1
PRODUCT DATA SHEET Wind turbine climber kit Comprehensive off-the-shelf Safety Kit for Wind Turbine Climbers. The WTG Climbers Safety kit is a complete off-the-shelf kit designed specifically for technicians who are required to work within wind turbine generators. The kit incorporates the multi-featured Cirrus full body harness with removable work positioning belt. The rear attachment point is designed and positioned at nape of neck to eliminate discomfort when climbing WTG interior ladders. This ensures more vertical orientation of casualty when being lowered during rescue and minimises interference with ladder rungs. The Front attachment point is suitable for fall arrest and vertical systems. The Duon climbers helmet chin strap anchorage complies with EN12942 release requirements. This complete kit contains everything needed to climb and work in the wind industry (except for the vertical fall arrest traveller which is specific to each WTG). Kit includes: • Cirrus WTG Full Body Harness • Work Positioning Belt (removable) • DUON Climbers Helmet (EN12492) • ELITE Twin Lanyards • Piranha Rope Adjuster • Sling, Nylon, Protected, 60cm • Head Torch • Kit bag 5L with 7kg WLL Weight (kg): Materials: Size: Conformity: Various EN Approvals WK13 EN Test Mass: 125kg n/a Loading: Specifications: Industries: 6.00 Renewables (Wind) Various Standard Patented GB2543699 sales support 01539 728866 heightec.com 11/04/18 PDS366 NB: specifications and colour may change without notice.
![wk13 alg 2nd.notebookmrscolelovesmath.weebly.com/.../19_04_10_2nd.pdf · ] *yr-value of the vertex Extrema: maximum at the vertex End Beha vior. As f(x) + —cn As f(x) + —cn Interval](https://static.documents.pub/doc/80x56/607a7c18f11ee745e1268e06/wk13-alg-2ndnote-yr-value-of-the-vertex-extrema-maximum-at-the-vertex-end-beha.jpg)
