MyEquipAuctions.comINDUSTRIAL DIVISION

October 28, 2019

KD Capital Auctions, LLC.7918 E. McClain Drive #101 | Scottsdale, AZ 85260

480-455-3910 | service@kdauctions.com

KD Capital Auctions, LLC.7918 E. McClain Drive #101 | Scottsdale, AZ 85260

480-455-3910 | service@kdauctions.com

ONLINE ONLY AUCTIONInjection Molding / Medical Device

Manufacturing Plant30+ Injection Machines (55-400 Ton)

Featured Items: International Medical Device Manufacturer!!!!! Entire Tempe, AZ Location, Super Clean & Very Well Maintained Injection Molding Machinery, CNC Machine Tools, Tooling & Workholding, Complete Clean Room, High End Tool & Die Department, Material Handling/

Warehousing, Insection Equipment & More!!!!!

Inspection/Preview: Monday, November 11th • 10:00 AM - 3:00 PM (PST)Lots Begin Closing: Tuesday, November 12th • 9:00 AM (PST)Inspection Location: 405 West Geneva Dr. Tempe, AZ 85282

2 • October 28, 2018 • www.myequipauctions.com

ONLINEEAST

P.O. Box 209 • Portersville, PA 16051Phone: 724-368-9788 • Fax: 724-368-9839

Cell: 724-713-6394info@hartlandmachinery.com

LIC# AU-002918-L

FOR COMPLETE DETAILS PLEASE VISIT:

www.hartlandmachinery.comHARTLAND MACHINERY AUCTIONEERS

®

Wolfe Metal Fab, Inc.299 Greensburg Road • Lower Burrell, PA

Sat., November 16th • 10:00 AM

METAL FABRICATION SHOP

AUCTION

• Shears • Press Brakes • Other Fabricating Equipment • Saws •

Welders • Paint & Powder Coating Equipment • Machine Shop

Equipment • Air Compressors • Threaders • Rolling Stock • Mowers • Woodworking Equipment • & More

MachineryAUCTION

Wed., November 20 • 10 AM ESTAlbert Paley Studios • Rochester, NY

Swedging Blocks and Tools; Ring Roller with Sizers; 8,000# Caterpillar Forklift; 70 Ton Bulldozer; 3-4 hp

Pneumatic Handheld Grinders; Wrought Iron and Cast Iron Anvils; Welders; Acorn Plates; Mill; Saws; Bridge Cranes; Rollers; Forklifts; Drill; Racking; Newer Office Furniture; Heat Treat; Blacksmith Tools; Drop Hammer;

Fasteners; Rolls; JLG 8000# Telehandler; Hard to Find and RARE Tools

Plus Much More!

585-381-1710 ONSITE & ONLINE PUBLIC AUCTIONwww.steevesco.cominfo@steevesco.com

Late Model Robots & Support Parts Auction Tuesday, November 12th • 1 PMLOCATION: Grand Rapids, Michigan and Almont, Michigan

Appointments for inspections are available upon request, 8am-5pm M-F for each location. Please call 616-745-5953 or email eric@btmindustrial.com to schedule an inspection.

Auction House Address:3366 Kraft Ave SE Grand Rapids, MI 49512Phone: 616-540-1279Email: Eric@BTMIndustrial.comwww.BTMIndustrial.com

FEATURING: Fanuc/Motoman/Mitsubishi Robots and MRO Support Parts

2000 Motoman UP6 Robot w/ XRC 2001 Control

2008 Fanuc M-430iA 2F Robot w/R-30iA Controller I Pendant

2006 FANUC R2000iA/200FO 6 AXIS CNC ROBOT W/RJ3IB CONTROLS

2010 Fanuc M-420iA Robot Arm w/ R-30iA Control

Fanuc R30iA & Rj3ib, Yaskawa Motoman MRO Support Parts

Large selection of Fanuc R30iA / Rj3iB and Yaskawa (Motoman) parts to support

the robots and the controllers in this sale. Drives, Amps, Boards, Motors, Teach

Pendants, and MORE!

FANUC A06B-6107-H007 SERVO AMPLIFIER

FANUC A05B-2518-C200#EMH TEACH PENDANT

Have Robots to Sell?

