+ All Categories
Home > Documents > Workshop 12

Workshop 12

Date post: 16-Oct-2015
Category:
Upload: polamen
View: 11 times
Download: 0 times
Share this document with a friend
Popular Tags:

of 12

Transcript
  • 5/26/2018 Workshop 12

    1/12

    MSC.Nastran 105 Exercise Workbook 12-1

    WORKSHOP 12

    The Effect of MultipleCoordinate System

    X

    Z

    P

    X

    Y

    99

    Objectives:

    Create a cantilever beam model

    Assign different coordinate systems as refferenceand displacement coordinate system

    Run an MSC.Nastran Linear Static analysis

    Modify reference and displacement coordinatesystem

    Compare the analysis results

  • 5/26/2018 Workshop 12

    2/12

    12-2 MSC.Nastran 105 Exercise Workbook

  • 5/26/2018 Workshop 12

    3/12

    WORKSHOP 12 The Effect of Multiple Coordinate System

    MSC.Nastran 105 Exercise Workbook 12-3

    Model Description:

    The goal of this example is to examine the effect of

    different coordinate systems. A linear static analysis of acantilever beam will be performed using multiple

    coordinate systems.

    We will examine the following 3 casesCase 1

    Ref. coord. =

    Disp. coord. =

    Case 2

    Ref. coord. = 99

    Disp. coord. =

    Case 3

    Ref. coord. = 99

    Disp. coord. = 99

    Question:For case 3, the displacement vectors have been shifted to

    T1 column. However, are the values correct? What about

    the SPC force ?

  • 5/26/2018 Workshop 12

    4/12

    12-4 MSC.Nastran 105 Exercise Workbook

    Figure 12.1- Grid Coordinates and Element Connectivities

    Figure 12.2- Loads and Boundary Conditions

    1 2 3 4 5

    1 2 3 4

    40

    [23, 34, 0]

    50

    1

    2

    .15

    .15

    .1

  • 5/26/2018 Workshop 12

    5/12

    WORKSHOP 12 The Effect of Multiple Coordinate System

    MSC.Nastran 105 Exercise Workbook 12-5

    Suggested Exercise Steps:

    Define a local coordinate system 99

    OriginPoint on Axis 3 Poin of plane 1-3

    Generate a finite element representation of the cantileverbeam. (i.e., The nodes (GRID) and element connectivitives(CBAR).

    Use the basic coordinate system, coord. , as the referenceand displacement coordinate systems.

    Define material (MAT1) and the element (PBAR)properties.

    Apply the fix boundary constraints (SPC1) at the left tip.

    Apply the concentiated force of 50lbs (FORCE) at the freeend.

    Prepare the model for linear static analysis (SOL 101).

    Review the results.

  • 5/26/2018 Workshop 12

    6/12

    12-6 MSC.Nastran 105 Exercise Workbook

  • 5/26/2018 Workshop 12

    7/12

    WORKSHOP 12 The Effect of Multiple Coordinate System

    MSC.Nastran 105 Exercise Workbook 12-7

    Case 1

  • 5/26/2018 Workshop 12

    8/12

    12-8 MSC.Nastran 105 Exercise Workbook

  • 5/26/2018 Workshop 12

    9/12

    WORKSHOP 12 The Effect of Multiple Coordinate System

    MSC.Nastran 105 Exercise Workbook 12-9

    Case 2

  • 5/26/2018 Workshop 12

    10/12

    12-10 MSC.Nastran 105 Exercise Workbook

  • 5/26/2018 Workshop 12

    11/12

    WORKSHOP 12 The Effect of Multiple Coordinate System

    MSC.Nastran 105 Exercise Workbook 12-11

    Case 3

  • 5/26/2018 Workshop 12

    12/12

    12-12 MSC.Nastran 105 Exercise Workbook


Recommended