WPSv2.0.10-9YZ-05134-0204-PCZZA

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

1/58

Title page

Alcatel-Lucent 9952Wireless Provisioning System | Version 2.0

Bulk Automated Scenarios User Guide for LTE

9YZ-05134-0204-PCZZAIssue 1 | October 2012

Alcatel-Lucent ProprietaryUse pursuant to applicable agreements

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

2/58

Legal notice

Legal notice

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective

owners.

The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.

Copyright 20102012 Alcatel-Lucent. All rights reserved.

Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside

Alcatel-Lucent without its written authorization.

Not to be used or disclosed except in accordance with applicable agreements.


8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

3/58

Contents

About this document

Purpose ............................................................................................................................................................................................. xixi

Reason for reissue ........................................................................................................................................................................ xixi

Intended audience ......................................................................................................................................................................... xixi

Supported systems ...................................................................................................................................................................... xiixii

Conventions used ........................................................................................................................................................................ xiixii

Related information...................................................................................................................................................................

xiiixiii

Document support ...................................................................................................................................................................... xivxiv

Technical support ....................................................................................................................................................................... xivxiv

How to order ................................................................................................................................................................................ xivxiv

How to comment ........................................................................................................................................................................ xivxiv

1 Bulk operations overview

Overview ...................................................................................................................................................................................... 1-11-1

Bulk operations description .................................................................................................................................................. 1-21-2

Bulk operations GUI ................................................................................................................................................................ 1-41-4

Input files ..................................................................................................................................................................................... 1-61-6

Procedure 1-1: Generate a spreadsheet template ........................................................................................................... 1-91-9

Procedure 1-2: Import a bulk workbook ........................................................................................................................ 1-111-11

2 Bulk operation scenarios

Spreadsheet input file format ................................................................................................................................................ 2-12-1

Multi ENodeB Cloning (from LA5.0.0) ........................................................................................................................... 2-22-2

Multiple Lte To Lte Neighboring Plan Rebuild and Update (from LA5.0.0) ..................................................... 2-22-2

Multiple Lte To OneXRtt Neighboring Plan Rebuild and Update (from LA5.0) ............................................. 2-32-3

....................................................................................................................................................................................................................................

Alcatel-Lucent 9952 WPS9YZ-05134-0204-PCZZA Version 2.0Issue 1 October 2012


iii

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

4/58

Multiple Cell PCI Configuration (from LA4.0.1) ......................................................................................................... 2-42-4

Multiple Enb IP Address Migration (up to TLA5.x and before LA4.0.1) ............................................................ 2-42-4

Multiple Initial ANR List Creation (for LA4.0.1) ........................................................................................................ 2-62-6

Multiple Initial ANR List Creation (for LA5.0.0)........................................................................................................

2-72-7

Multiple Interface Creation (from LA4.0.1) ................................................................................................................... 2-72-7

Multiple Interface Deletion (from LA4.0.1) ................................................................................................................... 2-92-9

Multiple Lte To Gsm Neighboring Plan Rebuild and Update (from LA5.0) .................................................... 2-112-11

Multiple Lte To Hrpd Neighboring Plan Rebuild and Update (from LA5.0) ................................................... 2-112-11

Multiple Lte To Utran Fdd Neighboring Plan Rebuild and Update (from LA5.0) ......................................... 2-122-12

Multiple Lte To Utran Tdd Neighboring Plan Rebuild and Update (from LA5.0) ........................................ 2-132-13

Multiple Transport Configuration (from LA4.0.1) .................................................................................................... 2-132-13

Multiple eNodeB Creation (for LA4.0.1) ...................................................................................................................... 2-162-16

Multiple eNodeB Creation (up to TLA5.x and before LA4.0.1) .......................................................................... 2-182-18

A Abbreviations

Abbreviation expansions ....................................................................................................................................................... A-1A-1

Index

Contents

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

iv Alcatel-Lucent ProprietaryUse pursuant to applicable agreements

Alcatel-Lucent 9952 WPS9YZ-05134-0204-PCZZA Version 2.0

Issue 1 October 2012

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

5/58

List of tables

1 Changes since the last software release ................................................................................................................ xixi

2 Supported LTE RAN interfaces ............................................................................................................................. xiixii

2-1 Enb IP Address Migration worksheet usage .................................................................................................... 2-52-5

2-2 Multiple Interface Creation worksheet usage .................................................................................................. 2-82-8

2-3 Multiple Interface Deletion worksheet usage ............................................................................................... 2-102-10

2-4 Multiple Transport Configuration (from LA4.0.1) worksheet usage ................................................... 2-152-15

2-5 Multiple eNodeB Creation (for LA4.0.1) worksheet usage....................................................................

2-172-17

2-6 Multiple eNodeB Creation (up to TLA5.x and before LA4.0.1) worksheet usage ......................... 2-202-20

....................................................................................................................................................................................................................................



v

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

6/58

List of tables

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

vi Alcatel-Lucent ProprietaryUse pursuant to applicable agreements



8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

7/58

List of figures

1-1 Bulk operations workflow ...................................................................................................................................... 1-31-3

1-2 Bulk operations menu on the main window .................................................................................................... 1-41-4

1-3 Operation screen example ...................................................................................................................................... 1-71-7

....................................................................................................................................................................................................................................



vii

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

8/58

List of figures

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

viii Alcatel-Lucent ProprietaryUse pursuant to applicable agreements



8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

9/58

List of procedures

1 Bulk operations overview

1-1 Generate a spreadsheet template .......................................................................................................................... 1-91-9

1-2 Import a bulk workbook ....................................................................................................................................... 1-111-11

....................................................................................................................................................................................................................................



ix

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

10/58

List of procedures

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

x Alcatel-Lucent ProprietaryUse pursuant to applicable agreements



8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

11/58

About this documentAbout this document

Purpose

This document is the Alcatel-Lucent 9952 WPS Bulk Automated Scenarios User Guide for

LTEof the Alcatel-Lucent 9952 Wireless Provisioning System (WPS). This document

describes the graphical user interface (GUI) of the bulk operations and includes

procedures to use the wizards. The Alcatel-Lucent 9952 WPS is an optional tool in the

Alcatel-Lucent Long Term Evolution (LTE) Radio Access Network (RAN) product suite.

