Our Commitment Show
Our Commitment Show
ALLEN BUILDWELL PRIVATE LIMITED
WORLD CLASS EQUIPMENTfor Concrete Roads,
Airports, Irrigation Dams, Soil Stabilization, Recycling
Milling and many moreapplications.
Our Commitment Show Our Commitment Show
WORLD CLASSFixed & Slip form Concrete Paving Machines from USA, backed by more than 54 years experienceWorld Wide on Airport, Road & Canal Projects.
Made in USA
Fixed Form Concrete Paving Equipments
Slip form Machine for Curb, Barrier & Drain
2 Track Slip form Pavers with TC
Our Commitment Show
2 TRACK SLIPFORM CONCRETE PAVERSFOR CITY AND AIRPORT PROJECT
COMPACT FEATURES DESIGNED FOR CONFINED PROJECTS SUCH AS CITY ROADS WITH PROXIMITYTO TREES AND LAMP POSTS. EXISTING TRAFFIC TO MOVE ON ONE LANE.
PAVES 3M TO 12M.THICKNESS : 150MM TO 500MM. Made in USA
World NO-1KERB, BARRIER, DRAIN SLIPFORMING MACHINE
Made in USA
Our Commitment Show
Extended Frame To Pave Over Obstacles & Steel Form:
&Our Commitment Shows
Since 1953
PAVING OVER STEEL MAT WITH SIDE FORMS & WITHOUT SIDE FORMS
The Track and the Side Forms of the SF 1700 & SF 2700 can be separated with Extensions to the main frame and to separate the side �rms with individual Hydraulic Cylinders for Up & Down movement. This helps in the Paver tracks to Pave over Steel Forms, Ready Drains,Kerbs & any other obstacles. .
Concrete Fixed FormRiding Paver & Finishing Tools
Made in USA
ALLEN FIXED FORM PAVERS & FINISHING TOOLS ARE BEING USED ON CITY ROAD AND AIRPORTPROJECTS IN INDIA SINCE 2009
CURB FOX EQUIPMENT LLC 5000T-HD Slipform PaverWith optional heavy-duty tracks the Curb Fox 5000t-HD Slipforms pavement up to 10ft. wide and barriers up to 36in. high Curb Fox Equipment LLC - SEPTERMBER 7, 2012
Made in USA
COMPACT KERB LAYING MACHINE WITH TRACKS OR WHEELS
CUSTOM BUILTCANAL PAVING
EQUIPMENTRugged Design for Tough & Hot Site Condition.Simple in maintenance & operation.Quick change from angled to �at paving mode.
ALLEN BUILDWELL PRIVATE LIMITED
CONCRETE ELECTRICAL CYLINDER FINISHER CANAL-ROAD PAVER MACHINE
Capacity: 15 CUM- HR to 240 CUM-HR.WITH PAN OR TWIN SHAFT MIXER. SKIP OR INCLINEDAGGREGATE LOAD OUT CONVEYOR.
CONCRETE PLANTS
Designed for Quick installation & shifting of the Plant.
Minimum Foundation for Bins
PAN MIXER
TWIN SHAFTMIXER
PENTA-30COMPACT
IN-LINE BINS
IN-LINE-BINS can be placed on Compacted PCC base.Eliminates costly RCC Column construction and time.
PENTA-30
ALLEN BUILDWELL PRIVATE LIMITED PENTA-240
Inaugurated by the Chief Minister of Andhra Pradesh in presence of very Important dignitaries, TV & Press reporters. A highly important project for the new state of Andhra Pradesh. We are proud to be part of this Prestigious project.
PENTA concrete plants
3 UNITS: PENTA 240 Cum-hr DAM PLANTs were selected by the Expert Committee of POLAVARAM Project in the year 2016 over our competition because of the simplicity of our design, dual weigh conveyor system, IDS custom built Software and local availability of 90% of the spare parts.
