Facility Specifications
Facility Specifications
Enfocus Software - Customer Support
Worldwide Offshore Service Teams Deep Draft Rig Solutions (DDRS)
World Marine provides quality service teams to offshore sites. Highly skilled and experienced in their respective disciplines, our offshore workers are hand-picked to suit each task. Expedited mobilization from our Mississippi location allows World Marine to respond quickly to our customers’ needs. Turnkey repair, replacement or modification services include prefabrication, mobilization, scaffolding, hot work, testing and painting.
Laser Scanning
Laser Scanning BenefitsWorld Marine is equipped with state-of-the-art
laser scanning equipment.
• Survey information collected faster, more accurately and safer vs. conventional survey methods o Survey data is stored in a database for future use• Scans from multiple vantage points o Creates highly detailed 3-D surveys o Orthographic Images o Captures existing pipe, structure and geometric shapes o Instant point and click measurements• Accuracy retained when exported into 3D Modeling Programs o Accuracy: +/- 2mm at 25m o Range: 0.6m – 76m o Data collection rate: 120,000 points/second o Up to 700 million points/scan• Multiple scans are combined to create a 3-D Point Cloud Model o Completed survey: 8 hours• Generated from Model o Accurate bill of material o General and piping arrangements o Equipment details and pipe spool drawings o Virtual walkthroughs
A GOM Deepwater Site for Thruster Removal and Installation
Location: Viosca Knoll 248
Width Restrictions: None
Distance from World Marine East Facility: 38 miles Water Depth: 120’ (36.6m) -- minimal slope Sea Conditions: Minimal Current & Wave Impact No Loop Currents
DDRS Advantages• Deep Draft Rig mooring location near full-service yards• A benign sea-state, deep-hole, nearby site for thruster change out• Turnkey full service solution with a single prime contractor
• Thruster work done by specialized team with 14+ years of thruster install/pull experience (including thruster OEM)• World Marine recommends, customer reviews/chooses subs; one-stop-shop accountability• Fully integrated master execution plan updated in real-time• Well equipped onshore facility with dedicated shops for thruster work, space for storage of OFE • Easy access and minimal transit for crew change-out• Onshore housing available at our shipyard location• Work barges and mobile cranes at the offshore worksite• Utilize World Marine facilities in Pascagoula, MS or Mobile, AL for support
Offshore Work• Demolition and Prep for installation of Pre-Fabricated Components• Installation of Heavy Weldments and High Pressure Piping Systems• Leg up, leg down or leg repairs on jack up rigs• Quarters modifications and additions, including 3rd party assistance for turnkey work• Platforms, Wing Decks, Blisters, Columns, Sponsons, Pontoons • Resumes of key offshore crew available upon request• Full support project management
Joe Roche Vice President of Sales & Marketing
World Marine, LLC+1.281.899.2121 direct
+1.713.557.4397 [email protected]
Rob Busby Vice President of Business Development
World Marine, LLC+1.281.899.2122 direct
+1.713.557.4517 cell [email protected]
Michael KnightSales RepresentativeWorld Marine, LLC
+1.281.415.0174 cell [email protected]
Ryan B. Roth, P.E. Vice President of Sales & Marketing
World Marine of Alabama, LLC+1.251.338.7209 direct
+1.251.533.8792 cell [email protected]
Peter Maschke
Director of International Sales World Marine of Alabama, LLC
+1.251.625.6213 direct +1.251.610.5236 cell
Manuel Otano Director of Latin American Sales World Marine of Alabama, LLC
+1.251.622.8535 cell [email protected]
www.worldmarine.com
Alabama Operations MS Operations (East) - Pascagoula MS Operations (West) - Pascagoula
Shipbuilder’S CounCil of AmeriCA
AwArd for exCellenCe in SAfety
2003, 2004, 2005, 2006, 2008, 2009, 2010, 2011, 2012,2013, 2014
