PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 1300Large holes – up to 51/8" diameterTapping up to 15/8" diameter
Cutter capacity 5 1/8" dia.
• 1-800-700-5919 • Visit our website at www.csunitec.com
Powerful • Reliable
• 20 Amp double-insulated motor
• 34-1/2" high, 112 lbs.
• 4-speed oilbath gearbox forapplications requiring high power
• Designed for continuous use
• Infinitely variable torque controland full-wave control electronics
Drill up to 5-1/8" dia.Tap up to 1-5/8" dia.
• Uses annular cutters7/16" to 5-1/8" dia., 1" and 2" depth13/16" to 4-3/4" dia. for 4-1/4" depth*
• Twist drilling up to 1-3/4" - usesMT4, countersinking up to 3" dia.
• Tapping up to 1-5/8"
• Reaming up to 2"
• Automatic internal lubrication
* 4" depth cutters or longer require purchase ofZIA 419M adapter and 1-1/4" Weldon adapter.
Made in GermanyPowered by
Integrated Safety
• Green/Red LED magnetic forceindicator for safe operation
• Equipped with Electronic SafetyShutoff Sensor (see p. 3)
• Emergency-off function
24
ø 5-1/8"
Cutter Capacity 4-gear VariableSpeed (RPM)
ø 1-3/4" / ø 3"
Twist Drill /Countersink
SafeMag™
Magnet ForceIndicator
3.35"(12" withoutretainer)
Stroke(length)
Variable-speedControl
Electronics
CoolMag™
OverheatProtection
ø 2" / ø 1-5/8"
Ream / Tap Reversible(CW/CCW)
30-8050-120130-350210-550
Ideal for use with TCT Carbide cutters
up to 51/8" dia. –see pages 38-39.
4 Gearswith Variable
Speed
OptionalSpecial-PurposeCutting Tool
Countersinking
Reaming
Tapping
Twist Drilling
Equipped withElectronic Safety
Shutoff Sensor (see p. 3)
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 5 1/8" dia.
• 1-800-700-5919 • Visit our website at www.csunitec.com
StandardEquipmentalso includesauto lubrication,safety strap,carabin hookand allen keys.
Model MAB 1300
MAB 1300 Specifications
Model MAB 1300 Specifications
Motor Power 20 Amp / 110 Volt
Weight 112 lbs.
Hole Capacity 51/8" dia.**
Twist Drill Capacity 13/4" dia.
Tapping Capacity 15/8" dia.
Speeds 30-80, 50-120130-350, 210-550 RPM
Magnet Base Size 43/4" W x 14" L
Dimensions 341/2" H x 191/2" L x 10" W
Magnetic Force (1" plate) 23,600 lbs.
Arbor Bore 11/4" (3/4" adapter included)
Spindle MT4
Automatic Lubrication Included
* 220 Volt / 50 Hz also available** Maximum hole diameter is with TCT Carbide cutters - see p. 38-39.
�Annular Cutters: pages 32-41 �Accessories: pages 42-50
25
Standard Equipment
1 Magnetic drilling machine
1 Carrying case on wheels
1 Arbor adapter to 3/4" Weldon
1 Safety chain
1 Hexagon socket screw key SW6
1 Drift key MT4
1 Operating manual
1 Warranty certificate
Made in GermanyPowered by
4.72"3.26"
2"
Accessories
10"
27
"
14.17"
22
.05
- 3
4.4
5"
19.5"
See page 26for tappingaccessoriesand wheeledcarrying case.
ZHK 1300wheeled
carrying caseincluded with
MAB 1300
PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 1300 Accessories
• 1-800-700-5919 • Visit our website at www.csunitec.com
Made in GermanyPowered by
26
�Annular Cutters: pages 32-41 �Accessories: pages 42-50
Tap Collets and Reducing Adapters
Thread Order No.1/4 ZGA 1/45/16 ZGA 5/163/8 ZGA 3/87/16 ZGA 7/161/2 ZGA 1/2
Thread Order No.9/16 ZGA 9/165/8 ZGA 5/811/16 ZGA 11/163/4 ZGA 3/4
Order Morse Tap Tap Shank Tap ShankNumber Taper Size Diameter Square70308 3 5/8" .480 .36670301 3 3/4" .590 .44270302 3 7/8" .697 .52370303 3 1" .800 .60070304 3 1-1/8" .896 .672
70403 4 1" .800 .60070404 4 1-1/8" .896 .67270405 4 1-1/4" 1.021 .76670406 4 1-3/8" 1.108 .83170407 4 1-1/2" 1.233 .92570408 4 1-5/8" 1.305 .979
Tap Collets with 3/4" or 1-1/4" Weldon shankall threads shown are ASA Standard (or DIN 376 for metric)
Order No. ZHK 1300
Robust transport case with wheels, carrying handle andsturdy closures. Protect your investment from water anddust with this rugged case. Four large ABS locks and an
interior configuration customized for machine to securedrill and accessories during
transit. Lightweight, heavy-duty plastic constructionand robust ABS wheels.
Drill not included withZHK 1300. Purchase of MAB 1300 drill includes ZHK 1300 case. See page 23 for MAB 825/845 case.
Rolling Transport Case for MAB 1300
• Positive, accurate driving of larger-sized taps• No slippage or tap damage• Tap shank square engages with square drive socket• 3 set screws secure tap in holder
Heavy-duty Tap Holders
Bushing – Reduces1-1/4" Weldon shank to3/4" Weldon shankOrder No. ZAP 200
Reducing SleeveDIN 2185Order No. ZRH 430 for MT 4:3(adapts MT4 to MT3)
Tap Collets and Reducing Adapters
Heavy-duty Tap Holders
Rolling Transport Case for MAB 1300
See page 43for additional
tapping options.
Cutter capacity 5 1/8" dia.
Tapping Accessories for MAB 1300, MAB 825, MAB 845 and CSU 100/3RL
Watertight, shock-proof and robust – the right protection for your machine. Four large ABS locks secure the robust plastic case
Part No. GSW-444 quick-changetapping chuck with MT4 connection(for MAB 1300). Collets not included.GSW-444 and GSS-4xx collet set shown below.
GSS-420 collet for 20mm shanks
GSS-422 collet for 22mm shanks
GSS-427 collet for 27mm shanks
GSS-433 collet for 33mm shanks
GSS-442 collet for 42mm shanks