wurth wood group inventory guide - Wurth Wood Group Blog · PDF file• Grows throughout...

WURTH WOOD GROUP INVENTORY GUIDE

2 BRANCH HUBWURTH WOOD GROUP 1-877-GO-WURTH WWW.WURTHWOODGROUP.COM

HARDWOOD LUMBER

rough gradesurfaced two sides thickness

straight line ripped one edge

item no.

4/4 Superior 13/16” P 44ALD4/4 Superior 15/16” P 44ALD15165/4 Superior 1-3/16” P 54ALD8/4 Superior 1-15/16” P 84ALD4/4 Rustic rough 44RALDR4/4 Rustic 13/16” P 44RALD4/4 Rustic 15/16” P 44RALD1516



item no.

4/4 Selects & Better rough 44BWR4/4 Selects & Better 13/16” P 44BW

BASSWOOD

• Grows in the eastern half of the United States, principally in the North• Basswood machines well and is easy to work with hand tools making it a

premier carving wood• Basswood has creamy white or pale brown sapwood that merges gradually into

heartwood; heartwood is pale yellowish brown with occasional darker streaks• Soft and lightweight



item no.

4/4 Superior 13/16” P 44ESB4/4 Superior 15/16” P 44ESB1516

EUROPEAN BEECH

• Grows from southern Sweden to central Italy, France, England, and Spain• The sapwood is white with a red tinge; heartwood is light to dark reddish brown• Generally straight-grained with a close uniform texture• Heavy, hard, and strong• Offers good resistance to abrasive wear



item no.

4/4 FAS 1-Face & Better rough 44ASHR4/4 FAS 1-Face & Better 13/16” P 44ASH5/4 FAS 1-Face & Better rough 54ASHR8/4 FAS 1-Face & Better rough 84ASHR

ASH

• Ash grows throughout the entire eastern United States• Sapwood is light-colored to nearly white and the heartwood varies from greyish

or light brown, to pale yellow streaked with brown• Popular for food containers because the wood has no taste• Noted for stability - it is less subject to twist, warp and dimensional change than

most of our native hardwoods• Wood is generally straight-grained with a coarse uniform texture• Heavy, strong, hard and stiff



item no.

4/4 #1 Common 13/16” P 44ASPEN1C4/4 #1 Common 27/32” 44ASPEN1CNS

ASPEN

• Lumber is produced principally in the northeastern United States• Aspen does not split when nailed, it machines easily with a slightly fuzzy surface• The heartwood is grayish white to light grayish brown, sapwood is lighter

colored and merges gradually into the heartwood without being clearly marked• Usually straight grained with a fine, uniform texture• Lightweight, soft, generally low in strength

ALDER

• Grows along the Pacific coast between Alaska and California• A relative of birch, alder is almost white when freshly cut but quickly changes on

exposure to air, becoming light brown with a yellow or reddish tinge• Heartwood if formed only in trees of advanced age and there is no visible

boundary between heartwood and sapwood• The wood is fairly straight-grained with a uniform texture• Moderately light weight and intermediate in most strength properties

3BRANCH HUB WWW.WURTHWOODGROUP.COM 1-877-GO-WURTH WURTH WOOD GROUP

HARDWOOD LUMBER



item no.

4/4 Selects & Better rough 44BCHR4/4 Selects & Better 13/16” P 44BCH

BIRCH

• Grows in the eastern United States, principally in northern and Lake States south along the Appalachian Mountains

• White sapwood and light reddish-brown heartwood• Wood is generally straight-grained with a fine uniform texture• Heavy, strong, and hard



item no.

4/4 Selects & Better rough 44SPCEDARR4/4 Selects & Better 13/16” P 44SPCEDAR5/4 Selects & Better rough 54SPCEDARR6/4 Selects & Better rough 64SPCEDARR8/4 Selects & Better rough 84SPCEDARR10/4 Selects & Better rough 10SPCEDARR

SPANISH CEDAR

• Grows in tropical America from southern Mexico to northern Argentina• Although not high in strength, Spanish Cedar is considered decay resistant• One of only a few tropical species that are ring-porous• Heartwood varies from light to dark red-brown and sapwood is pinkish to white• Texture is rather fine and uniform to coarse and uneven; grain is not interlocked



item no.

4/4 Selects & Better rough 44CHR4/4 Selects & Better 13/16” P 44CH

4/4 FAS 1-Face & Better NORTHERN 13/16” P 44CHN

4/4 Selects & Better 7/8” P 44CH784/4 Selects & Better 15/16” P 44CH15165/4 Selects & Better rough 54CHR6/4 Selects & Better rough 64CHR8/4 Selects & Better rough 84CHR

CHERRY

• Grows from southeastern Canada throughout the eastern half of the United States; commercially in New York, Pennsylvania, Virginia, and West Virginia

• Heartwood varies from light to dark reddish brown and has a distinctive luster• White sapwood is narrow in old-growth trees and wider in second-growth trees• Uniform in texture, moderately heavy, strong, stiff, and moderately hard



item no.

4/4 FAS 1-Face & Better rough 44HICR4/4 FAS 1-Face & Better 13/16” P 44HIC

HICKORY

• Grows throughout the Middle and South Atlantic, and Central United States• Botanically true hickories and pecan hickories (fruit bearing) are split into two

groups; the wood however is virtually the same for both and is sold together• The sapwood is white or nearly white and relatively wide while the heartwood is

somewhat darker with reddish brown tones• Exceptionally tough, heavy, hard, and strong




item no.