Reason for reissue

Table 1 Changes since the last software release

Location Change

Bulk operations GUI (p. 1-4) Updated the graphic and listing of the Bulk

wizards.

Chapter 1, Bulk operations overview Created two generic procedures that work with

any of the Bulk wizards.Chapter 2, Bulk operation scenarios Added additional information about the new

Bulk wizards, and made the description

structure of the previous wizards match the

newer wizards.

Intended audience

This document is intended for engineering personnel responsible for configuring the LTE

RAN network as part of an LTE network. To use this document effectively, LTE RAN

engineering personnel must have good knowledge and understanding of the LTE RANconfiguration principles, and be familiar with the other documents in Related

information (p. xiii).

...................................................................................................................................................................................................................................



xi

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

12/58

Supported systems

This document applies to the System Release LTE RAN frequency division duplex (FDD)

and TLA time division duplex (TDD).

The Alcatel-Lucent 9952 WPS is a kernel application for the standalone 9952 WPS tool

running on a standard Microsoft Windows, Microsoft Vista, orMicrosoft Windows 7

based PC in a standalone PC environment or on Citrix Systems, Inc. Citrix servers in a

multi-user environment. For details on the system requirements, see Alcatel-Lucent 9952

Installation and Administration Guide, 9YZ-05134-0001-RJZZA.

The following information defines the network elements and interfaces supported by the

Alcatel-Lucent 9952 WPS v2.0.10.

Releases

The following releases are supported:

LA5.0, MIM 20.4.4

LA4.0, MIM 10.6.4 LA3.0, MIM 7.5.1

TLA5.1, MIM 14.1.1

TLA4.0, MIM 11.4.1

TLA3.0, MIM 8.3.1

Interfaces

The following table identifies the LTE RAN interfaces supported by the Alcatel-Lucent

9952 WPS:

Table 2 Supported LTE RAN interfaces

Interface Description

S1

(eNodeB to MME)

Used for session management, mobility

management, and user plane data.

X2

(eNodeB to eNodeB)

Used for user plane signaling and data transfer

during a handoff between eNodeBs

Conventions used

The following typographical conventions are used in this manual:

Appearance Description

emphasis Text that is emphasized

document titles Titles of books or other documents

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

xii Alcatel-Lucent ProprietaryUse pursuant to applicable agreements



8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

13/58

Appearance Description

file or directory names The names of files or directories

graphical user interface text Text that is displayed in a graphical user

interface or in a hardware label

keyboard keys The name of a key on the keyboard

system input Text that the user types as input to a system

Command names and text that the user types

or selects as input to a system

system output Text that a system displays or prints

variables A value or command-line parameter that the

user provides

[ ] Text or a value that is optional

{value1 | value2}

{variable1 | variable2}

A choice of values or variables from which

one value or variable is used

Specifies:

Text that is time-dependent (such as

release, version, date, or time stamp)

displayed in file and directory names

A value that the user supplies

> Indicates access to a function through a menu

sequence.

Example:

Select Interfaces > Template > Import

+ The + (plus) symbol is used to form key

combinations that are pressed simultaneously,

such as SHIFT+ALT+L.

Related information

The following documents are referenced in this document or include additional

information relevant to this document. Refer to Alcatel-Lucent 9400, LTE Radio Access

Network, Customer Documentation Overview, 9YZ-03990-0002-ACZZA for the purpose

of each LTE RAN document listed.

Alcatel-Lucent 9400, LTE Radio Access Network, Terminology Overview,

9YZ-03990-0003-TQZZA

Alcatel-Lucent 9400, LTE Radio Access Network, RAN Overview, 9YZ-03990-0004-

TQZZA

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



xiii

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

14/58

Alcatel-Lucent 9412 eNodeB, FDD Parameters Reference Guide, 9YZ-03990-0103-

RKZZA

Alcatel-Lucent 9952 Installation and Administration Guide, 9YZ-05134-0001-RJZZA

Alcatel-Lucent 5620 Service Aware Manager User Guide

Alcatel-Lucent 5620 Service Aware Manager System Architecture Guide

Alcatel-Lucent 5620 Service Aware Manager LTE RAN User Guide

Document support

For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at

one of the following telephone numbers:

1-888-582-3688 (for the United States)

1-630-224-2485 (for all other countries)

Technical support

For technical support, contact your local Alcatel-Lucent customer support team. See the

Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact

information.

How to order

To order Alcatel-Lucent documents, contact your local sales representative or use Online

Customer Support (OLCS) (http://support.alcatel-lucent.com).

How to comment

To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-lucent.com/comments/) or e-mail your comments to the Comments Hotline

([email protected]).

About this document

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

xiv Alcatel-Lucent ProprietaryUse pursuant to applicable agreements


http://www.alcatel-lucent.com/support/http://www.alcatel-lucent.com/support/http://support.alcatel-lucent.com/http://support.alcatel-lucent.com/http://support.alcatel-lucent.com/http://infodoc.alcatel-lucent.com/comments/http://infodoc.alcatel-lucent.com/comments/http://infodoc.alcatel-lucent.com/comments/http://infodoc.alcatel-lucent.com/comments/mailto:[email protected]:[email protected]:[email protected]:[email protected]://infodoc.alcatel-lucent.com/comments/http://infodoc.alcatel-lucent.com/comments/http://infodoc.alcatel-lucent.com/comments/http://support.alcatel-lucent.com/http://support.alcatel-lucent.com/http://support.alcatel-lucent.com/http://www.alcatel-lucent.com/support/http://www.alcatel-lucent.com/support/

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

15/58

1 1Bulk operations overview

Overview

Purpose

This chapter describes the LTE-specific bulk operations supported by the Alcatel-Lucent

9952 WPS (9952 WPS). The service provider technician may use bulk operations toconfigure multiple network elements (NEs) or managed objects (MO) in a single

operation.

