+ All Categories
Home > Documents > Document

Document

Date post: 30-May-2015
Category:
Upload: xiamen-xing-henglong-lighting-technology-co-ltd
View: 861 times
Download: 0 times
Share this document with a friend
Description:
www.xinghenglong.com
Popular Tags:
11
THE RESPONSIBLE SOLUTION Environmentally friendly, energy saving, eXtreme life fixtures. Replaces T8s, T5s, Metal Halide, High and Low Pressure Sodium bulbs. Virtually maintenance free. Dimmable. Starts Instantly. High Power Factor. Low Harmonic Distortion. Last up to 100,000 hours. FOR A DISTRIBUTOR NEAR YOU CALL: 1-877-736-0447 OR VISIT WWW.TUROLIGHT.COM LEADING THE WAY THROUGH RESEARCH AND DESIGN PRESENTS
Transcript
Page 1: Document

THE RESPONSIBLE SOLUTIONEnvironmentally friendly, energy saving, eXtreme life fixtures. Replaces T8s,

T5s, Metal Halide, High and Low Pressure Sodium bulbs. Virtually maintenance free. Dimmable. Starts Instantly.

High Power Factor. Low Harmonic Distortion. Last up to 100,000 hours.

FOR A DISTRIBUTOR NEAR YOU CALL: 1-877-736-0447 OR vISIT

WWW.TUROLIGHT.COM LEADING THE WAY THROUGH RESEARCH AND DESIGN

PRESENTS

Page 2: Document

L I M I T E D W A R R A N T Y

LAMP AND BALLAST WARRANTY (Non-Self Ballasted Products)

Turolight Inc. warrants all lamps and ballasts to be free from defective materials and workmanship, under normaland proper installation (by a qualified and licensed electrician) and use for a period of five (5) years from the dateof invoice. This limited warranty applies to all Induction products 40 watts and over. Governing Law: This Limited Warranty shall be governed by the laws of the province of Ontario, Canada.

FIXTURE WARRANTY

All Turolight Inc. fixtures (fixtures are all other components excluding the lamp and ballast) are tested and in good working order before leaving the factory and are guaranteed to be free from defective materials and workmanship. A new part will be furnished in exchange for any part in a fixture which under normal use and service discloses a defect within one (1) year from date of delivery; however our liability extends only to replacement of the defectivepart or parts, and our maximum liability shall not exceed the original purchase price of the defective unit. Turolight Inc. will not allow any charge for labour or materials that does not have the company’s written approval before the work is begun. Such approval is at the sole discretion of Turolight Inc. Any other warranty, expressed or implied is hereby void.

The preceding warranties do not apply if, in the judgment of Turolight Inc., the product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or maintained in a manner not conforming to the product’s instructions, has been modified in any way, or has a defaced or removed serial number. Repair by anyone other than Turolight Inc. or an approved agent voids this warranty. The maximum liability of Turolight Inc. is the product purchase price.

EXTERIOR & INTERIOR LIGHTING FIXTURES

Page 3: Document

ILLUMINEX-ID-WP

EXTERIOR & INTERIOR LIGHTING FIXTURES

12.99(330)18.11(460)

9.06(230)

90

105

120

135135

120

105

90

75

60

45

30 15 0 15 30

45

60

75

80

120

160

200

C0-C180 C90-C270

cd/klm �=64 %

Ordering Code: ID-WP-R100 (100w)Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 80 LPW or 8000 Lumens• Scotopic Lumens: 136 LPW (correction 1.7) or 13,600 Pupil Lumens*• Die cast aluminum housing with grey/bronze/black/white

powder coated finish for corrosion-resistance.• Anodized aluminum reflector and UV stabilized prismatic lens.• Gas-tight silicon rubber seal made for wet locations. • cUL Approved, IP54 Rated

Lamps and ballasts:• 100W R-type induction lamp with high lighting efficacy at rated 100,000hrs lifetime, greater than 20 years at 4000hrs/year.• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, and safety protection. Optional wireless and dimming controls available.• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• --24o~+40o.