4/4 Selects & Better rough 44HMAPR4/4 Selects & Better 13/16” P 44HMAP4/4 #1 Common 13/16” P 44HMAP1C5/4 Selects & Better rough 54HMAPR6/4 Selects & Better rough 64HMAPR8/4 Selects & Better rough 84HMAPR

HARD MAPLE

• Grows in the eastern U.S., principally Mid-Atlantic and Lake States - a cold weather tree favoring a more northerly climate

• Heartwood is usually light reddish brown but sometimes considerably darker, while the sapwood is commonly white with a slight reddish-brown tinge

• Heavy, strong, stiff, and hard with a fine, uniform texture• Grain is generally straight but birdseye, curly, or fiddleback grain is often

selected for furniture or specialty uses

HARDWOOD LUMBERSOFT MAPLE

• Grows throughout the eastern U.S. and to a lesser extent the West Coast• In most respects very similar to hard maple: heartwood of soft maple is

somewhat lighter in color and the sapwood, somewhat wider• Not as heavy, hard, or strong as hard maple



item no.

4/4 Selects & Better, NORTHERN WHITE rough 44SMAPR

4/4 Selects & Better, NORTHERN WHITE 13/16” P 44SMAP

4/4 Selects & Better, APPALACHIAN rough 44SMAPAR

4/4 Selects & Better, APPALACHIAN 13/16” P 44SMAPA

4/4 Selects & Better, PAINT rough 44SMAPPGR

4/4 Selects & Better, PAINT 13/16” P 44SMAPPG

4/4 Prime, 6’-7’ LONG rough 44SMAPRSHORT

4/4 Selects & Better, WORMY 13/16” P 44SMAPW

5/4 Selects & Better rough 54SMAPR6/4 Selects & Better rough 64SMAPR8/4 Selects & Better rough 84SMAPR



item no.

4/4 Firsts & Seconds rough 44AMAHR4/4 Firsts & Seconds 13/16” P 44AMAH5/4 Firsts & Seconds rough 54AMAHR6/4 Firsts & Seconds rough 64AMAHR8/4 Firsts & Seconds rough 84AMAHR10/4 Firsts & Seconds rough 10AMAHR

AFRICAN MAHOGANY

• Grows in western and central Africa• The timber of Khaya is called african mahogany, the only timber widely

accepted as “mahogany” besides that of the true mahogany (genus Swietenia)• Heartwood varies from pale pink to dark reddish brown• The grain is frequently interlocked producing a “ribbon stripe” figure• Decay resistant, moderately durable




item no.

4/4 FAS 1-Face & Better rough 44ROR4/4 FAS 1-Face & Better 13/16” P 44RO

4/4 FAS 1-Face & Better, 10”+ WIDER rough 44ROR10+

4/4 FAS 1-Face & Better, 10”+ WIDER 13/16” P 44RO10+

4/4 FAS 1-Face & Better, WHEAT COLOR SORT 13/16” P 44ROWHEAT

4/4 Rustic 13/16” P 44RORUSTIC5/4 FAS 1-Face & Better rough 54ROR6/4 FAS 1-Face & Better rough 64ROR8/4 FAS 1-Face & Better rough 84ROR4/4

QUARTER SAWN

rough 44ROQTRSR4/4 13/16” P 44ROQTRS5/4 rough 54ROQTRSR6/4 rough 64ROQTRSR8/4 rough 84ROQTRSR

RED OAK

• Most red oak comes from the eastern United States - the most abundant species group growing in the eastern hardwood forests

• Sapwood is nearly white; heartwood is brown with a tinge of red• Wood is heavy and hard

HARDWOOD LUMBER



item no.

4/4 FAS 1-Face & Better rough 44WOR4/4 FAS 1-Face & Better 13/16” P 44WO5/4 FAS 1-Face & Better rough 54WOR6/4 FAS 1-Face & Better rough 64WOR8/4 FAS 1-Face & Better rough 84WOR4/4

QUARTER SAWN

rough 44WOQTRSR4/4 13/16” P 44WOQTRS5/4 rough 54WOQTRSR6/4 rough 64WOQTRSR8/4 rough 84WOQTRSR4/4

RIFT CUT

rough 44WORIFTR5/4 rough 54WORIFTR6/4 rough 64WORIFTR8/4 rough 84WORIFTR

WHITE OAK

• Grown primarily in the South, South Atlantic and Central States• White oak is mostly straight-grained with a medium to coarse texture, with longer

rays than red oak and it therefore has more figure• Sapwood is light-colored; heartwood is grayish to light and dark brown• Heavy, somewhat greater than red oak• Heartwood pores are usually plugged with tyloses, which tend to make the

wood impenetrable by liquids - good decay resistance


straight line rip one edge item no.

4/4 Furniture rough 44FGEPR4/4 Furniture 13/16” P 44FGEP

EASTERN WHITE PINE

• Grows from Maine to northern Georgia and in the Great Lake States• Heartwood is light brown, often with a reddish tinge - it turns darker when

exposed to air• Wood has a uniform texture and is generally straight grained• Lightweight, moderately soft and moderately low in strength• Also known as white pine, northern white pine, and soft pine


HARDWOOD LUMBER, MOULDING



item no.