Polavaram Dam-Spillway Project
ALLEN BUILDWELL PRIVATE LIMITED
2 TRACK, TEXTURE & CURING MACHINE
Texturing & Curing width: 3,5m to 10mTC 1000-Texure Curing machine is ef�ciently designed for smooth, straight /transverse grooves, consistently sprayed curing compound across the slab / road and sides of the slab/ road. The robust machine provides a stable platform for tining system. and a smooth propel system through all speed ranges, makes the machine simple & robust to use in the toughest Indian site conditions.
MATERIAL TRANSFER VEHICLES ASPHALT PAVERS
COLD PLANERS/ ASPHALT MILLING MACHINES
SOIL STABLILZERS / ROAD RECLAIMES
Roadtec has become a highly successful company through unparalleled customer service and by producing innovative, industry leading products.At Roadtec we are passionate about providing ground-breaking customer support. We have intentionally created an environment where engineering, manufacturing and service departments are in the same building. This gives us the unique ability to transition information easily from our team to our clients. Phone service support is available 24 hours a day, seven days a week.
Made in USA
SOIL
STABILIZERS /
ROAD
RECLAIMERS
SOIL STABILIZER WITH REAR MOUNTED CUTTER
SX-2e Soil Stebilizer
SX-6e Soil Stebilizer Reclaimer SX-5e Stebilizer Reclaimer
A SOIL STABILIZER WITH A 600 HP ENGINE MID-SIZED UNIT DESIGNED FOR SOILSTABILIZATION AND ASPHALT RECLAMATION
SX-8e Soil Stabilizer - Reclaimer
Roadtec stabilizersare ideal for roadrehabilitation, coldrecycling, and soilstablization.
Made in USA
SX-8e Features a clean-running 755 hp (563 kW) CAT® C18 engine. It is the largest, most powerful model in the company�s line of stabilizers-reclaimers. The SX-8e complies with Tier 4 interim and Stage IIIb emission standards. Weighing in at approximately 83,000 lbs (37,648 kg), the SX-8e is balanced and powerful. Four cutting speeds and right-hand �ush cut allow you to use the SX-8e for a range of projects including stabilizing, pulverizing, or cold recycling.
COLD PLANERS
ASPHALT
MILLING
MACHINES
Powerful and well-
balanced, Roadtec
asphalt milling
machines will
outwork the
compe��on. RX-100eHIGHLY EFFICIENT UTILITY MILLING MACHINE FOR
USE IN SMALLER AREAS
RX-300e/ex
RX-600e/ex
COMPACT MILLING MACHINE WITH A BASECUTTING WIDTH OF 48”AND A DEPTH OF 12”
VERSATILE MILLING MACHINN WITH A CUTTINGDEPTH OF 13” AND A WIDTH OF 86”
RX-700e/ex
RX-600eLR
MILLING MACHINE WITH THE ABILITY TO CUT 14”DEEP AND 120” WIDE
PERFECT MACHINE FOR OBSTACLES - ALLOWS TOCUT FLUSH ON BOTH THE LEFT AND
RIGHT HAND SIDE
Made in USA
MATERIAL
TRANSFER
VEHICLESRoadtec MTVsProvide Con�nuousPaving And ReduceThe Mumber Of HaulTrucks Needed. Material Transfer Vehicles (MTVs) offer several
unique advantages to the process of constructing
asphalt pavements, including addressing issues associated with trucking, material segregation,
and thermal segregation. Roadtec MTVs are designed to lower operating costsby allowing for
continuous paving and reducing the number of haul trucks needed.
MTVs are used to assist the paver in accepting Hot Mixed Asphalt (HMA). Pavers are normally
equipped to receive HMA in two styles of dump trucks: live bottom or end dump trucks. Our MTVs
are equipped to handle the additional surge volume from both types of trucks. This is
advantageous because it allows the
paver to operate continuously without
stopping. With continuous paving,
you can minimize truck waiting times,
decrease temperature differentials,
and reduce aggregate segregation.