For additional information on LTE network configuration management, see the following

documents:

Alcatel-Lucent 5620 Service Aware Manager System Architecture Guide

Alcatel-Lucent 5620 Service Aware Manager User Guide

Alcatel-Lucent 9952 Wireless Provisioning System (WPS), WPS User Guide,

418-000-201

Contents

Bulk operations description 1-2

Bulk operations GUI 1-4

Input files 1-6

Procedure 1-1: Generate a spreadsheet template 1-9

Procedure 1-2: Import a bulk workbook 1-11

...................................................................................................................................................................................................................................



1-1

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

16/58

Bulk operations description

Additional license required

The Alcatel-Lucent 9952 WPS Bulk operations feature is an additional option to the

Alcatel-Lucent 9952 WPS product and requires a separate license. For more information,see Alcatel-Lucent 9952 Installation and Administration Guide, 9YZ-05134-0001-

RJZZA.

Actions performed

Alcatel-Lucent 9952 WPS provides a bulk operation mechanism that automatically

performs the following actions:

Create a workorder to gather the provisioning data related to a specific bulk operation.

Run the required unitary operations in sequence, based on the input data available in a

Microsoft Excel spreadsheet input file.

The Excel file contains the configuration data and the keys for network elements(NEs) or managed objects (MOs) that are loaded into the Alcatel-Lucent 9952 WPSfor bulk operations.

Each bulk operation calls existing Alcatel-Lucent 9952 WPS operations but uses

spreadsheet data as input instead of manual input. Each bulk operation is based on

existing operations (including checks validation) and if an existing operation

computes data, that data does not need to be provided in the spreadsheet input file.

Figure 1-1, Bulk operations workflow (p. 1-3) shows the steps involved in a bulk

operation.

Bulk operations overview Bulk operations description

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................

1-2 Alcatel-Lucent ProprietaryUse pursuant to applicable agreements



8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

17/58

Note: The MOs for the bulk operation are defined in the external input file and do not

depend on the current selection. Therefore, the bulk operation is available on every

NE including the root node.

Excel spreadsheet input file compatibility

The Alcatel-Lucent 9952 WPS Excel spreadsheet input files are Alcatel-Lucent 9952

WPS release-specific (release-applicable and release-dependent).

Version 1.0 Alcatel-Lucent 9952 WPS Excel spreadsheet input files cannot be usedwith

the Version 2.0 Alcatel-Lucent 9952 WPS.

Likewise, the Version 2.0 Alcatel-Lucent 9952 WPS Excel spreadsheet input files are not

backwards compatible with the Version 1.0 Alcatel-Lucent 9952 WPS.

Figure 1-1 Bulk operations workflow

Bulk operations overview Bulk operations description

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



1-3

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

18/58

Bulk operations GUI

Bulk operations main menu

Figure 1-2, Bulk operations menu on the main window (p. 1-4) shows the list ofBulk

operations available on the Alcatel-Lucent 9952 WPS main window.

Figure 1-2 Bulk operations menu on the main window

Bulk operations overview Bulk operations GUI

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

19/58

Bulk operations menu items

The following Bulk operations are available from the Alcatel-Lucent 9952 WPS main

window:

Multi ENodeB Cloning (from LA5.0.0) - Enables cloning from one or more existing

eNodeBs.

Multiple Lte To Lte Neighboring Plan Rebuild (from LA5.0) - Deletes existing

LTE-to-LTE neighboring for a set of eNodeB equipment and rebuilds the neighboring

links based on the spreadsheet input.

Multiple Lte To Lte Neighboring Plan Update (from LA5.0) - Updates and adds

LTE-to-LTE neighboring for a set of eNodeB equipment.

Multiple Lte To OneXRtt Neighboring Plan Rebuild (from LA5.0) - Deletes existing

LTE-to-OneXRtt neighboring for a set of eNodeB equipment and rebuilds the

neighboring links based on the spreadsheet input.

Multiple Lte To OneXRtt Neighboring Plan Update (from LA5.0) - Updates and

adds LTE-to-OneXRtt neighboring for a set of eNodeB equipment.

Multiple Cell PCI Configuration (from LA4.0.1) - Configures the physical cell

identity (PCI) for a cluster of cells ( LteCell objects).

Multiple Enb IP Address Migration (up to TLA5.x and before LA4.0.1) - Updates

the virtual local area network (VLAN) configuration type and Internet Protocol (IP)

addresses for multiple eNodeBs. This bulk operation can be used to migrate the IP

addresses for multiple eNodeBs from IPv4 to IPv6 format and can also optionally

change the Mobility Management Entity (MME) IP address for the eNodeB S1 links.

Multiple Initial ANR List Creation (for LA4.0.1) - Creates the initial automatic

neighbor relation (ANR) lists for a cluster of cells ( LteCell objects).

Multiple Initial ANR List Creation (for LA5.0.0) - Creates the initial automaticneighbor relation (ANR) lists for a cluster of cells ( LteCell objects).

Multiple Interface Creation (from LA4.0.1) - Creates multiple interfaces for a

cluster of eNodeBs with all of their respective S1 and X2 links.

Multiple Interface Deletion (from LA4.0.1) - Deletes multiple interfaces (S1 and X2

links) for a cluster of eNodeBs.