4/4 FAS 1-Face & Better rough 44POPR4/4 FAS 1-Face & Better 13/16” P 44POP4/4 FAS 1-Face & Better 7/8” P 44POP784/4 FAS 1-Face & Better 15/16” P 44POP1516

4/4 FAS 1-Face & Better, 10”+ WIDER rough 44POPR10+

4/4 FAS 1-Face & Better, 10”+ WIDER 13/16” P 44POP10+

5/4 FAS 1-Face & Better rough 54POPR6/4 FAS 1-Face & Better rough 64POPR8/4 FAS 1-Face & Better rough 84POPR12/4 FAS 1-Face & Better rough 124POPR

POPLAR

• Widespread growth throughout the eastern United States• A versatile wood that is easy to machine, plane, turn, glue and bore• Sapwood is white and frequently wide• The heartwood is yellowish brown, sometimes streaked with purple, green,

black, blue, and/or red - colorations do not affect physical properties of wood• Generally straight grained and uniform in texture• Moderately lightweight and soft



item no.

4/4 FAS 1-Face & Better rough 44WALR4/4 FAS 1-Face & Better 13/16” P 44WAL5/4 FAS 1-Face & Better rough 54WALR6/4 FAS 1-Face & Better rough 64WALR8/4 FAS 1-Face & Better rough 84WALR

WALNUT

• Growth ranges from Vermont to the Midwest and south into Louisiana and Texas• Wood develops a rich patina that grows more lustrous with age• This species produces a greater variety of figure types than any other• Heartwood varies from light to dark brown; sapwood is nearly white• Normally straight grained and stable• Heavy, hard, strong, and stiff


straight line rip one edge item no.

4/4 Selects & Better rough 44SAPELER4/4 Selects & Better 13/16” P 44SAPELE5/4 Selects & Better rough 54SAPELER6/4 Selects & Better rough 64SAPELER8/4 Selects & Better rough 84SAPELER

SAPELE

• A large African tree that grows from Sierra Leone to Angola and eastward throughout the Congo to Uganda

• Heartwood ranges in color from that of American mahogany to a dark reddish or purplish brown

• Lighter-colored and distinct sapwood• The texture is rather fine and the grain is interlocked producing narrow and

uniform striping on quarter-sawn faces

S4Ssize species item no.

3/4” x 2”

Cherry WWGFP2CHSoft Maple WWGFP2SMAPRed Oak WWGFP2ROPoplar WWGFP2POP

3/4” x 5 1/2”

Cherry WWGS4SCHSoft Maple WWGS4SSMAPRed Oak WWGS4SROPoplar WWGS4SPOP

QUARTER AND HALF ROUNDSsize species item no.

3/4” x 3/4”Quarter Round

Cherry WWG546CHSoft Maple WWG546SMAPRed Oak WWG546ROPoplar WWG546POP

1/2” x 1”Half Round


3/4” x 1 1/2”Half Round


530 EDGE MOULDsize species item no.

1/4” x 3/4”



MOULDINGCROWNsize species item no.

3/4” x 2 5/8”


3/4” x 3 5/8”


3/4” x 4 1/2”


3/4” x 5 1/2”


106 CROWNsize species item no.

3/4” x 3 5/8”


122 CROWNsize species item no.

3/4” x 1 11/16”


250 CHAIR RAILsize species item no.

1” x 3 9/16”


165 BEADED/FLUTED CASINGsize species item no.

3/4” x 3 3/4”


158 CASINGsize species item no.

3/4” x 3 1/2”


152 CASINGsize species item no.

11/16” x 2 1/4”


206 BASEsize species item no.

14/16” x 4 1/2”


354 PANEL MOULDsize species item no.

5/8” x 1 3/16”


350 PANEL MOULDsize species item no.

1 1/16” x 1 5/8”


224 BASE CAP

size species item no.

3/4” x 1 3/8”


506 COVE

size species item no.

3/4” x 3/4”



HARDWOOD PLYWOODCOLUMBIA FOREST PRODUCTS

• Columbia Forest Products is North America’s largest manufacturer of hardwood plywood and hardwood veneer

• Decorative interior veneers and panels for use in cabinetry, fine furniture, architectural millwork and commercial fixtures

• Manufactured with a formaldehyde-free resin derived from soy - this proprietary system, known as PureBond, is non-toxic and considered to be the leading no-added formaldehyde choice

HICKORYpanel size grade cut core item no.1/4” x 48.5” x 96.5” A-4 PS VC 14HA4PS3/4” x 48.5” x 96.5” A-1 PS VC 34HA1PS

ASHpanel size grade cut core item no.5.2mm x 48.5” x 96.5” A-1 white RC, WPF MDF 14AA1W1MDF

1/4” x 48.5” x 96.5”A-4 white PS VC 14AA4WPSB-4 PS VC 14AG1SN

3/4” x 48.5” x 96.5” A-1 white PS VC 34AA1PS

BEECH, EUROPEAN STEAMEDpanel size grade cut core item no.1/4” x 48.5” x 96.5” A-1 PS VC 14ESBB4PS3/4” x 48.5” x 96.5” A-1 PS VC 34ESBA1PS

ALDERpanel size grade cut core item no.1/4” x 48.5” x 96.5” B-4 PS VC 14ALDB4

3/4” x 48.5” x 96.5”A-1 PS VC 34ALDA1PSB-C PS VC 34ALDBCPS

BIRCHpanel size grade cut core item no.

1/4” x 48.5” x 96.5”C-4 RC, WPF VC 14BG1SB-2 RC, WPF MDF 14BG2SFC

1/2” x 48.5” x 96.5” SHOP RC VC 12BSH

3/4” x 48.5” x 96.5”B-2 RC, WPF VC 34BB2N1SHOP RC VC 34BSH

3/4” x 4’ x 10’ B-2 RC VC 3410BN1” x 48.5” x 96.5” B-2 RC, WPF VC 1BB2N1

CHERRYpanel size grade cut core item no.