Access: 10 nautical miles to open sea Total Area: 94 acres (38 ha) Water Frontage: 2,000 LF (610 m) Water Depth: 42 ft. (12.8 m) Vertical Height Restrictions: None Quayside Gantry Load Out: 1,660 ft. x 250 ft. (506 m x 76 m) Deep Hole: 500 ft. x 300 ft. x 60 ft. (152 m x 91 m x 18 m) Fabrication Area: Covered 100,000 sq. ft. (9,290 m2) Outside 360,000 sq. ft. (33,631 m2) Inside Blast/Paint Area: 50’ x 100’ x 25’ (15 m x 30 m x 8 m) Outside Platen Area: 600’ x 600’ (183 m x 183 m) 25,000 T capacity, 5,000 psf (12.2 MT/sqm) Warehouse: (2) 100’ x 210’, 21,000 sq. ft. each (30.5 m x 64 m x 1,952 m2 each)
Access: 26 nautical miles to open sea Total Area: 53 acres (21 ha) Water Frontage: 4,400 ft. (1,341 m) Water Depth: Channel maintained to 44 ft. (13.4 m) Vertical Height Restrictions: None Fabrication Area: Covered 100,000 sq. ft. (9,290 m2) Outside 300,000 sq. ft. (27,871 m2) Warehouse Area: Covered 50,000 sq. ft. (4,645 m2)
Access: 16 nautical miles to open sea Total Area: 13 acres (8 ha) Water Frontage: 1,100 ft. (335 m) Water Depth: 38 ft. (11.6 m) Fabrication Area: Covered 12,000 sq. ft. (1115 m2) Outside 100,000 sq. ft. (9,290 m2)
Dry Dock 1—Panamax Floating Dry Dock • Lift capacity: 22,000 (19,958 MT) displacement tons maximum lift • Length overall: 692 ft. (211 m) • Length on blocks: 668 ft. (204 m) • Clearance inside wing wall fenders: 118 ft. (36 m) • Clearance working area between wing walls: 122 ft. (37 m) • Standard block height: 6 ft. (2 m) • South wing wall crane: 120 ft. (37 m) reach with 12-1/2t capacity 65 ft. (20 m) reach with 40t capacity • North wing wall crane: 80 ft. (24 m) reach with 5t capacity 25 ft. (8 m) reach with 26t capacity
Dry Dock 2—Floating Dry Dock • Lift capacity: 4,200 (3,810 MT) displacement tons at maximum lift • Length overall: 240 ft. (73.2 m) • Length on blocks: 240 ft. (73.2m) • Clearance inside wing wall fenders: 83 ft. (25.3 m) • Standard block height: 4 ft. (1.2 m)
Cranes/Load Handling • 100t Revolving Floating Crane • Hydraulic Cranes—crawler and rubber tire ranging from 45t to 225t lifting capacity • Overhead cranes with 10t to 60t lifting capacity for a combined 200t capacity
Shops/Yard Equipment • Electrical shop • Pipe shop • CNC plasma/oxy cutting plate burning table • Full service machine shop with highly skilled machinist • Covered panel line with single sided welder and 8 head stiffener welder
Dual Carrier Floating Dry Dock • Clear Deck: 364 ft. (111 m) • Width: 203 ft. (62 m) • Depth: 25 ft. (8 m) • Max Capacity: 20,000 MT
Cranes/Load Handling • Overhead shop bridge cranes from 5t to 40t capacity • (2) rail mounted gantry cranes—125t, 150t • 40t platen bridge gantry • (2) 150t barge mounted ringer cranes • (2) crawlers—300t, 200t
Shops/Yard Equipment • Full service machine shop • Full service pipe shop • Automated wheelabrator with 12 ft. (4 m) roller bed • Automated panel line with 300 ft. (92 m) bed • Tandem 40 ft. (12 m), 750t brake press • 2” plate roll • CNC plasma/oxy cutting plate burning tables • CNC shape cutting robot
Dual Carrier Floating Dry Dock• Clear Deck: 364 ft. (111 m)• Width: 203 ft. (62 m)• Depth: 25 ft. (8 m)
Cranes/Load Handling• Overhead shop bridge cranes from 5t to 15t capacity• 300t ringer crane
Shops/Yard Equipment• Machine shop• Pipe shop
Conveniently located on the Gulf of Mexico, World Marine offers marine services for new construction, module fabrication, upgrade, renewal, conversion, repair, dry docking and on-location work for rigs and vessels.
Marine construction and repair facilities include three dry docks; a 22,000 ton Panamax class, a 4,200 ton and a 20,000 MT heavy lift dry dock. Yards are equipped with full service machine and pipe shops along with water frontage for mooring.
At World Marine, the focus is always on safety. Our facilities have been consistently recognized by the Shipbuilder’s Council of America among the safest shipyards in the United States.
World Marine maintains an ISO 9001:2008 accredited Quality Management System.
World Marine’s Engineering Department is staffed by experienced and knowledgeable engineers, designers and support personnel.
Seasoned estimators, schedulers and project managers make the project management process timely and efficient by following a proven and consistent plan that eliminates the need to reinvent methods from one project to the next.
C e r t i f i e d
I S O9 0 0 1
ISO 9001 – 2008TRC 00360 – MSTRC 00584 – AL