Roadtec offers three different models
of Material Transfer Vehicles to
address the needs of any Hot or
Warm Mix Asphalt project. Our three
models can handle everything from
10 to 25 tons of asphalt mix capacity.
MTV-1100e
The MTV-1100e and MTV-1105e share the same
material handling, frame structure and controls.
Provide Non-Contact paving with the ability to easily
manoeuvre in tight work spaces, Experience
Roadtec’s famous performance on wheels or tracks,
Made in USA
MATERIAL
TRANSFER
VEHICLES
Roadtec MTVsProvide Con�nuousPaving And ReduceThe Mumber Of HaulTrucks Needed.
Shu�le Buggy ®
The SB-2500e/ex Shuttle Buggy® material transfer vehicle (MTV) can store and transfer
hot-mixed asphalt material from a truck to a paver for continuous paving.
A patented anti-segregation auger remixes materials for control of aggregate and temperature segregation, just before delivery to the asphalt paver. .
The 25-ton surge capacity of the Shuttle Buggy® MTV allows trucks to unload material
immediately and return to the asphalt plant. .
.The SB-1500e can store up to 15 tons of asphalt mix. Made in USA
MTV with a 25 ton asphalt mix capacity
COLD IN PLACE
RECYCLING
RT-500 Cold-in-Place Recycle
COLD IN PLACE RECYCLING
WITH A RATING OF 500 TPH IT IS CAPABLE OFRECYCLING MILES OF ROAD IN AN EXTERMELY
SHORT AMOUNT OF TIME
What Is Cold In Place Recycling (CIR) and what are its benefits?
Cold in-place recycling (CIR) is a paving process where instead of applying all new Hot
Mix Asphalt (HMA), you treat remove and treat the existing asphalt with bituminous
and/or chemical additives and then use it to pave the road. It normally involves a
recycling train consisting of recycling agent tankers,a milling machine, an asphalt
paver and a combination of compaction equipment. The milling machine grinds off the
top 2 to 5 inches of asphalt and mixes it with an asphalt recycling agent from the tanker.
Then the paver lays the mixture back down onto the surface followed by the rollers for
compaction. The process usually occurs at a temperature of 100 degrees to 120
degrees, which in asphalt paving is considered "cold." The benefits of cold in-place
recycling are it is generally more cost-effective, environmentally friendly and lasts
longer than traditional
paving processes.
If you’re interested in
learning more about
our milling machines
a n d c o l d i n - p l a c e
recycling machines,
get in contact with Allen
Buildwell today!
Made in USA
RX-900e/exWith 1055 hp the RX- 900e/ex is the most produc�ve cold planer available.
Made In Germany SBF-24-6
SBF-24-6SINGLE PRIME MOVER FOR BOTH OPERATIONS SIMULTANEOUSLY
Power requirement carrier: from 260 hp• Weight: 9,110 kg.• Cutting depth max. 400 mm• Cutting width: 2,400 mm
Dust-Free Spreading, Grinding and wetting in one process: The enclosed combination of the Stehr SBF 24 soil stabilization grinder and the SBS bonding agent spreader solves one of the biggest problems in soil stabilization work: When used as bonding agents. lime and cement are very effective. but also relatively harsh and caustic. This makes it almost impossible to stabilize soil near residential areas. traffic, parked cars and airports. especially in windy weather.
Solution: This equipment combination spreads and mixes the bonding agent into the soil without creating any dust. Now you don't need a separate and expensive spreading vehicle.
Option: Via an on-board computer developed specifically for the purpose the quantities of bonding agent and water can be introduced and documented exactly.
Computerized software housed inside the Prime Mover, gives indication of progress of work, depth, production details and other important parameters.It also stores enough data of daily production in its memory.
