Woodharbor Cabinetry

Molding Simplification

September 2010

Molding Tips Expanded Availability, Simplified Codes

• All lineal moldings are ordered using a single code per profile (MCROWN – used for 8’ and specified length)

• Specify total lineal footage required

• System calculates # of 8’ lengths (rounds if necessary)

• Specified lengths other than 8’ are designated on “mods/accessory” screen in eHarbor

Enter total LF required …

Enter TOTAL LF required.EXAMPLE: Need 3 – 8’ lengths

Enter 24 here; Uneven amts.Will be calculated & converted

To 8’ lenghts (42 >> 6)

eHarbor assumes 8’ lengths…

Molding is summarized into LF Quantity and 8’ Lengths

Reconfigure to override Select Specified Lengths

Enter Specified Length details:Quantity and Length (inches)

To override 8’ default

Override Total LF

to change Qty

ordered

Item is changed to reflect New lengths with Adjusted pricing