1/4” x 48.5” x 96.5”B-1 PS MDF 14CHB1PSFCB-4 PS VC 14CHG1S

3/4” x 48.5” x 96.5”

A-1 PS VC 34CHA1PSA-1 PS MDF 34CHA1PSFCB-2 PS VC 34CHB2PSSHOP PS VC 34CHSH

3/4” x 4’ x 10’ A-1 PS VC 3410CHA1PS

KNOTTY PINEpanel size grade cut core item no.

1/4” x 48.5” x 96.5”A-1 PS MDF 14KPA1PSFCB-4 PS VC 14KPG1S

3/4” x 48.5” x 96.5”A-1 PS VC 34KPA1PSB-2 PS VC 34KPB2PS

MAPLEpanel size grade cut core item no.5.2mm x 4’ x 8’ B-1 RC MDF 14MB1NMDF

1/4” x 48.5” x 96.5”

A-1 white RC, WPF VC 14MA4W1B-2 white RC, WPF MDF 14MUWG2SFCB-4 white RC, WPF VC 14MUWG1SB-4 RC VC 14MB4N

1/2” x 48.5” x 96.5”B-2 RC, WPF VC 12MB2N1SHOP VC 12MSH

3/4” x 48.5” x 96.5”

A-1 white PS VC 34MA1PSWA-1 RC, WPF VC 34MA1N1B-1 RC, WPF VC 34MB1W1B-2 RC, WPF VC 34MB2N1SHOP VC 34MSH

3/4” x 4’ x 10’ A-1 white PS VC 3410MA1WPS

RED OAKpanel size grade cut core item no.

1/4” x 48.5” x 96.5”B-2 RC MDF 14ROG2SFCB-4 RC VC 14ROG1S

1/2” x 48.5” x 96.5” B-2 RC VC 12ROB2

3/4” x 48.5” x 96.5”

A-1 PS VC 34ROA1PSA-1 RC, WPF VC 34ROA11A-1 RC, WPF MDF 34ROA11FCB-2 RC, WPF VC 34ROB21B-2 RC, WPF MDF 34ROB21FCSHOP VC 34ROSH

3/4” x 4’ x 10’ A-1 PS VC 3410ROA1PS

SAPELEpanel size grade cut core item no.3/4” x 48.5” x 96.5” A-1 PS VC 34SAPA1PS

WHITE OAKpanel size grade cut core item no.1/4” x 48.5” x 96.5” B-4 PS VC 14WOG1S3/4” x 48.5” x 96.5” A-1 PS VC 34WOA1PS

WALNUTpanel size grade cut core item no.3/4” x 48.5” x 96.5” A-1 PS VC 34WA1PS

CUT: PS = Plain Sliced, RC = Rotary Cut, WPF = Whole Piece Face CORE: VC = Veneer Core, MDF = Medium Density Fiberboard Core


GREENPLY

• CARB II certified• FSC certified• 3/4” tolerance: +0.1/-0.5mm• Square tolerance: 2 diagonal difference ≤ 3mm

ALDER

panel size grade cut core item no.5.2mm x 4’ x 8’ A-2 PS MDF G14ALDA2PSFCFSC19mm x 4’ x 8’ A-2 PS Combi-VC G34ALDA2PSFSC

BIRCH

panel size grade cut core item no.

5.2mm x 4’ x 8’

B-2, white RC, WPF MDF G14BB2W1FCFSCB-2 RC, WPF MDF G14BB2N1FCFSCB-4 RC, WPF MDF G14BB4N1FCFSCC-4 RC, WPF MDF G14BC4N1FCFSC

12mm x 4’ x 8’C-2, white RC, WPF VC G12BC2W1FSCC-2 RC, WPF VC G12BC2N1FSC

19mm x 4’ x 8’

A-2 RC, WPF Combi-VC G34BA2N1FSCB-2, white RC, WPF Combi-VC G34BB2W1FSCB-2 RC, WPF VC G34BB2N1FSCC-2 RC, WPF combi-VC G34BC2N1FSC

CHERRY


5.2mm x 4’ x 8’A-4 PS MDF G14CHA4PSFCFSCA-4 PS VC G14CHA4PSFSC

19mm x 4’ x 8’ A-2 PS Combi-VC G34CHA2PSFSC

MAHOGANY

panel size grade cut core item no.5.2mm x 4’ x 8’ A-2 PS MDF G14MAHA2PSFCFSC

19mm x 4’ x 8’A-1 PS Combi-VC G34MAHA1PSFSCA-2 PS Combi-VC G34MAHA2PSFSC

MAPLE


5.2mm x 4’ x 8’A-4, white PS MDF G14MA4WPSFCFSCB-2, white RC, WPF MDF G14MB2W1FCFSC

19mm x 4’ x 8’A-2, white PS Combi-VC G34MA2WPSFSCB-2, white RC, WPF Combi-VC G34MB2W1FSCC-2, white RC, WPF Combi-VC G34MC2W1FSC

RED OAK


5.2mm x 4’ x 8’A-2 PS MDF G14ROA2PSFCFSCA-2 RC, WPF MDF G14ROA21FCFSCA-4 RC, WPF MDF G14ROA41FCFSC

19mm x 4’ x 8’A-2 PS Combi-VC G34ROA2PSFSCC-2 PS Combi-VC G34ROC2PSFSC

SAPELE

panel size grade cut core item no.5.2mm x 4’ x 8’ A-2 PS MDF G14SAPA2PSFCFSC12mm x 4’ x 8’ A-2 PS Combi-VC G12SAPA2PSFSC19mm x 4’ x 8’ A-2 PS Combi-VC G34SPA2PSFSC