Contact Us Today!

www.myequipauctions.com • October 28, 2019 • 3

ONLINE

COLT 7 CORPORATION - ONLINE AUCTIONSTARTING: NOVEMBER 9th

LOTS BEGIN ENDING: NOVEMBER 12th • 11:00 AM34859 GROESBECK HWY • CLINTON TWP, MI 48035

INSPECTION: NOVEMBER 11th • 9:00 AM – 5:00 PM

SALE CONDUCTED BY R. J. MONTGOMERY & ASSOCIATES

695 AMELIA ST., PLYMOUTH, MICHIGAN 48170 • PHONE: (734) 459-2323 • FAX: (734) 459-2524 MUCH MORE INFORMATION & PHOTOS AT OUR WEBSITE:

www.rjmauctions.com

VISIT www.rjmauctions.com FOR ALL INFO, PHOTOS & TO BID

DEVLIEG JIG MILLSDEVLIEG MODEL 4H-120 JIG MILL, S/N 8271, SONY 3 AXIS DIGITAL READOUT, UP TO 1000 RPM, 120” X 40” T-SLOTTED TABLEDEVLIEG MODEL 54K-96 SPIRAMATIC JIG MILL, S/N 9/14267, 96” X 40” T-SLOTTED TABLE, GE MARK CENTURY W/ MB3 BACK-UPDEVLIEG MODEL 4K-96 JIG MILL, S/N 9604, 96” X 40” T-SLOTTED TABLE, 4” SPINDLE3) DEVLIEG MODEL 4K-72 JIG MILLS, 72” X 40” TABLE, 1450 RPM, W/ ACU-RITE 3 AXIS DIGITAL READOUT, S/N 9233, S/N 9482 (W/ AUTOCON CONTROL) & S/N 10089 (W/ DIALTROL V CONTROL) DEVLIEG MODEL 3H-48 JIG MILL, S/N 8338, W/ ANILAM WIZARD 450 3 AXIS DIGITAL READOUT, 48” X 35” T-SLOTTED TABLE

DEVLIEG MACHINE ACCESSORIESDEVLIEG ROTARY AIR TABLES, 60” X 40”, 50” X 40”, 30” X 30” & 2) 26” X 26”DEVLIEG T-SLOT ANGLE TABLES, 21” X 18” & 20” X 16”DEVLIEG T-SLOT E-TABLES, 60” X 40” X 5”, 40” X 30” X 5” & 40” X 40” X 5”

SAWSPEERLESS MODEL HB-812A HORIZONTAL METAL CUTTING BAND SAW, S/N 110, W/ POWER FEEDGLOBAL CUT OFF SAW

AIR COMPRESSORSLEROI MODEL CL20CUB ROTARY AIR COMPRESSOR, 20 HPLEROI MODEL W30SSBAH 30 HP ROTARY AIR COMPRESSOR, S/N 4240X286, NOT IN SERVICE

FORK LIFT TRUCKTOYOTA MODEL FGC45 10,000# CAPACITY FORK LIFT TRUCK, S/N 10922, DUAL MAST, SIDE SHIFT, PROPANE, 130” LIFT

STAKE TRUCK2011 FORD F350 SUPER DUTY 4X4 9’ SINGLE AXLE STAKE TRUCK, V/N 1FTRF3B60BEA98011, 82,411 MILES

PLOWBUYERS SNOW DOGG EX80, 8’ STAINLESS STEEL & METAL PLOW BLADE W/ PLOW HYDRAULICS & SNOW DOGG HT300 PAW’R PACK

MISCELLANEOUS MACHINERYSTORCH BOM-2C, 2,500# CAPACITY CRAIN MAGNET, S/N 1L-1004MILLER CP250SM CONSTANT POTENTIAL DC WELDER, W/ MILLER 22A WIRE FEED & GUN, S/N S4078232) 12” DISC SANDERS#2 ARBOR PRESSB&D DOUBLE END PEDESTAL GRINDERFLEXARM TAPPER W/ ARO PNEUMATIC DRILL

TOOLING: 50 TAPER TOOLING, DRILL BITS, END MILLS, REAMERS, COUNTER BORES, TAPS & DIES, SPADE DRILLS, QUICK CHANGE TOOLING, DRILL CHUCKS, KEYWAY CUTTERS, HIGH SPEED TOOLING, CARBIDE INSERT HOLDERS, BORING BARS, COLLETS, HOLD DOWN TOOLING, DRILL INDEXES, DRILL CABINETS, WELDING WIRE, NEWS 12” ROTARY TABLE, 15” ROTARY TABLE, 8” SUPER SPACER CHUCK, ANGLE & MACHINE VISES, ADJUSTABLE T-SLOT TABLE, RADIUS DRESSER, ANGLES (48” X 12”, 40” X 4”, 40” X 10”, 6’ X 20”, 47” X 15”, 41” X 11” & ASSORTED SMALLER SIZES)

INSPECTION: GAGE BLOCKS, SET-UP BLOCKS, TOGOSHISEKI INC HARDNESS TESTER, MICROMETERS, HEIGHT GAGES, MITUTOYO GAGES, PIN GAGES, BORE GAGES, HOLDRIDGE MODEL 4-S RADII-CUTTER, SINE PLATES, V-BLOCKS, BROWN & SHARPE MICRO-HITE 900 ELECTRONIC HEIGHT GAGE, GRANITE SURFACE PLATES (4’ X 3’ X 5”, 3’ X 2’ X 4” & 3’ X 2’ X 6”)