Multiple Lte To Gsm Neighboring Plan Rebuild (from LA5.0) - Deletes existing

LTE-to-GSM neighboring for a set of eNodeB equipment and rebuilds the

neighboring links based on the spreadsheet input.

Multiple Lte To Gsm Neighboring Plan Update (from LA5.0) - Updates and adds

LTE-to-GSM neighboring for a set of eNodeB equipment. Multiple Lte To Hrpd Neighboring Plan Rebuild (from LA5.0) - Deletes existing

LTE-to-HRPD (High Rate Packet Data) neighboring for a set of eNodeB equipment

and rebuilds the neighboring links based on the spreadsheet input.

Multiple Lte To Hrpd Neighboring Plan Update (from LA5.0) - Updates and adds

LTE-to-HRPD neighboring for a set of eNodeB equipment.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



1-5

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

20/58

Multiple Lte To Utran Fdd Neighboring Plan Rebuild (from LA5.0) - Deletes

existing LTE-to-Utran Fdd neighboring for a set of eNodeB equipment and rebuilds

the neighboring links based on the spreadsheet input.

Multiple Lte To Utran Fdd Neighboring Plan Update (from LA5.0) - Updates and

adds LTE-to-Utran Fdd neighboring for a set of eNodeB equipment.

Multiple Lte To Utran Tdd Neighboring Plan Rebuild (from LA5.0) - Deletesexisting LTE-to-Utran Tdd neighboring for a set of eNodeB equipment and rebuilds

the neighboring links based on the spreadsheet input.

Multiple Lte To Utran Tdd Neighboring Plan Update (from LA5.0) - Updates and

adds LTE-to-Utran Tdd neighboring for a set of eNodeB equipment.

Multiple Transport Configuration (from LA4.0.1) - Configures the transport and

VLAN configuration type and IP addresses for a cluster of eNodeBs. This bulk

operation can be used to migrate the IP addresses for a cluster of eNodeBs from IPv4

to IPv6 format and can also optionally change the MME IP address for the eNodeB S1

links.

Multiple eNodeB Creation (for LA4.0.1) - Creates multiple eNodeBs with all of theirrespective cells ( LteCell objects).

Multiple eNodeB Creation (up to TLA5.x and before LA4.0.1) - Creates multiple

eNodeBs with all of their respective cells, S1, and X2 links.

Each step of the bulk operation procedure and the operation-related messages such as

duration of operations, finding appropriate NEs in the Network, setting parameters,

neighboring relations, and so on, are stored in the log files.

Input files

Using templates

If you want to use a template to configure the LteCells but do not want to populate all of

the information in the spreadsheet input file, import the associated template and set it as

the default template. Do this before executing the operation.

Creating input files

Each bulk operation allows you to create an Microsoft Excel spreadsheet input file. The

spreadsheet file is called a workbook and each workbook contains one or more

worksheets, which are tabs across the bottom of the Excel window. When you enter thebulk information into the workbook, you then input that workbook into Alcatel-Lucent

9952 WPS for processing.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

21/58

When one of the operations is selected, the Alcatel-Lucent 9952 WPS opens a window to:

Select an input file for the bulk operation.

Generate a template of the input file for the bulk operation.

Cancel the bulk operation.

For example, the Multiple Cell PCI Configuration (from LA4.0.1) operation displays thefollowing screen.

Selecting the Generate button on the screen generates an Excel spreadsheet input file

with the proper worksheet and column headings for that specific operation.

After you save the template file, then edit the file to enter the appropriate configuration

parameters. Once the input file is compete, this same screen option is used to browse for

the Excel file and use it as input.

Location of sample files

After the successful installation of Alcatel-Lucent 9952 WPS, there are a few sample

workbooks installed in your local directory \\

user\samples\Bulk. Instead of generating input files, you can modify these sample

templates for the bulk operation scenarios.

Figure 1-3 Operation screen example

Bulk operations overview Input files

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



1-7

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

22/58

Format of sample files

For the Sample files, there are some basic tabs for each workbook, and then specific

tabs/worksheets for the specific type of workbook. The basic tabs include:

History - gives a history of the changes in the sample file.

About Readme - this tab provides color-coded legends to indicate conventions for the

mandatory and optional input data.

Functional_scope - briefly explains the scenario.

Guidelines - briefly shows the available configurations.

Scenario_Processing - briefly explains the actions performed.

The remaining tabs/worksheets differ, depending upon the bulk action.

Bulk operations overview Input files

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

23/58

Procedure 1-1: Generate a spreadsheet template

Purpose

This procedure describes how to generate a spreadsheet workbook file with all of the

proper worksheets and column headings for any of the bulk operations.

Steps

...................................................................................................................................................................................................

1 From the Alcatel-Lucent 9952 WPS main window, select the Network tab.

...................................................................................................................................................................................................

2 In the Object editor pane Overview tab, click the desired bulk operation.

Result:

A window is displayed, similar to this example ofMultiple Cell PCI Configuration(from LA4.0.1).

...................................................................................................................................................................................................

3 In the window, clickGenerate.

Bulk operations overview Procedure 1-1: Generate a spreadsheet template

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



1-9

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

24/58

Result: An Excel spreadsheet template file (workbook) is generated that contains the

related workbook.

...................................................................................................................................................................................................

4 In the Select a file for saving the template window that is displayed,

1. Navigate to the location on your local file system where you want to store thetemplate file.

2. Specify a file name in the File Name field for the template file.

3. Click the Save button to save the template file.

4. Once the file has been saved successfully, clickOKto end the save operation.

...................................................................................................................................................................................................

5 Manually fill out the workbook, using the information in the next chapter.

When the workbook is completed, use the next procedure to input the workbook.

Bulk operations overview Procedure 1-1: Generate a spreadsheet template

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




EN D O F S T E P S

...................................................................................................................................................................................................

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

25/58

Procedure 1-2: Import a bulk workbook

Purpose

This procedure describes how to import and process a bulk workbook.