WALNUT

panel size grade cut core item no.5.2mm x 4’ x 8’ A-2 PS MDF G14WA2PSFCFSC19mm x 4’ x 8’ A-2 PS Combi-VC G34WA2PSFSC

WHITE OAK


5.2mm x 4’ x 8’A-2 PS MDF G14WOA2PSFCFSCA-2 QTR SAWN MDF G14WOA2QSFCFSCA-2 RIFT CUT MDF G14WOA2RIFTFCFSC

19mm x 4’ x 8’A-1 RIFT CUT Combi-VC G34WOA1RIFTFSCA-2 PS Combi-VC G34WOA2PSFSCA-2 QTR SAWN Combi-VC G34WOA2QSFSC

HARDWOOD PLYWOOD

MDF CORE VENEER CORE COMBI-VCVeneer inner plys and MDF cross bands

CUT: PS = Plain Sliced, RC = Rotary Cut, WPF = Whole Piece Face CORE: VC = Veneer Core, MDF = Medium Density Fiberboard Core


PLYWOOD, BAMBOO COUNTERTOPSFIR PLYWOOD

• A-C plywood is a sanded panel with A-grade face, C-grade back and C-grade inner plys bonded with exterior glue - commonly used in high-moisture applications where the appearance or smoothness of only one side is important

• C-D plywood is a touch-sanded panel with C-Plugged-grade face, D-grade back and inner plys bonded with interior or exterior glue

• Marine Grade panels are manufactured with the same glueline durability requirements as other Exterior panels (APA) but with more restrictive veneer quality and manufacturing requirements - it is particularly suitable for marine applications where bending is required

panel size grade core item no.

1/2” x 4’ x 8’A-C VC 12ACFMarine VC 12MARGF

3/4” x 4’ x 8’A-C VC 34ACFC-D VC 34CDFMarine VC 34MARGF

3/4” x 4’ x 10’ A-C VC 3410ACF

MEDIUM DENSITY OVERLAY (MDO)

• MDO plywood is produced with a resin-impregnated fiber overlay designed for rapid, even paint application

• The overlay is smooth and generally opaque, although it may show some evidence of the underlying wood grain

• A preferred panel for applications where long-lasting paint or coating perfor-mance is required

• An exterior-type panel made with only 100% water resistant adhesive• MDO is produced with B-grade face and back veneers and C-grade inner plys• Easy to work using ordinary shop tools

panel size overlay core item no.1/2” x 4’ x 8’ two sides VC 12MDO3/4” x 4’ x 8’ two sides VC 34MDO

PREFINISHED WITH MINERAL OIL/BEESWAX COMPOUND

panel size grain color style item no.1.5” x 30” x 96” end natural parquet PFBN30961.5” x 36” x 72” end caramelized parquet PFBC3672

UNFINISHED

panel size grain color style item no.

1.5” x 30” x 96”end

natural parquet UFBN3096caramelized parquet UFBC3096

vertical caramelized face/ strand chestnut core UFCTVGCCHSNT3096

1.5” x 36” x 72”

endnatural parquet UFBN3672caramelized parquet UFBC3672

vertical natural face/strand wheat core UFCTVGNWHT3672vertical caramelized face/strand chestnut core UFCTVGCCHSNT3672strand chestnut face/vertical caramelized core UFCTCHSNTVG3672strand wheat face/vertical caramelized core UFCTWHTVGC3672

1.125” x 4” x 96” backsplash vertical caramelized

natural color butcher block pattern inlay UFBSVGCNcaramelized color butcher block pattern inlay UFBSVGCC

BAMBOO COUNTERTOPS

• A durable, bacteria-resistant alternative to traditional maple butcher blocks• Perfect for kitchen and bathroom applications because bamboo is naturally

bacteria resistant and durable - 25% harder than red oak• Strand countertops made with Xcora™ technology are extremely durable -

154% harder than red oak

parquet strand face + vertical core traditional


BAMBOO

panel size grain color item no.

3/4” x 4’ x 8’flat

natural UFFP3/4FGN4X8caramelized UFFP3/4FGC4X8

verticalnatural UFFP3/4VGN4X8caramelized UFFP3/4VGC4X8

panel size grain color item no.

13/16” x 1’ x 8’flat

natural UFFPFGN1X8caramelized UFFPFGC1X8

verticalnatural UFFPVGN1X8caramelized UFFPVGC1X8

SOLID STOCK BAMBOO PANELS

• SCS Indoor Advantage™ Gold (IAG) certified• ULEF adhesive

size grain color box qty item no.

4’ x 8’flat

natural 2 TUFFGN6M4X82PLY2caramelized 2 TUFFGC6M4X82PLY2

verticalnatural 2 TUFVGN6M4X82PLY2caramelized 2 TUFVGC6M4X82PLY2

BAMBOO VENEER

• Wood on wood construction

Cross-ply lamination

vertical grain (VG)

strand bamboo

�at grain (FG)

Stock Panels

Strand bamboo

�at grain (FG)

vertical grain (VG)

flat grainnatural

flat graincaramelized

vertical grainnatural

vertical graincaramelized

strandwheat

strandchestnut

strandjava

strandbrindle

panel size grain color min. order item no.