SOIL STABILISERS & BINDING AGENT SPREADERS
Made In Germany
(Drum width 2m to 2.4m)With Prime Mover(Soil Stabilization &Reclaimer)
Soil StabilizerSBF 24
As illustrated in IRC Manual for Soil Stabilization: IRC: SP.89(Part II)-2018
Made In Germany
VERSATILE & ECONOMICAL MACHINERY TOSTABILISE CEMENT TREATED SOILCOMPACT, GRADE, CEMENT ( BINDER) SPREADER,USING THE COMMON PRIME MOVER.
MOST ECONMICAL BINDER ( CEMENT) SPREADER
MANHOLE CUTTER
The ultimate levelling machine for the maintenance and construction of gravel roads. The crease blade invented by Stehr can be used to produce all road construction pro�les. It is also possible to install a crown with one run.
TRENCH CUTTERS
GRADER
COMPACTOR
For Digging, laying & �lling back soil To lay optic �bre cables at therate of 1 kms per hour.
Keeps your equipment always in use on sites for various applica�on
Made In Germany
Made In Germany
PORTABLE BINDER ( CEMENT ) SPREADER
STEHR SBS 6000Binder volume: 6 m3 Weight: 2460 kgWidth: 2610 mmHeight: 2675 mmLength: 3750 mmspread width: 2400 mm / 1200 mm (hydraulically halved)Tractor: from 80 HP
SBS 6000 SBS 10
STEHR SBS 10Binder volume 10 m3 Weight: 3670 kg.Width: 2665 mmHeight: 3190 mmLength: 4775 mmSpread width: 2400 mm / 1200 mm (to be hydraulically halved)Tractor: from 130 HP
Fill Level check: optical with electronic sensors.� Trailer with hydraulically adjustable hitch and compressed air brake.
� No conveyor belt, no screw conveyor, no bridging.� Dust �lter : the blowing air escaping during �lling is cleaned via a dust �lter
developed by Stehr. This is easy to clean and maintenance-friendly
Experienced Leaders in Road Milling Equipment. RoadHog a t tachments are ideal for many applications in road maintenance and building.Our machines are well suited for milling asphaltprior to overlay, repairing potholes, base failures, road and shoulder reclamation, full depth reclamation (FDR), soil stabilization and cutting utility trenches.
Made in USA
RoadHog has a complete line of hydraulically powered attachmentsand self-contained, engine driven attachments to match the right work tool for the job at hand, matched with unparalleled customer support.RoadHog of fers hydraul ic co ld planers,road saws and brooms for both standard �ow and high �ow skidsteers that can be con�gured to run on any make and model of skidsteer. Engine driven cold planers are manufactured in models from 24-inch to 96-inch cutting widths, equipped with 67hp to 275hp Caterpillar Tier 4 engines which can be matched with a wide variety of host vehicles including skidsteers, loader backhoes and wheel loaders.
Binder Spreader on Truck
Model: S-CS-20Binder Spreader suitable forSoil Stabiliza�on and Cold recycling.Truck requirement: Minimum 3 Axle Truck.
Designed for Hot & Humid site condi�ons
Cover the en�re Indian Subcon�nent
ALLEN BUILDWELL PRIVATE LIMITED
Round the clock Spares & Service support fromKarsundi & Taloja unit.
Dispatch of spares & assemblies from Karsundi Unit Tal: Khalapur , Dist: Raigad (Maharashtra State), India.
ALLEN BUILDWELL PRIVATE LIMITED
ALLEN BUILDWELLUNIT NO-2(Manufacturing Unit) Talasari, Maharashtra..50,000 sq.ft built up.
Dedicated for ManufacturingConcrete Plants, Texture CureMachine, Concrete Fixed Form Pavers.
Allen BuildwellUnit No-3 (Service & Spares Depot)
FOR DETAILED INFORMATION, PLEASE CONTACT:
ALLEN BUILDWELL PRIVATE LIMITED
Mumbai Sales Office: B 206, Arjun Centre, Govandi (E), Mumbai-88. India.
022 -25569044, 25513030 Landline: Web Site:www.allenbuildwell.com
[email protected] Email:[email protected]
8422892959Mumbai Sales:
LOCAL DEALER