Before you begin

If you want to configure the LteCells with templates, import the templates and set the

default templates before executing this procedure.

Steps

...................................................................................................................................................................................................

1 Verify that the spreadsheet input file (workbook) is stored locally or accessible from the

Alcatel-Lucent 9952 WPS.

...................................................................................................................................................................................................

2 If desired, create and save a bulk operation check profile to be included with the

operation.

The check profile name must be the same name as the bulk operation.

...................................................................................................................................................................................................

3 From the Alcatel-Lucent 9952 WPS main window, select the Network tab.

...................................................................................................................................................................................................

4 In the Overview tab in the working area, click the desired bulk operation.

Bulk operations overview Procedure 1-2: Import a bulk workbook

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



1-11

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

26/58

Result:

A window is displayed, similar to this example ofMultiple Cell PCI Configuration(from LA4.0.1).

...................................................................................................................................................................................................

5 Enter the input file path and file name or use the Browse button to select the input file

for the bulk operation.

...................................................................................................................................................................................................

6 ClickOKto start the operation.

Result: A report window displays the results.

The report displays the following data in tabular format:

Index - Index number for each step in the bulk operation.

Severity - Graphical indication of the type or severity of each message.

Step - Numerical identifier for each step involved in the bulk operation.

Message - Provides error, warning, and information messages, if any.

Command - Displays the command corresponding to each operation.

Parameter - Displays the object parameters, if any.

Object - Displays the network object for which the specific command is launched....................................................................................................................................................................................................

7 If the results of the operation needs to be saved, click the Save Report button.

...................................................................................................................................................................................................

8 When finished with the import, click Close.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

27/58

...................................................................................................................................................................................................

9 Verify that the desired action has been configured in the network.


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



1-13

E N D O F S T E P S...................................................................................................................................................................................................

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

28/58


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

29/58

2 2Bulk operation scenarios

Spreadsheet input file format

Purpose

The generated spreadsheet files (workbooks) have worksheets with predefined column

headings. These columns correspond with parameters from the Alcatel-Lucent Long TermEvolution (LTE) Radio Access Network (RAN), Alcatel-Lucent 9412 eNodeB, FDD

Parameters Reference Guide, 418-000-032.

This chapter provides a list of the worksheets for each of the generated workbooks.

Contents

Multi ENodeB Cloning (from LA5.0.0) 2-2

Multiple Lte To Lte Neighboring Plan Rebuild and Update (from LA5.0.0) 2-2

Multiple Lte To OneXRtt Neighboring Plan Rebuild and Update (from LA5.0) 2-3

Multiple Cell PCI Configuration (from LA4.0.1) 2-4

Multiple Enb IPAddress Migration (up to TLA5.x and before LA4.0.1) 2-4

Multiple Initial ANR List Creation (for LA4.0.1) 2-6

Multiple Initial ANR List Creation (for LA5.0.0) 2-7

Multiple Interface Creation (from LA4.0.1) 2-7

Multiple Interface Deletion (from LA4.0.1) 2-9

Multiple Lte To Gsm Neighboring Plan Rebuild and Update (from LA5.0) 2-11

Multiple Lte To Hrpd Neighboring Plan Rebuild and Update (from LA5.0) 2-11Multiple Lte To Utran Fdd Neighboring Plan Rebuild and Update (from LA5.0) 2-12

Multiple Lte To Utran Tdd Neighboring Plan Rebuild and Update (from LA5.0) 2-13

Multiple Transport Configuration (from LA4.0.1) 2-13

Multiple eNodeB Creation (for LA4.0.1) 2-16

...................................................................................................................................................................................................................................



2-1

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

30/58

Multiple eNodeB Creation (up to TLA5.x and before LA4.0.1) 2-18

Multi ENodeB Cloning (from LA5.0.0)

Workbook information

Important! When using the generated workbook template, ensure that the worksheet

names and the column header names are not changed.

Worksheets

The Multi ENodeB Cloning (from LA5.0.0) workbook has the following worksheets:

ENB (from ENB)

The source eNodeB to be cloned from.

ENB.CellsOne row for each eNodeB LteCell to be configured.

ENB (from TPL)

The source eNodeB template to be cloned from.

Modify cells

One row for each eNodeB LteCell to be configured.

Multiple Lte To Lte Neighboring Plan Rebuild and Update(from LA5.0.0)




These bulk operations allows you to:

Rebuild: This scenario deletes all the LTE-to-LTE neighboring links and then adds

the new links

Update: This scenario enables you to selectively delete LTE-to-LTE neighboring

links, then update exiting links and add new links.

Worksheets

The Lte To Lte Neighboring Plan Rebuild workbook has the following worksheets:

ENB

Add Nei

Bulk operation scenarios Spreadsheet input file format

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

31/58

The Lte To Lte Neighboring Plan Update workbook has the following worksheets:

ENB

Delete Nei

Update Nei

Add Nei

Multiple Lte To OneXRtt Neighboring Plan Rebuild and Update(from LA5.0)




These bulk operations allows you to: Rebuild: This scenario deletes all the LTE-to-CDMA2000 radio access technologies

(RATs) neighboring links and then adds the new links

Update: This scenario enables you to selectively delete LTE-to-CDMA2000 RAT

neighboring links, then update exiting links and add new links.

Worksheets

The Lte To OneXRtt Neighboring Plan Rebuild workbook has the following

worksheets:

ENB Add Nei

The Lte To OneXRtt Neighboring Plan Update workbook has the following

worksheets:

ENB

Delete Nei

Update Nei

Add Nei

Bulk operation scenarios Multiple Lte To Lte Neighboring Plan Rebuild and Update(from LA5.0.0)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-3

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

32/58

Multiple Cell PCI Configuration (from LA4.0.1)




Worksheets

The Multiple Cell PCI Configuration (from LA4.0.1) workbook has the following

worksheets:

ENB

One row for each eNodeB to be configured.