1/4” x 4’ x 8’flat

natural 2 UFP3P1/4FGN4X82caramelized 2 UFP3P1/4FGC4X82

verticalnatural 2 UFP3P1/4VGN4X82caramelized 2 UFP3P1/4VGC4X82

3/4” x 4’ x 8’flat

natural 1 UFP3/4FGN4X83caramelized 1 UFP3/4FGC4X83

verticalnatural 1 UFP3/4VGN4X83caramelized 1 UFP3/4VGC4X83

TRADITIONAL CROSS-PLY BAMBOO PANELS

• Ideal for cabinetry, reception areas, wall treatments, furniture and more• SCS Indoor Advantage™ Gold (IAG) certified• ULEF adhesive• Bamboo panels machine nicely, finish cleanly and offer a wide variety of grains

to complement any decor or project

panel size grain color min. order item no.

1/4” x 4’ x 6’ strand

brindle 2 UFPSYNB1/44X62chestnut 2 UFPSYNC1/44X62java 2 UFPSYNJ1/44X62wheat 2 UFPSYNW1/44X62

3/4” x 4’ x 6’ strand face/vertical core

brindle/caramelized 1 UFPSYNB3/44X6

chestnut/caramelized 1 UFPSYNC3/44X6

java/caramelized 1 UFPSYNJ3/44X6

STRAND BAMBOO PANELS

• Ideal for cabinetry, reception areas, wall treatments, furniture and more• Strand panels are made from bamboo strands fused together with an

environmentally safe adhesive to create a product 154% harder than red oak• SCS Indoor Advantage™ Gold (IAG) certified• Combination NAF/NAUF adhesive• Bamboo panels machine nicely, finish cleanly and offer a wide variety of grains

to complement any decor or project


PARTICLEBOARD

• Particleboard is a composite panel product consisting of cellulosic particles of various sizes that are bonded together with a synthetic resin or binder under heat and pressure

• Particle geometry, resin levels, board density and manufacturing processes may be modified to produce products suitable for specific end uses

• At the time of manufacture, additives can be incorporated to impart specific performance enhancements including greater dimensional stability, increased fire retardancy and moisture resistance

• The American National Standard for Particleboard (ANSI A208.1) is the North American industry voluntary standard - it classifies particleboard by density and strength and covers physical, mechanical and dimensional characteristics as well as formaldehyde levels

panel size item no.1/2” x 5’ x 10’ 12510PB11/16” x 4’ x 8’ 111648PB3/4” x 4’ x 10’ 34410PB3/4” x 5’ x 9’ 3459PB3/4” x 5’ x 10’ 34510PB3/4” x 5’ x 12’ 34512PB1” x 5’ x 8’ 158PB1-1/8” x 4’ x 8’ 11848PB1-1/8” x 5’ x 8’ 11858PB

CUT-TO-SIZEpanel size item no.3/4” x 25” x 121” 342510PB3/4” x 25” x 144” 342512PB3/4” x 30” x 121” 343010PB3/4” x 30” x 144” 343012PB

NAUF (No Added Urea Formaldehyde) FSCpanel size item no.1/2” x 5’ x 8’ 1258PBNAFFSC11/16” x 4’ x 8’ 111648PBNAFFSC3/4” x 4’ x 8’ 3448PBNAFFSC3/4” x 5’ x 8’ 3458PBNAFFSC3/4” x 5’ x 9’ 3459PBNAFFSC3/4” x 5’ x 12’ 34512PBNAFFSC1” x 5’ x 8’ 158PBNAFFSC1-1/8” x 5’ x 8’ 11858PBNAFFSC

NAUF (No Added Urea Formaldehyde) FSC CUT-TO-SIZEpanel size item no.3/4” x 30” x 121” 343012PBNAFFSC

MOISTURE RESISTANTpanel size item no.3/4” x 5’ x 8’ 3458PBMR3/4” x 5’ x 8’ (NAUF FSC) 3458PBMRNAFFSC

FIRE RATED FSCpanel size item no.1/2” x 5’ x 8’ 1258PBFRFSC11/16” x 4’ x 8’ 111648PBFRFSC3/4” x 4’ x 8’ 3448PBFRFSC3/4” x 5’ x 8’ 3458PBFRFSC

PARTICLEBOARD


MEDIUM DENSITY FIBERBOARDMEDIUM DENSITY FIBERBOARD (MDF)

• Medium Density Fiberboard (MDF) is widely used in the manufacturing of furniture, kitchen cabinets, door parts, mouldings, millwork and laminate flooring

• MDF is a composite panel product typically consisting of cellulosic fibers combined with a synthetic resin or other suitable bonding system and joined together under heat and pressure - additives may be introduced during manufacturing to impart additional characteristics

• The surface of MDF is flat, smooth, uniform, and dense• The homogeneous density profile of MDF allows intricate and precise machining

and finishing techniques for superior finished products• Stability and strength are important assets of MDF, which can be machined into

complex patterns that require precise tolerances• The American National Standard for Medium Density Fiberboard (ANSI

A208.2) is the North American industry voluntary standard - It classifies MDF by physical and mechanical properties and identifies product grades

• Specifications identified in the Standard include physical and mechanical properties, dimensional tolerances and formaldehyde emission limits

panel size item no.1/4” x 49” x 97” 1448MDF1/4” x 61” x 97” 1458MDF3/8” x 61” x 97” 3858MDF1/2” x 49” x 97” 1248MDF1/2” x 61” x 97” 1258MDF1/2” x 61” x 121” 12510MDF1/2” x 61” x 145” 12512MDF5/8” x 49” x 97” 5848MDF5/8” x 61” x 97” 5858MDF11/16” x 49” x 97” 111648MDF11/16” x 61” x 108” 111659MDF3/4” x 49” x 97” 3448MDF3/4” x 49” x 121” 34410MDF3/4” x 49” x 145” 34412MDF3/4” x 61” x 108” 3459MDF3/4” x 61” x 121” 34510MDF3/4” x 61” x 145” 34512MDF1” x 49” x 97” 148MDF1” x 49” x 145” 1412MDF1” x 61” x 97” 158MDF1-1/2” x 61” x 97” 11258MDF

