High quality Dutch paint solutions

WOODSTAIN OIL FINISHES PATINES WAXES VARNISH LIME PAINTS CHALK PAINTS

whoKat & Co is a modern family business with atradition in manufacturing high quality furniturefinishing products for manufactures in TheNetherlands an abroad. The company wasfounded by Gerrit Kat in 1870. When manycustomers decided to relocate their productionto Eastern-Europe and Asia, this increasedthe export of products. Poland, Romania, ThePhilippines, Indonesia and China became thenew main export countries; each with its owncultural and technical challenges

our processKat & Co manufactures custom made furniturecoloring systems. Creativity, personal attention,guidance and service guarantee a product that,qualitatively and design wise, belong to the topof the furniture market and meets all modernrequirements. Kat & Co replies adequately andfast on new requests. Moreover, the researchand development department and the technicalstaff are available for assistance. All water basedproducts are composed according to the latestEuropean guidelines and legislation

whatKat & Co has been exporting to China since the1990s. in January 2015, a partnership agreementwas signed with Mr. Jeff Lee from Ningbo UnitedFortune Co. Ltd. This was the beginning ofexclusive representation of Kat & Co on theChinese market. this partnership agreement isan important step towards the future, a strongsupport for existing customers in china and anexpansion of the activities to China

our clientsKat & Co supplies furniture factories in WesternEurope, Eastern Europe and Asia. Moreover, thecompany supplies furniture importers and semimanufactures that outsource their productionto other countries, but want to give theirproducts a consistent and an appearance of thehighest quality. Kat & Co is proud to say thatmany customers have been loyal for decades

descriptionThe “KATCO” Oil finish is a blend of Pu basedoil, natural waxes and oil of natural sources. Itsdeveloped as an easy to go system for coloringand protection of your furniture or floor in onestep. “KATCO” Oil finish gives a natural lookwith an excellent resistance against water and allkinds of dirt contamination and is available in 12popular colors

oil-finishes

coverage: 25-30m2/liter

density: 0.825-1.000kg/dm3

(depending on the color)

solid content: 35%

coats: 1 coat is sufficient,

further coats will deepen the color

thinner: white spirit

packing: 5 Liter

available: 12 beautiful colors/shades

in storage: 12 months, in tightly sealed packing

general: after use plunge the towels into water,

because of self-ignition

properties

Usage drying times“KATCO” Oil finish can be used on bare or pre-

oiled wood. It’s recommended for use on furniture,

cabinets, doors, floors etc. For indoor use only

Available in matt and semi-gloss composition

touch dry in 2-4 hrs. (20°C)

full dry with best resistance: 7 days

unfinished wood Pre-oiled wood

Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Apply the Oil finish by brush and let it dry forabout 1 minute and then wipe it of with a towel.Always work in the direction of the grain

To deepen the color, apply an extra coat like step 2

Prepare the surface by cleaning thoroughlyand polish the surface with steel wool oooo.Make the surface free of dust

Apply the Oil finish by brush and let it dry forabout 1 minute and then wipe it of with a towel.Always work in the direction of the grain

To deepen the color, apply an extra coat like step 2

2

1

2

1

Clear

Light Weathered

Light Grey

Smoked

½ White

Middle Weathered

Middle Grey

Dark Antique

White

Dark Weathered

Dark Grey

Charcoal

PU-lacquer

descriptionThe “KATCO” PU Lacquer is a high quality, onecomponent, water based PU lacquer with a highbuild and excellent properties against water, allkinds of dirt contamination and scratches.developed for the transparent finishing ofwooden furniture, floors, doors etc. Available inseveral gloss levels, from extra mat - gloss

Brush application Pre-oiled wood

thinner: water

packing: 5, 10 and 30 liter cans

available: extra mat, mat, semi gloss and gloss

in storage: 12 months, in tightly sealed packing -

keep away from freezing

properties

1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Apply the lacquer by brush. always work in thedirection of the grain

Let it dry for about 1-2 hours

Prepare the surface by cleaning thoroughlyand polish the surface with steel wool oooo.Make the surface free of dust

Apply a coat of the “KATCO” PU Lacquer by spraygun (nozzle size: 1.3 - 1.5 mm) (working pressure:2.5 - 3.5 bar).