PCI

One row for each eNodeB LteCell to be configured. If multiple LteCells are to beconfigured for a single eNodeB, add one row for each LteCell using the same

ENBEquipment.uniqueName value and unique LteCell.uniqueName values.

Multiple Enb IP Address Migration (up to TLA5.x and beforeLA4.0.1)


The Multiple Enb IP Address Migration (up to TLA5.x and before LA4.0.1) operation

supports the following scenario on a set of eNodeBs (up to 100):

Modify the VLAN configuration type

For each VLAN, migrate the telecom (S1 and X2) IP address or OAM IP address

from IPv4 to IPv6

For the S1 links, migrate the MME IP address from IPv4 to IPv6

Worksheet

The workbook contains the following worksheets:

ENB

ENBConf.TrafficDescriptor

One row for each eNodeB Traffic Descriptor to be updated. If multiple TrafficDescriptors are to be updated for a single eNodeB, add one row for each TrafficDescriptor using the same ENBEquipment.uniqueName value and uniqueTrafficDescriptor.index values.

ENBConf.VLAN

Bulk operation scenarios Multiple Cell PCI Configuration (from LA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

33/58

One row for each eNodeB VLAN to be updated. If multiple VLANs are to be updatedfor a single eNodeB, add one row for each VLAN using the same ENBEquipment.u-niqueName value and unique VLAN.rdnId values.

ENBConf.IPsecTunnel

One row for each eNodeB IPsec Tunnel to be updated.. If multiple IPsec Tunnels are

to be updated for a single eNodeB, add one row for each IPsec Tunnel using the sameENBEquipment.uniqueName value and unique VLAN.rdnId values.

ENBConf.IPsecPolicy

One row for each eNodeB IPsec Policy to be updated. If multiple IPsec Policies are tobe updated for a single eNodeB, add one row for each IPsec Policy using the sameENBEquipment.uniqueName value and unique TrafficDescriptor.index values.

S1.data

One row for each eNodeB S1 link to be modified. If multiple S1 links are to beupdated for a single eNodeB, add one row for each S1 link using the sameENBEquipment.uniqueName value and unique MME Access Unique Namevalues.

Worksheet usage

The following table shows what worksheets are required or optional depending on the

configuration task:

Table 2-1 Enb IP Address Migration worksheet usage

Worksheet Possible configuration tasks

Configure VLAN

(with IPsec)

Configure VLAN

(no IPsec)

ENB Required Required

ENBConf.TrafficDescriptor Required Required

ENBConf.VLAN Optional Optional

ENBConf.IPsecTunnel Required

ENBConf.IPsecPolicy Required

S1.data Required Required

Bulk operation scenarios Multiple Enb IP Address Migration (up to TLA5.x and beforeLA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-5

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

34/58

The following table shows the configuration task order for the Multiple Enb IP Address

Migration (up to TLA5.x and before LA4.0.1) operation and the required worksheets for

each task:

Configuration task order Worksheet

ENB

ENBConf.

VLAN

ENBConf.

TrafficDescriptor

ENBConf.

IPsecTunnel

ENBConf.

IPsecPolicy

S1

.data

Modify eNodeB Required

Configure VLAN Required Required Required Required

Modify S1 link Required

Notes:

1. The configuration tasks are executed in sequence (from top to bottom as they are listed in

the table) and for each task, each eNodeB configuration is updated in sequence.

2. A task may be skipped if the operation is not applicable to a particular eNodeB, the

operation is not available, or the input data is inconsistent.

Multiple Initial ANR List Creation (for LA4.0.1)




Worksheets

The Multiple Initial ANR List Creation (for LA4.0.1) workbook has the following

worksheet:

ANR

One row for each eNodeB LteCell to be configured. If multiple LteCells are to be

configured for a single eNodeB, add one row for each LteCell using the sameENBEquipment.uniqueName value and unique LteCell.uniqueName values.

Bulk operation scenarios Multiple Enb IP Address Migration (up to TLA5.x and beforeLA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

35/58

Multiple Initial ANR List Creation (for LA5.0.0)




Worksheets

The Multiple Initial ANR List Creation (for LA5.0.0) workbook has the following

worksheets:

ENB


ANR

One row for each eNodeB LteCell to be configured. If multiple LteCells are to beconfigured for a single eNodeB, add one row for each LteCell using the same

ENBEquipment.uniqueName value and unique LteCell.uniqueName values.

Multiple Interface Creation (from LA4.0.1)




The Multiple Interface Creation (from LA4.0.1) operation supports the following

scenario on a set of eNodeBs: Create S1 links for every eNodeB

Create X2 links for every eNodeB

Worksheets

The Multiple Interface Creation (from LA4.0.1) workbook has the following worksheets:

S1

One row for each eNodeB LteCell to be configured If multiple LteCells are to beconfigured for a single eNodeB, add one row for each LteCell using the sameENBEquipment.uniqueName value and unique LteCell.uniqueName values.

S1.data

One row for each S1 link to be created. If multiple S1 links are to be created for asingle eNodeB, add one row for each S1 link using the same ENBEquipment.u-niqueName value and unique MME Access Unique Name values.

X2

Bulk operation scenarios Multiple Initial ANR List Creation (for LA5.0.0)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-7

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

36/58

One row for each eNodeB X2 link to be created. If multiple X2 links are to be createdfor a single eNodeB, add one row for each X2 link using the same ENBEquipmen-t.uniqueName value.

X2.data

One row for each eNodeB X2 link to be created. If multiple X2 links are to be created

for a single eNodeB, add one row for each X2 link using the same ENBEquipmen-t.uniqueName value and unique Target eNodeB Unique Name values.