SHOP EQUIPMENT: VIDMAR MULTI-DRAWER CABINETS, KENNEDY MULTI-DRAWER CABINETS, HOMELITE 3100 PSI POWER WASHER, BENCHES, CABINETS, BENCHES W/ VIS-ES, STEEL LAYOUT TABLES, AIR & POWER TOOLS, HAND TOOLS, STAMPS, TOOL BOXES, HARDWARE, SHOP FANS, PALLET JACK, LADDERS, C-CLAMPS, QUICK CLAMPS, MACHINE CLAMPS, BANDING OUTFIT, SNAP-ON TOOL BOX, ACETYLENE OUTFIT, SHOP VAC, CHAINS

4 • October 28, 2019 • www.myequipauctions.com

ONLINE

www.myequipauctions.com • October 28, 2019 • 5

ONLINE

ONLINE PUBLIC AUCTIONAssets no longer required by LEAR TAYLOR Plant - Injection Molding Facility

LOTS START TO CLOSE: Thursday, November 7th • 1 pm (EDT)

26575 Northline Rd. • Taylor, MI 48180Inspection Dates: November 4th, 5th & 6th: 9 AM - 4 PM each day

Featuring: INJECTION MOLDING FACILITY, Tool Room, Cranes, Ancillary Equipment

90-Ton TOYO Model Ti-90G2 (2) AVAIL IMM • 150-Ton TOYO Model TM-150G (2) AVAIL IMM • 200-Ton Cincinnati CAMAC-Vel controls IMM • 300-Ton TOYO Model TM-300G2 - (2) AVAIL IMM • 300-Ton TOYO Model TM-300-H IMM • 440-Ton Toyo Model TM-400-G2 H30 IMM • 400-Ton TOYO Model 7M-400-G2 H30 IMM • MAGURE Loader Blender Grinder Unit • Multiple AEC Nelmor Grinder Granulators • Multiple Hopper Loaders CONAIR FRANKLIN • Multiple Dryers • Multiple Pick & Place Loaders • BRIDGEPORT 2 HP Mill • Saws • Pipe Threader • COLCHESTER Tool Room Lathe • Tool Room Equipment • Sanders • HARIG 6x12 Surface Grinder • Drills • Shop Press •

Welders • Ancillary Equipment, Surplus Dies, Shop Support • Cranes (9) Avail up to 5 Tons + Rails • Shelving • Trash CompactorOnline bidding only • 18% Buyers premium will be charged • No credit cards accepted, cash, certified check • Out of country bidders must have a 25% deposit on account to bid

90-Ton Toyomodel T1-90GS IMM

Conair Dryers model CD-30”s

200-Ton Cincinnati Milacron # UT-220-8 IMM

400-Ton Toyo 400 G z IMM

Asset Management GroupAppraisals, Liquidations, Auctions

313-499-6490 (P)313-839-9600 (F)

300-Ton Toyo TM-300-H IMM Many Granulators

amgrouponline.com • chip@amgrouponline.com

Bridgeport J HeadVertical Milling Machine

Magure Loader Grinder Unit

Online Bidding Powered By

Visit Us and Start Bidding Now!

COMPLETE NAAN/FLATBREAD BAKING PLANT MAKERS OF GLUTEN FREE RICE PATTIES

NOV6

NOV6

WhittierCA

West Sacramento

CA

COMPLETE GRAIN TERMINAL

NOV7

DEC11

Santa Ana CA

Portland OR

Recently operated by the Gourmet Indian Food Company (Gifco)• Flatbread Production Lines• Peerless Mixers & Bulk Flour System• Packaging Lines & Equipment

Formerly of Shinmei Foods USA• JetZone Oven• IQF Tunnel Freezer• Refrigeration Package• X-ray Inspection System• & Much More!

Formerly of Legendary Baking• Bakery Production Equipment• Ovens, Spiral Coolers & Conveyor• Process & Packaging Machinery• Factory Support Equipment

Leading Industrial And Commercial Liquidators. Contact Rabin Worldwide For Your Liquidation And Equipment Needs Today.

BAKERY PRODUCTION & PROCESS EQUIPMENT,PACKAGING MACHINES, PLUS FACTORY SUPPORT

Formerly owned and operated by Global Agriculture and Food Processing Company• Grain Cleaning Circuit• Dust Collection Systems• Conveyors & Elevators• Plant Electrical

6 • October 18, 2018 • www.myequipauctions.com

http://www.industrialmachinetrader.com/auctions/upcominghttp://www.industrialmachinetrader.com/auctions/upcoming

Auction Calendar

Click Here to Visit the