Usage drying times“KATCO” PU Lacquer is suitable for all kinds

of woods, indoor use only. Its easy to use and

can be applied by brush, or pneumatic spay

equipment

Let it dry for about 1-2 hours

By a room condition of 20°C, humidity Ca 65%:

1-2 hours

3

4

3

4Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)

Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)

base: PU (poly urethane)

coverage: brush: 10-12m2/liter, spray gun: 6-7m2/liter

density: 1.000-1.045kg/dm3

solid content: 34%

viscosity: 30-35” DIN4 at 20°C

coats: for the best properties, always apply 2 coats

22

The “KATCO” Specialwax is produced to an oldDutch recipe, with a perfect blend of Naturalwaxes and turpentine. Its developed for therestoration of antique furniture but also oftenused for all kinds of (new made) woodenfurniture, floors etc. “KATCO” Specialwax naturallyenhances the beauty and patina of your wood.

specialwax

unfinished wood finished wood

coverage: 15-20m2/liter

density: 0.800-0.900kg/dm3

(depending on the color)

coats: 1 coat is sufficient,

further coats will deepen the color

thinner: white spirit

packing: 375ml, 5 Liter

available: 6 beautiful colors/shades

in storage: 12 months, in tightly sealed packing

properties

1 1 Prepare the surface by sanding (grain 180) andremove the dust. Please be sure that the surface isclean.

Apply the wax by brush or towel If necessary wipeoff the excess of wax by a clean towel.

Let it dry for about 15-30 minutes.

Prepare the surface by cleaning thoroughlyand polish the surface with steel wool oooo.Make the surface free of dust

Apply the wax by brush or towel If necessary wipeoff the excess of wax by a clean towel.

Let it dry for about 15-30 minutes.

Usage drying times“KATCO” Specialwax can be used on bare or sealed

wood. It’s recommended for use on Arts and Crafts

furniture, cabinets, doors, floors etc. For a beautiful

sheen, you have to polish the wax. For an unfinished

look, apply the wax without polishing.

15-30 minutes (20°C)

For a beautiful sheen, you have to polish the wax.For an unfinished look you have to apply the waxwithout polishing.

You can apply 1 coat, further coats will deepen thecolor and enhance the sheen levelAlways work in the direction of the grain.

3 3

For a beautiful sheen, you have to polish the wax.For an unfinished look you have to apply the waxwithout polishing.

You can apply 1 coat, further coats will deepen thecolor and enhance the sheen levelAlways work in the direction of the grain.

22

description

Clear

Jacobean

Forest

Lime

Stripped

Grey

descriptionThe “KATCO” WB sanding sealer is a speciallydeveloped, high quality, one component,universal sanding sealer with an excellentbuild- and sanding properties.

WB-sanding sealer

Brush application Pneumatic spray application

thinner: water

packing: 5, 10 and 30 liter cans

in storage: 12 months, in tightly sealed packing -

keep away from freezing

properties

1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Apply the WB sanding sealer by brush. alwayswork in the direction of the grain

Let it dry for about 2-3 hours

Apply a coat of the WB sanding sealer by spraygun (nozzle size: 1.3 - 1.5 mm) (working pressure:2.5 - 3.5 bar).

Usage drying timesThe “KATCO” WB sanding sealer is suitable for all

kinds of woods, indoor use only. Its easy to use and

can be applied by brush or pneumatic spray

equipment. The WB sanding sealer has tot be finished

with the (water based) PU or Acrylic Lacquer.

By a room condition of 20°C, humidity ca 65%:

2-3 hours

Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Let it dry for about 2-3 hours

22

3

4

3

4Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)

base: acrylic

coverage: brush: 10-12m2/liter, spray gun: 6-7m2/liter

density: 1.000-1.045kg/dm3

solid content: 29%

viscosity: 30-35” DIN4 at 20°C

Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)

descriptionThe “KATCO” water based Lacquer is a goodquality, one component, acrylic based lacquerwith a good build and smooth touch. Withgood resistance against water, all kinds of dirtcontamination and scratches. Developed for thetransparent finishing of wooden furniture, doorsetc. Available in several gloss levers, from mat - gloss.

WB-lacquer

Brush application Pneumatic spray application

1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Apply the lacquer by brush. always workin the direction of the grain

Let it dry for about 1-2 hours

Apply a coat of the Lacquer by spray gun(nozzle size: 1.3 - 1.5 mm) (working pressure:2.5 - 3.5 bar).

Usage drying timesThe “KATCO” water based Lacquer is suitable for all

kinds of woods, indoor use only. Its easy to use and

can be applied by brush or pneumatic spray

equipment.

By a room condition of 20°C, humidity ca 65%:

1-2 hours

Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Let it dry for about 1-2 hours

thinner: water

packing: 5, 10 and 30 liter cans

available: mat, semi gloss and gloss

in storage: 12 months, in tightly sealed packing -

keep away from freezing

propertiesbase: acrylic

coverage: brush: 10-12m2/liter, spray gun: 6-7m2/liter

density: 1.000-1.045kg/dm3

solid content: 34%

viscosity: 30-35” DIN4 at 20°C

coats: for the best properties, always apply 2 coats

22

3

4

3

4Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)

Sand it very carefully, sanding paper grain 360.Apply the second layer (like step 2)

WB-woodstain

descriptionThe “KATCO” water based Stain is a water basedrange of high quality stains, for indoor use only.Specially developed for transparent coloringof wooden furniture, floors etc. It will keep thenatural look of wood and is available in almostevery color.