Worksheet usage


configuration task:

Table 2-2 Multiple Interface Creation worksheet usage


CreateS1lin

ks

CreateX2lin

ks

S1 R

S1.data R

X2 R

X2.data R

Notes:

1. R = Required, O = Optional

The following table shows the configuration task order for the Multiple Interface

Creation (from LA4.0.1) operation and the required worksheets for each task:


S1

S1

.data

X

2

X

2.d

ata

Create S1 link R R

Create X2 link R R

Bulk operation scenarios Multiple Interface Creation (from LA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

37/58

Notes:

1. R = Required

2. The configuration tasks are executed in sequence (from top to bottom as they are listed in the table) and for

each task, each eNodeB configuration is updated in sequence.

3. A task may be skipped if the operation is not applicable to a particular eNodeB, the operation is not

available, or the input data is inconsistent.

Multiple Interface Deletion (from LA4.0.1)




This bulk operation allows you to delete multiple interfaces for a cluster of eNodeBs

simultaneously.

The Multiple Interface Deletion (from LA4.0.1) operation supports the following

scenario on a set of eNodeBs:

Delete S1 links for every eNodeB

Delete X2 links for every eNodeB

Note: Templates used for S1 or X2 link deletion should be imported and set as the

default template for that object type before executing the Multiple Interface Deletion

(from LA4.0.1) operation.

Worksheets

The Multiple Interface Deletion (from LA4.0.1) workbook has the following

worksheets:

S1

One row for each S1 link to be deleted.

X2

One row for each eNodeB X2 link to be deleted. If multiple X2 links are to be deletedfor a single eNodeB, add one row for each X2 link using the same ENBEquipmen-t.uniqueName value.

Worksheet usage


configuration task:

Bulk operation scenarios Multiple Interface Creation (from LA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-9

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

38/58

Table 2-3 Multiple Interface Deletion worksheet usage


DeleteS1

links

DeleteX2

links

S1 R

X2 R

Notes:


The following table shows the configuration task order for the Multiple Interface

Deletion (from LA4.0.1) operation and the required worksheets for each task:


S1

X2

Delete S1 link R

Delete X2 link R

Notes:

1. R = Required





Bulk operation scenarios Multiple Interface Deletion (from LA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

39/58

Multiple Lte To Gsm Neighboring Plan Rebuild and Update(from LA5.0)


Important! When using the generated workbook template, ensure that the worksheetnames and the column header names are not changed.


Rebuild: This scenario deletes all the LTE-to-GSM neighboring links and then

adds the new links

Update: This scenario enables you to selectively delete LTE-to-GSM neighboring


Worksheets

The Lte To Gsm Neighboring Plan Rebuild workbook has the following worksheets: ENB

Add Nei

The Lte To Gsm Neighboring Plan Update workbook has the following worksheets:

ENB

Delete Nei

Update Nei

Add Nei

Multiple Lte To Hrpd Neighboring Plan Rebuild and Update(from LA5.0)





Rebuild: This scenario deletes all the LTE-to-HRPD (high rate packet data)neighboring links and then adds the new links

Update: This scenario enables you to selectively delete LTE-to-HRPD neighboring


Bulk operation scenarios Multiple Lte To Gsm Neighboring Plan Rebuild and Update(from LA5.0)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-11

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

40/58

Worksheets

The Lte To Hrpd Neighboring Plan Rebuild workbook has the following worksheets:

ENB

Add Nei

The Lte To Hrpd Neighboring Plan Update workbook has the following worksheets: ENB

Delete Nei

Update Nei

Add Nei

Multiple Lte To Utran Fdd Neighboring Plan Rebuild andUpdate (from LA5.0)





Rebuild: This scenario deletes all the LTE-to-Utran Fdd neighboring links and then

adds the new links

Update: This scenario enables you to selectively delete LTE-to-Utran Fdd


Worksheets

The Lte To Utran Fdd Neighboring Plan Rebuild workbook has the following

worksheets:

ENB

Add Nei

The Lte To Utran Fdd Neighboring Plan Update workbook has the following

worksheets:

ENB

Delete Nei

Update Nei

Add Nei

Bulk operation scenarios Multiple Lte To Hrpd Neighboring Plan Rebuild and Update(from LA5.0)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

41/58

Multiple Lte To Utran Tdd Neighboring Plan Rebuild andUpdate (from LA5.0)


Important! When using the generated workbook template, ensure that the worksheetnames and the column header names are not changed.


Rebuild: This scenario deletes all the LTE-to-Utran Tdd neighboring links and then

adds the new links

Update: This scenario enables you to selectively delete LTE-to-Utran Tdd


Worksheets

The Lte To Utran Tdd Neighboring Plan Rebuild workbook has the followingworksheets:

ENB

Add Nei

The Lte To Utran Tdd Neighboring Plan Update workbook has the following

worksheets:

ENB

Delete Nei

Update Nei

Add Nei

Multiple Transport Configuration (from LA4.0.1)




This bulk operation allows you to configure transport and virtual local area network

(VLAN) parameters, create S1 links, and create X2 links for a cluster of eNodeBssimultaneously.

Bulk operation scenarios Multiple Lte To Utran Tdd Neighboring Plan Rebuild andUpdate (from LA5.0)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-13

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

42/58

The Multiple Transport Configuration (from LA4.0.1) operation supports the following


IP migration, including:

For each VLAN, migrate the telecom IP address or OAM IP address from IPv4 to

IPv6 or IPv6 to IPv4, and modify the VLAN configuration type accordingly

For each S1 link, migrate the MME IP address from IPv4 to IPv6 or IPv6 to IPv4

For each VLAN, update the telecom IP address or OAM IP address, but not

modify the VLAN configuration type

IP address update, including:

Update the VLAN IP address without modifying the IP format

Update the MME IP address without modifying the IP format

Worksheets

The Multiple Transport Configuration (from LA4.0.1) workbook has the following

worksheets:

ENBConf.Transport

One row for each eNodeB transport VLAN to be configured.