DOOR GRADEpanel size item no.1/2” x 61” x 97” 1258MDFD5/8” x 48” x 97” 5848MDFD5/8” x 61” x 97” 5858MDFD3/4” x 49” x 97” 3448MDFD3/4” x 61” x 97” 3458MDFD

ULTRA LIGHTWEIGHTpanel size item no.3/4” x 49” x 97” 3448MDFUL3/4” x 61” x 97” 3458MDFUL3/4” x 61” x 145” 34512MDFUL

MOISTURE RESISTANTpanel size item no.15/16” x 61” x 97” 151658MDFMR

NAUF (No Added Urea Formaldehyde) FSCpanel size item no.1/4” x 49” x 97” 1448MDFNAFFSC1/2” x 61” x 97” 1258MDFNAFFSC11/16” x 49” x 97” 111648MDFNAFFSC3/4” x 49” x 97” 3448MDFNAFFSC3/4” x 61” x 97” 3458MDFNAFFSC3/4” x 61” x 145” 34512MDFNAFFSC1” x 49” x 97” 148MDFNAFFSC1” x 61” x 97” 158MDFNAFFSC

FIRE RATEDpanel size item no.1/2” x 61” x 97” 1258MDFFR3/4” x 61” x 97” 3458MDFFR


THERMALLY FUSED MELAMINETHERMALLY FUSED MELAMINE (TFM)

• Made by fusing a resin-impregnated sheet of decorative paper directly to a substrate

• It is the same paper used in the production of HPL (high pressure laminate) but is not paired with kraft paper

• Heat and pressure activate the resin in the saturated TFM sheet, creating a cross-linked bond with the substrate, effectively sealing the substrate

• Particleboard and MDF are ideal substrates for TFM because they are consistent, uniform in strength and free of defects

• Melamine surface textures are created with steel press plates that emboss the decorative overlay to heighten the realism of wood grain, stone or abstract designs - steel press plates are also used to create or control the gloss level of the surface

face back panel size core item no.

300 Classic White 300 Classic White

1/4” x 5’ x 8’ MDF 1458300P5/8” x 4’ x 8’ PB 5848300P3/4” x 4’ x 8’ PB 3448300P3/4” x 4’ x 8’ PB FSC 3448300NUGRNFSC3/4” x 5’ x 8’ PB FSC 3458300NUGRNFSC1” x 5’ x 8’ PB 158300P

631 Black

805 Sunset Grey 1/4” x 5’ x 8’ MDF 1458631805P

631 Black5/8” x 4’ x 8’ PB 5848631P3/4” x 4’ x 8’ PB 3448631P3/4” x 5’ x 8’ PB 3458631P

637 Jubilee Cherry640 Chocolate Cherry 1/4” x 5’ x 8’ MDF 1458637640P

637 Jubilee Cherry3/4” x 4’ x 8’ PB 3448637P3/4” x 5’ x 8’ PB 3458637P

640 Chocolate Cherry637 Jubilee Cherry 1/4” x 5’ x 8’ MDF 1458637640P

640 Chocolate Cherry3/4” x 4’ x 8’ PB 3448640P3/4” x 5’ x 8’ PB 3458640P

805 Sunset Grey

631 Black 1/4” x 5’ x 8’ MDF 1458631805P

805 Sunset Grey5/8” x 4’ x 8’ PB 5848805P3/4” x 4’ x 8’ PB 3448805P3/4” x 5’ x 8’ PB 3458805P

810 Antique White

920 NE Almond 1/4” x 5’ x 8’ MDF 1458810920P

810 Antique White5/8” x 4’ x 8’ PB 5848810P3/4” x 4’ x 8’ PB 3448810P3/4” x 5’ x 8’ PB 3458810P

886 Cabinet Maple

300 Classic White 1/4” x 5’ x 8’ MDF 1458300886P

886 Cabinet Maple5/8” x 4’ x 8’ PB 5848886P3/4” x 4’ x 8’ PB 3448886P3/4” x 5’ x 8’ PB 3458886P

920 NE Almond

810 Antique White 1/4” x 5’ x 8’ MDF 1458810920P

920 NE Almond5/8” x 4’ x 8’ PB 5848920P3/4” x 4’ x 8’ PB 3448920P3/4” x 5’ x 8’ PB 3458920P

992 Hardrock Maple

300 Classic White 1/4” x 5’ x 8’ MDF 1458300992P

992 Hardrock Maple5/8” x 4’ x 8’ PB 5848992P3/4” x 4’ x 8’ PB 3448992P3/4” x 5’ x 8’ PB 3458992P

E19 Chocolate AppleE35 Sound Cherry 1/4” x 5’ x 8’ MDF 1458E19E35P

E19 Chocolate Apple3/4” x 4’ x 8’ PB 3448E19P3/4” x 5’ x 8’ PB 3458E19P

E30 Wild AppleE31 Wild Apple Rust 1/4” x 5’ x 8’ MDF 1458E30E31P

E30 Wild Apple3/4” x 4’ x 8’ PB 3448E30P3/4” x 5’ x 8’ PB 3458E30P

E31 Wild Apple RustE30 Wild Apple 1/4” x 5’ x 8’ MDF 1458E30E31P

E31 Wild Apple Rust3/4” x 4’ x 8’ PB 3448E31P3/4” x 5’ x 8’ PB 3458E31P

E35 Sound CherryE19 Chocolate Apple 1/4” x 5’ x 8’ MDF 1458E19E35P

E35 Sound Cherry3/4” x 4’ x 8’ PB 3448E35P3/4” x 5’ x 8’ PB 3458E35P

COMPLETE MATCH


KERFKORE

• Kerfkore is a substrate that allows horizontal or vertical grade laminates, metals, 2-ply and phenolic backed veneers to be laminated flat and then formed into virtually any shape without stress cracks, delamination or telegraphing

