C.: ON
When Powered: LED ON
Power Off: LED OFF
20mm(w) x 63mm(h) x 39mm(d)
100mA
SPDT Relay output
30VDC/AC, 2A
Cable wires: Brown / Blue / White / Black / Gray
Case: PC ; Lens: PC
-4°F to 131°F (-20°C to 55°C)
IP-55
2517 / 24AWG / 5 cores
12V
USAutomatic†† J2 Pin 12 J2 Pin 8 Not Used J2 Pin 7 J2 Pin 2
†† When installing USAutomatic, 12V battery must be connected to properly align photo eye beam. Disclaimer: Please note this is only a suggestion for typical applications. Your gate opener control board may vary due to manufacturer revisions. Please consult your gate opener manual for detailed instructions.