Crankshaft whirling machineWork piece length up to 4.500 mm
page 1 of 5
- Engine power of whirling unit: 100 kW
- SIEMENS 840 D – 9 Axis
- Automatic compensation of the work piece bending
Crankshaft whirling machineWork piece length up to 4.500 mm
-Full housing of the machine
with integrated service room
and switch cabinet
- Central swarf removalpage 1 of 5
Crankshaft whirling machineWork piece length up to 4.500 mm
main machine dimensions and weight (w/o switch cabinet)length incl. Chip conveyer ca. 10.000 mm
width ca. 4.000 mm
height ca. 4.000 mm
weight ca. 40.000 kgMax. work piece length 4.500 mm
Dimension switch cabinet
Length ca. 3000 mm
Width ca. 600 mm
Height ca. 2200 mmWeight ca. 2000 kg
page 3 of 5
Product range:
The whirling machine KWM 700 - 5000 is capable for
rough machining with following tolerances:
Surface quality 12,5 �mconcentricity 2,5 mm
Tolerance in length according to DIN 7168-m
Input power of the whirling unit is 100 KW for machining
crankshafts with a work piece length of up to 4.500 mm and a max. surrounding diameter of 520 mm.
Crankshaft whirling machineWork piece length up to 4.500 mm
page 4 of 5
The crankshaft is been hold on position by the
steady system of AEROBOTECH