Date post: | 23-Dec-2015 |
Category: |
Documents |
Upload: | rhoda-price |
View: | 223 times |
Download: | 1 times |
Woodworker’s bench vise- mounts on workbench to
hold material while working on it.
TWIST DRILL BIT-placed in a machine to drill clean holes.
C-CLAMP- holds work pieces together. Good
for small jobs.click here
MITER BOX-used with a backsaw to make straight
cuts or cuts at precise angles.select here to view video
CARPENTER’S SQUARE-used for laying out lines
and squaring. right click here to view video
HAND SCREW CLAMP-wooden clamp used to hold wood together often for gluing.
BALL PEEN HAMMER-a hammer usually used in
working metal. Also known as a “blacksmith hammer”.
CLAW HAMMER-most common hammer, used for
pounding in nails and removing nails.
COPING SAW-has a removable blade and is used to cut intricate external shapes and internal cutouts in wood. click to view videovideo
BACK SAW- solid hand saw, often used in a miter box for
more control and precise cutting.
HACK SAW-used on metal and plastic, with removable blade.
FORSTNER DRILL BIT-used for making large clean holes and flat bottomed holes
BENCH RULE/RULER- steel or hardwood ruler used to measure short distances.
CENTER PUNCH-metal punch used to start a hole in wood before drilling.
SCRATCH AWL-used instead of a pencil to make
lines/marks on wood.
WOOD RASP-tool used to shape wood. Takes off more material than the file –
leave a course surface
HAND FILE-Used to smooth wood surfaces – removes fine amount of material
TYPES OF HAND FILESROUND- USED ON CIRCULAR OR CURVED SHAPES, USUALLY INTERI0R SHAPES
TRIANGULAR- 3 SIDES, SMOOTHS SIDES LESS THAN 90 DEGREE’S
HALF ROUND- FLAT ON ONE SIDE, HALF ROUND ON OPPOSITE SIDE,USED ON ROUNDED SURFACES
SQUARE- FOUR SIDED, USED ON 90 DEGREE EDGES/CORNERS
TYPES OF SANDPAPER
HOLE SAW DRILL BIT-Drills larger holes thru.
thinner material. click to view
DREMEL- rotary tool used for sanding, cutting, buffing, finishing work. Small jobs. right click to open video
DRILL PRESS- fixed style of drill used for drilling holes.click here for video
SCROLL SAW-electric saw, blade travels up and down, used for
intricate work. right click to view video
BAND SAW-electric saw with one continous blade. Used
for ripping with the wood grain.
video 2nd video
RADIAL ARM SAW- cutting machine consisting of a circular saw blade mounted on a sliding horizontal arm.Used most often for crosscuts(against grain) click for video