ENBConf.PerOperatorTransport

One row for each eNodeB VLAN to be configured.

ENBConf.VLAN

One row for each eNodeB VLAN to be created. If multiple VLANs are desired for asingle eNodeB, add one row for each VLAN using the same ENBEquipment.u-niqueName value and unique VLAN.rdnId values.

ENBConf.TrafficDescriptorOne row for each eNodeB Traffic Descriptor to be created. If multiple TrafficDescriptors are desired for a single eNodeB, add one row for each Traffic Descriptorusing the same ENBEquipment.uniqueName value and unique TrafficDescrip-tor.index values.

ENBConf.IPsecTunnel

One row for each eNodeB VLAN that will support an IPsec Tunnel. If multiple IPsecTunnels are to be created for a single eNodeB, add one row for each VLAN that willsupport an IPsec Tunnel using the same ENBEquipment.uniqueName value andunique IPsecTunnel.index values.

ENBConf.IPsecPolicy

One row for each eNodeB TrafficDescriptor.index that has an IPsec tunnel definedon its parent VLAN. If multiple IPsec Policies are to be created for a single eNodeB,add one row for each TrafficDescriptor.index that has an IPsec tunnel defined on itsparent VLAN using the same ENBEquipment.uniqueName value and uniqueTrafficDescriptor.index values.

S1.Template

Bulk operation scenarios Multiple Transport Configuration (from LA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

43/58

One row for each eNodeB to be created.

S1.Data

One row for each eNodeB S1 link to be created. If multiple S1 links are to be createdfor a single eNodeB, add one row for each S1 link using the same ENBEquipment.u-niqueName value and unique MME Access Unique Name values.

Worksheet usage


configuration task:

Table 2-4 Multiple Transport Configuration (from LA4.0.1) worksheet usage


CreateTransportorVLAN

IPmigration

withoutIPsec

IPmigration

withIPsec

UpdateIP

addressonly

ENBConf.Transport R R R O

ENBConf.PerOperatorTransport R R R O

ENBConf.VLAN R O O O

ENBConf.TrafficDescriptor R R R R

ENBConf.IPsecTunnel O R O

ENBConf.IPsecPolicy O R O

S1.Template O O R O

S1.data O O R O

Notes:


The following table shows the configuration task order for the Multiple Transport

Configuration (from LA4.0.1) operation and the required worksheets for each task:


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-15

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

44/58


ENBConf.Transport

ENBConf.PerOperatorT

ransport

ENBConf.VLAN

ENBConf.TrafficDescriptor

ENBConf.IPsecTunnel

ENBConf.IPsecPolicy

S1

.Template

S1

.data

Configure eNodeB Transport R R

Configure VLAN R R R R

Modify S1 link R R

Notes:

1. R = Required





Multiple eNodeB Creation (for LA4.0.1)




The Multiple eNodeB Creation (for LA4.0.1) operation supports the following


Create eNodeBs with necessary parameters

Create LteCells for every eNodeB

Worksheets

The Multiple eNodeB Creation (for LA4.0.1) workbook has the following worksheets:

ENB


....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

45/58


ENB General Conf

ENB.Cells

One row for each eNodeB.

ENB.Cells.Data

One row for each eNodeB LteCell to be created. If multiple LteCells are to be createdfor a single eNodeB, add one row for each LteCell using the same ENBEquipmen-t.uniqueName value and unique LteCell.rdnId values.

Cell General Conf

Worksheet usage


configuration task:

Table 2-5 Multiple eNodeB Creation (for LA4.0.1) worksheet usage


CreateeNodeBonly

CreateLteCells

ENB R O

ENB.Cells R

ENB.Cells.Data R

Notes:


The following table shows the configuration task order for the Multiple eNodeB Creation

(for LA4.0.1) operation and the required worksheets for each task:

Bulk operation scenarios Multiple eNodeB Creation (for LA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................



2-17

8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

46/58


ENB

ENB

.C

ells

ENB

.C

ells.D

ata

Create a new eNodeB R

Create LteCells R R

Notes:

1. R = Required



3. A task may be skipped if the operation is not applicable to a particular eNodeB, the operation is notavailable, or the input data is inconsistent.

Multiple eNodeB Creation (up to TLA5.x and before LA4.0.1)




This bulk operation allows you to create multiple eNodeBs simultaneously with all oftheir respective cells, S1, and X2 links.

The Multiple eNodeB Creation (up to TLA5.x and before LA4.0.1) operation

supports the following scenario on a set of eNodeBs:

Create eNodeBs with necessary parameters

Configure VLAN and IPsec information for each eNodeB

Create LteCells for every eNodeB

Configure the PCI for LteCells

Create initial neighboring relationships for LteCells (using the automatic neighbor

relation (ANR) option on the Alcatel-Lucent 9952 WPS)

Create S1 links for every eNodeB

Create X2 links for every eNodeB

Bulk operation scenarios Multiple eNodeB Creation (for LA4.0.1)

....................................................................................................................................................................................................................................

....................................................................................................................................................................................................................................




8/22/2019 WPSv2.0.10-9YZ-05134-0204-PCZZA

47/58

Worksheets

The Multiple eNodeB Creation (up to TLA5.x and before LA4.0.1) workbook has the

following worksheets:

ENB


ENBConf.VLAN

One row for each eNodeB VLAN to be created. If multiple VLANs are desired for asingle eNodeB, add one row for each VLAN using the same ENBEquipment.u-niqueName value and unique VLAN.rdnId values.

Date post:	08-Aug-2018
Category:	Documents
Upload:	dashdunga
View:	215 times
Download:	0 times

WPSv2.0.10-9YZ-05134-0204-PCZZA

Documents