Date post: | 25-Feb-2018 |
Category: |
Documents |
Upload: | anonymous-wa6nguykld |
View: | 221 times |
Download: | 0 times |
of 13
7/25/2019 Woven Shirt Measurement Method
1/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 1
Woven Shirt Measurement Method
Objectives:
To serve as a general guideline when conducting measurement inspection of the garment when
buyers measurement is not available. All the measurement must meet the acceptabletolerance set by the Customer as stated in the Customer Specs. Measurement should be taken
on a clean, flat and smooth surface. Garment is measured in the condition of button up unless
otherwise stated. Pleats must be open and smoothed of all wrinkles for accuracy.
Sr. ITEM DESCRIPTION
&
INSTRUCTION
SKETCH
1 Collar Button To Button-Hole:
With collar laying flat,
measure along the center of
the collar stand
from the center of the
button to end of the
buttonhole
2 COLLAR HEIGHT CB
Measure from collar edge to
collar stand join seam at
center back.
3 COLLAR POINT:
Measure along the edge of
collar from point to seam.
7/25/2019 Woven Shirt Measurement Method
2/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 2
4 NECK BAND HEIGHT:
Measure from collar join
seam to neck join seam at
center back.
5 NECK BAND PEAK (
SQUARE / ROUND ):
Measure from end of collar
stand to the end of the
collar.
6 Collar Spread:
Measure distance of collar
point to point with garment
laying flat.
7 Tie Space:
With shirt buttoned and
laying flat, measure space
from collar join seam to
collar join seam at front.
7/25/2019 Woven Shirt Measurement Method
3/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 3
8 HALF CHEST 2.5 CM BELOW
ARMHOLE:
Measure 1 inch below
armhole and then straight
across from edge to edge.
9 HALF WAIST 20CM BELOW
ARMHOLE:
Measure at the narrowest
point between chest and
sweep from edge to edge.
7/25/2019 Woven Shirt Measurement Method
4/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 4
10 HALF BOTTOM HEM:
Measure straight across
from edge to edge
11 SHOULDER
12 CB YOKE HEIGHT:
Measure from center back
neck seam straight down to
bottom of yoke.
13 ACROSS SHOULDER:
Measure straight across
from top of left armhole
seam to top of right armhole
seam.
14 ACROSS BACK YOKE AT
SEAM:
Measure straight across
from top of left armhole
seam to top of right armhole
seam.
7/25/2019 Woven Shirt Measurement Method
5/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 5
15 HALF ARM HOLE CURVED:
Lay garment flat, aligning
the front and back armhole
seams, and position the
sleeve so that the armholeseam has no wrinkles. Then
measure, following the
armhole seam curve from
top to bottom.
16 F/S LENGTH INCLUDUNG
CUFF:
Measure the points starting
at armhole seam to straight
down outside of the sleeve
fold to bottom edge.
17 H/S LENGTH:
Measure the points starting
at armhole seam to straight
down outside of the sleeve
fold to bottom edge
7/25/2019 Woven Shirt Measurement Method
6/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 6
18 SLEEVE PLACKET LENGTH:
Measure from top edge of
placket to cuff join seam.
19 SLEEVE PLACKET WIDTH:
Measure edge to edge.
20 SLEEVE BOX (FIRST &
SECOND LINE):
7/25/2019 Woven Shirt Measurement Method
7/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 7
21 HALF SLEEVE OPEN ( 1/2 ):
Measure along opening,
edge to edge.
22 HALF SLEEVE HEM:
Measure from stitch line to
bottom edge.
23 CUFF EDGE TO EDGE:
Unbutton cuff and measure
from edge to edge.
24 CUFF HEIGHT:
Measure from bottom edge
to top edge.
7/25/2019 Woven Shirt Measurement Method
8/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 8
25 CUFF PLEAT ( FIRST &
SECOND):
Measure from the edge of
diamond placket to the
crease of the pleats
26 BACK LENGTH:
Measure from center back
neck seam straight down to
the bottom edge.
7/25/2019 Woven Shirt Measurement Method
9/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 9
27 FRONT PLACKET WIDTH:
Measured from edge to
edge, or edge to stitch line,
and for faced plackets
measure from the inside
facing edge to edge.
28 BUTTON PLACKET WIDTH:
Measured from edge to
edge, or edge to stitch line,
and for faced placketsmeasure from the inside
facing edge to edge
7/25/2019 Woven Shirt Measurement Method
10/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 10
29 POCKET PLACMENT FROM
SHOULDER POINT:
Front shoulder seam where
it meets under collar, then
straight down to top of weltpocket.
30 FRONT PLACKET END TOPOCKET:
Measure from placket edge
to the edge of the pocket.
7/25/2019 Woven Shirt Measurement Method
11/13
7/25/2019 Woven Shirt Measurement Method
12/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 12
33 POCKET HEM:
Measure from the top of the
pocket to the stitch of the
hem.
34 FRONT LENGTH FROM
SHOULDER SEAM:
Measure from HPS neck join
seam to the bottom of the
garment keeping the tape
parallel to the center front.
If garment has a shirt tail,
measure to the imaginary
line of the lowest point.
7/25/2019 Woven Shirt Measurement Method
13/13
VARDHMAN NISSHINBO GARMENT COMPANY LTD.
QUALITY MANUAL Page 13
35 Button Placement:
Measure from center button
to center of next button.