• Provides for smooth and symmetrical inside and outside radii up to 3-1/2”• Saves time and improves quality by laminating and sanding flat prior to bending• It is dimensionally stable and holds its shape when formed with a series of

horizontal ribs• The face is a black latex impregnated paper• Ideal for production environments

panel size core item no.3/4” x 4’ x 8’ particleboard 34KERFKORE1S

FLEXBOARD

• Flexboard is a bendable substrate with a hardboard face that can be formed first and laminated last

• A low-cost alternative to bending plywood for radius fabrication• Flexboard provides 10” radius fabrication quickly and easily with no sanding,

patching, multiple layers, special installation, or odor• Can be bent and attached to a ribbed frame easily with staples, nails and glue• Standard particleboard core and a .080” thick hardboard face• The hardboard surface is ideal for painting or laminating paper, vinyl, veneer,

HPL, and metal• Flexboard’s stable hardboard face allows for the pre-lamination of a single-ply

veneer or thin paper-backed veneer by use of a cold or hot press prior to forming• The panel can be processed flat for machining and sanding before forming into

the finished shape

panel size core item no.3/4” x 4’ x 8’ particleboard 34FLEXBOARD3/4” x 8’ x 4’ particleboard 34FLEXBOARD84

TIMBERFLEX

• Offers a multitude of advantages over conventional bending methods including less labor, no veneer checking or telegraphing, elimination of sanding, patching and laying up multiple layers of plywood

• Very flexible and will not spring back therefore creating a very uniform curve• Timberflex is the first and only high-quality 3/4” bendable panel that has a

three-ply Italian popular face ready to paint or laminate without the need for patching or sanding

• Can bend to a 5” radius and are perfectly flat without dips, valleys and hard spots often found in bendable plywood

• Timberflex is dimensionally sized to have the same thickness throughout to assure excellent seam hiding characteristics

• Timberflex is the preferred product for use in traditional and custom fabrication by first forming the panel to the desired shape and then laminating last with the specified face material

• There is no need for any surface preparations as the product is designed so even a novice can create uniform and high quality curved items

panel size core item no.3/4” x 4’ x 8’ particleboard 34TIMBERFLEX3/4” x 8’ x 4’ particleboard 34TIMBERFLEX84

ECONOKORE

• An economical substitute for bending panels that saves time - no sanding or patching required

• No surface preparation - high density overlay provides smoother, more symmetrical laminating or painting surface

• No warping or twisting - 2-ply construction is a more stable and balanced panel• No size variation - econoKORE is sanded and calibrated for consistent size and

thickness• No special tools or installation steps needed - Install using traditional fabricating

tools and methods

panel size core item no.3/8” x 4’ x 8’ MDF 38ECONO483/8” x 8’ x 4’ MDF 38ECONO84

BENDING PANELS

ATLANTA GA5075 North Buford Hwy

Suite 100Norcross, GA 30071

678.924.0386 888.924.0386

FAX 678.924.0391

CHATTANOOGA TN234 Direct Connection Drive

Rossville, GA 30741706.891.2000800.506.9663

FAX 706.891.4229

RALEIGH NC4213 Poole Road

Raleigh, NC 27610919.231.6620800.982.0999

FAX 919.231.9687

BALTIMORE MD6660 Santa Barbara Road

Elkridge, MD 21075410.796.7600800.935.6229

FAX 410.796.7729

GREENSBORO NC1819 Baker Road

High Point, NC 27263336.431.2712800.662.9060

FAX 336.431.2750

RICHMOND VA1701 Rhoadmiller Street

Richmond, VA 23513804.359.1374800.552.4046

FAX 804.353.3206

CHARLESTON SC4325 Lear Avenue

N. Charleston, SC 29418843.529.0808800.466.8499

FAX 843.529.0805

GREENVILLE SC1441 Hwy 101 South

Greer, SC 29652864.877.7328800.868.9669

FAX 864.877.7413

ROANOKE VA701 Gainsboro RoadRoanoke, VA 24016

540.344.2079800.948.7156

FAX 540.344.2306

CHARLOTTE NC4250 Golf Acres DriveCharlotte NC 28208

704.394.9479800.868.0291

FAX 704.398.2162

NORFOLK VA3307 Chesapeake Boulevard

Norfolk, VA 23513757.855.3908800.277.4254

FAX 757.857.6133

TAMPA FL5100 West Hanna Avenue

Tampa, FL 33634800.432.1149888.432.1149

FAX 813.887.1902

Build something great.1-877-GO-WURTH

www.wurthwoodgroup.com

BDC 10.2011

Date post:	06-Feb-2018
Category:	Documents
Upload:	truongliem
View:	214 times
Download:	0 times

wurth wood group inventory guide - Wurth Wood Group Blog · PDF file• Grows throughout...

Documents