Brush application Pneumatic spray application

1 1 Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Apply the stain by brush. always workin the direction of the grain

Let it dry for about 1-2 hours

Apply a coat of the stain by spray gun.After ca 1 minute, equalize with a brush. alwayswork in the direction of the grain. (nozzle size: 1.0 -1.3 mm) (working pressure: 1.5 - 2.0 bar).

Usage drying timesThe “KATCO” water based Stain is suitable for all kinds

of woods. For resistance against water and dirt

contamination, it has to be finished with Oil,

Lacquer (water based, Nitro, 2-K) or Wax

By a room condition of 20°C, humidity ca 65%:

1-2 hours

Prepare the surface by sanding (grain 150-180)and remove the dust. Please be sure that thesurface is clean

Let it dry for about 1-2 hours

thinner: water

packing: 5, 10 and 30 liter cans

available: almost every color

in storage: 12 months, in tightly sealed packing -

keep away from freezing

properties

Choose your finishing (water based lacquer,Nitro, 2-K) and apply

2

3

4

3

4Choose your finishing (water based lacquer,Nitro, 2-K) and apply

2

base: acrylic

coverage: brush: 10-15 m2/liter, spray gun: 8-10 m2/liter

density: 1.000-1.150 kg/dm3 (depending on the color)

solid content: 2-14%

coats: 1 coat is sufficient, further coats will deepen

the color

WB-patina

descriptionThe “KATCO” WB Patina is a water based rangeof high quality patina´s, for indoor use only.Specially developed to create an old/used/rusticlook of wooden (distressed) furniture, floors etc.It will keep the natural look of wood and isavailable in almost every color

Brush application Pneumatic spray application

1 1 Please be sure that the surface is clean

Apply the patina by brush

Let it dry for about 1-2 hours

Apply a coat of the patina by spray gun.(nozzle size: 1.0 - 1.3 mm) (working pressure:2.5 - 3.0 bar).

Usage drying timesThe “KATCO” WB Patina is suitable for all kinds of woods.

for the resistance against water and dirt contamination,

it has to be finished with Oil, Lacquer (water based,

Nitro, 2-K) or Wax

By a room condition of 20°C, humidity ca 65%:

1-2 hours

Please be sure that the surface is clean

Let it dry for about 1-2 hours.Create the effect with scotch-brite, steel wool orsanding paper

thinner: water

packing: 5, 10 and 30 liter cans

available: almost every color

in storage: 12 months, in tightly sealed packing -

keep away from freezing

properties

Choose your finishing (water based lacquer,Nitro, 2-K) and apply

base: acrylic

coverage: brush: 12-15 m2/liter, spray gun: 10-12 m2/liter

density: 1.100-1.450 kg/dm3 (depending on the color)

solid content: 10-35% (depending on the color)

coats: 1 coat is sufficient

2

3

4

3

4Choose your finishing (water based lacquer,Nitro, 2-K) and apply

2

Outdoor paint

descriptionThe “KATCO” Outdoor paint is an easy to apply,

outdoor durable protection.

Available in various colors, ranging from

ancient tones to bright beach house colors

Brush application

1 Prepare the surface by sanding (grain 150-180) andremove the dust. Please be sure that the surface isclean

Apply the paint by brush. Always work in thedirection of the grain

Let it dry for about 2-4 hours

Usage drying timesThe “KATCO” Outdoor paint is suitable for all kinds

of woods.

By a room condition of 20°C, humidity ca 65%:

2-4 hours

thinner: water

packing: 5, 10 and 30 liter cans

available: almost every color

in storage: 12 months, in tightly sealed packing -

keep away from freezing

propertiesbase: acrylic

coverage: brush: 8-10 m2/liter

density: 1.000-1.045 kg/dm3 (depending on the color)

solid content: 40-45%

viscosity: 30-35” DIN4 at 20°C

coats: For new first time painting, we recommend to

apply minimal 2 coats. For repainting, 1 coat is sufficient

3

4Sand it very carefully, sanding paper grain 360.Apply a second layer (like step 2)

2

G. Kat & Co B.V.Havenweg 308243 PL LelystadTel: (+31) 0320 261882Fax: (+31) 0320 260168Email: info@katenco.nlwww.katenco.nl

All furniture coloring products are

developed by using as many natural,

renewable and non-harmful ingredients

as possible. if possible, the products are

water based and the used solvents are

the least harmful available. Obviously,

high quality and perfection remain the

most important ingredients. This way,

Kat & Co offers the best product, with

attention for the environment and custom

made for you