THE ORIGINAL & TRUSTED NAME

IN VACUUM LIFTING EQUIPMENT

MRT411LDC3700 lbs [320 kg]

Rev. 0.4 / 07-18 Spec. Sheet 8-12

Wood's Powr-Grip products are sold through authorized dealers.

800.548.7341WPG.com

Employing state-of-the-art technology, Intelli-Grip® automatically monitors vacuum and power systems to: • Maximize productivity• Help reduce human error• Simplify maintenance and repairs• Protect employees and property from harm

908 West Main - P.O. Box 368Laurel, Montana 59044 U.S.A.

406.628.8231 (phone)406.628.8354 (fax)

WOOD'S POWR-GRIP® MANUAL ROTATOR/TILTER WITH DC3 DUAL VACUUM SYSTEM

MRT411LDC3Maximum Load Capacity 700 lbs [320 kg]

Intelli-Grip® Technology

Automatic self-testing ensures lifter is ready for use, every lift.Color display provides critically relevant information at a glance.Anticipates threats and alerts operator beforehand with clearly visible and audible warnings.Continuously monitors battery and prevents lifter from attaching to loads if energy is hazardously low.Multiple alarm levels plainly identify the severity of hazards.

Load MovementManual rotation, 360° edgewise, with locking at each 1/4 turnManual tilt, 90° between upright and flat, with automatic latching in upright position

Standard Operating Power

12 volts DC, 5 amps

Standard Features

Intelli-Grip® technologyDual vacuum systemHigh-flow vacuum pumpBattery and chargerBattery energy gaugeLow vacuum strobe lightLow vacuum/power loss warning buzzer with back-up batteryGreen lift lightVacuum gaugesVacuum line filtersVacuum reserve tanksSpring-mounted vacuum padsMovable pad mountsPad extension armsBlow-off for quick releaseTwo-action, push-button release

Available Options

Remote control system (59906)Forklift adapter (95722)Adaptable length lift bar (95723)Long extension arms (95725)Individual pad shutoffs (93011)Extensions for movable pad mounts (93101 & 93101AM)Pad frame T-arm assemblies (97466)MRT4 Shipping case (53006)Alternative pad compounds for low-marking, temperature resistant and coated surface applications (special order)

Dual Vacuum SystemFeatures two completely independent vacuum circuits.Provides vacuum system redundancy.Limits possibility of a catastrophic failure.Reduces chance of harm to personnel or equipment.

ISO 9001

Certified Company Since 1

998

Basic Configuration Linear Configuration Extended Configuration

MRT411LDC3Standard Pad Spread

Basic Configuration: Extended Configuration:

Linear Configuration:

28¼" x 32¾" [72 x 83 cm] 48¼" x 67½" [123 x 172 cm] 78¼" x 15¾" [199 x 40 cm]

Number / Size of Pads 4 / 11" [28 cm] dia. lipped

Lifter Weight 125 lbs [57 kg]

Design StandardsASME B30.20 (BTH-1 Design Category "B", Service Class "0") CEAS 4991

(See www.WPG.com for more information.)Based on product information at time of publication. Environmental conditions can affect product performance and longevity;

consult the product instructions on WPG.com or contact a Technical Sales Representative for more information.

Maximum Load Capacity 500 lbs [225 kg](with long arms installed)

Lifter Weight Increase 10 lbs [5 kg]

Model MRT4 lifter equipped with Long Extension Arms.

LONG EXTENSION ARMSDesigned for applications requiring a larger pad spread to reduce overhang on large loads.

Pad Spread Dimensions provided are for MRT411LDC. For MRT49DC, subtract 2-3/4" [7 cm] For MRT4HV11DC, subtract 1-3/4" [5 cm]

MRT OPTIONS

Overhead Clearance Reduction

11-3/4" [298 mm] with Shortened Configurations

Horizontal Reach Increase 7-5/8" [193 mm] with Reversed Bail Configurations

Maximum Load Capacity* Standard Configuration: 700 lbs [320 kg] Reversed Bail Configuration: 600 lbs [270 kg]Shortened Configuration: 650 lbs [295 kg]Shortened, Reversed Bail Configuration: 500 lbs [225 kg]

*Net capacity cannot exceed standard lifter capacity.

Lifter Weight Increase 10 lbs [5 kg]

ADAPTABLE LENGTH LIFT BARDesigned for applications requiring increased horizontal reach at the hook point or applications involving minimal clearance between the lifter and the hoisting equipment, such as installations under eaves or similar handling situations.

• Designed specifically for shipping and storing Powr-Grip®

MRT4 Vacuum Lifters.

• Made from 100% recycled HDPE plastic, features twin sheet, thermo-formed construction, making it very durable, as well as water-resistant.

• Special area to house extension arms for these lifters.

• Internal nylon straps to hold the lifter and extension arms firmly in place, preventing them from rattling around while in transit.

• Exterior rubber straps to hold the case securely closed during shipping.

• Handles molded into the case enable convenient handling.

• Mounting points inside the lid of the case enable the hanging of up to 4 extra vacuum pads.

• Ribbed exterior of case specifically designed for easy stacking of multiple lifters (up to 4).

• Wheels on one end make short distance movement of the lifter manageable by one individual.

• Grooves on the bottom of the case facilitate forklift handling from all four sides.

SHIPPING CASE FOR MRT VACUUM LIFTER(LIFTER AND CASE SOLD SEPARATELY)

FORKLIFT ADAPTER

Compatible Fork Dimensions

1-1/2" to 2-1/4" [38-57 mm] thick and 4" to 6" [102-152 mm] wide

Inside Fork Spread 4" [102 mm]Maximum Load Capacity 700 lbs [320 kg]

when used on MRT411LDC*Maximum Load Thickness 1" [25 mm] at full capacity Lifter Weight Increase 130 lbs [59 kg]

*The forklift must have sufficient capacity for the combined weight of the lifter and its maximum load when the load is located 8-3/4" [222 mm] outward from the fork tips or 50-3/4" [1289 mm] outward from the fork stops, whichever places the load at a greater distance from the forklift’s front wheels.

Designed for applications where a forklift is desired, such as installations under eaves and commercial, indoor applications, where using a crane is not possible. Model MRT4 lifter equipped

with Forklift Adapter.