Applications:• Commercial/Industrial buildings, plazas, shopping malls etc...

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

Page 4: Document

ILLUMINEX-ID-PL

EXTERIOR & INTERIOR LIGHTING FIXTURES

9.25

(235

)

10.04(255)

8.06

(225

)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

80

120

160

C0-C180 C90-C270

cd/klm η=64 %

Ordering Code: ID-PL-C200 (200w)Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 90 LPW or 20,000 Lumens• Scotopic Lumens: 153 LPW (correction 1.7) or 34,000 Pupil Lumens*• Square welded aluminum housing with grey/bronze/black/ white powder coated finish for corrosion-resistance.• Anodized aluminum reflector designed to optimize light distribution.• PLC-200 - crystal clear tempered glass lens. PLCa-200 - UV stabilized and heat resistant polycarbonate lens.• cUL Approved, IP54 Rated

Lamps and ballasts:• 200/250W circular loop type induction lamp with high lighting efficacy at rated 80,000hrs lifetime, about 20 years burning on 4000hrs/year.• Electronic ballast features high power factor (>0.95) flickering free, constant output wattage, and safety protection.• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85

Ambient temperature for lighting fixture:• -24o~+40o.

Applications:• Parking lots, plazas, shopping malls, tennis courts, walk ways.

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

Page 5: Document

LLUMINEX-ID-HBR

EXTERIOR & INTERIOR LIGHTING FIXTURES

27.56(700)

48.03(1220)

~12

.20(

310)

4-Ø0.51(Ø13)

14.57(370)

~6.

69(1

70)

~6.

69(1

70)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

100

150

C0-C180 C90-C270

cd/klm �=65%

Ordering Code: ID-HB-R400 (400w) ID-HB-R250 (250w)Features : • Instant on, long life, maintenance free operation. • Photopic Lumens at 400W: 90 LPW or 36,000 Lumens• Scotopic Lumens at 400W: 153 LPW (correction 1.7) or 61,200 Pupil Lumens*• Aluminum latches create tight seal increasing the IP rating.• Anodized aluminum reflector and clear tempered glass lens are designed to optimize light distribution.• Gas-tight silicon rubber seal perfect for wet locations.• Can be suspended by poles, chains or by mounting to wall or surface• cUL Approved, IP65 Rated

Lamps and ballasts:• 400W R-type induction lamps with high lighting efficacy rated at avg. 80,000hrs lifetime, about 20 years burning at 4000hrs/year.• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, with safety protection. • Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• -20o~+40o.

Applications:• Warehouses, tunnels, bridges, highways, airports, stadiums.

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

Page 6: Document

ILLUMINEX-ID-CH

EXTERIOR & INTERIOR LIGHTING FIXTURES

15 0 15C0-C180 C90-C270

CH C70 CH-C100

50

70

100

125

150

cd/klm

90

105

30

45

60

75

90

105

30

45

60

75

15 0 15C0-C180 C90-C270

CH C70 CH-C100

50

70

100

125

150

cd/klm

90

105

30

45

60

75

90

105

30

45

60

75

Ordering Code: ID-CH-C70 (70w) ID-CH-C100 (100W)Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 80 LPW or 8000 Lumens• Scotopic Lumens: 136 LPW (correction 1.7) or 13,600 Pupil Lumens*• High pressure die cast aluminum alloy housing for corrosion resistance.• Anodized aluminum reflector and clear tempered glass lens are designed to optimize light distribution.• Gas-tight silicon rubber seal perfect for wet locations.• Optional twist-lock photocell available upon request.• cUL Approved, IP55 Rated

Lamps and ballasts:• 100W circular loop induction lamps with high lighting efficacy

rated at avg. 80,000hrs lifetime, about 20 years burning at 4000hrs/year.

• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, with safety protection.

• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• -20o~+40o.

Applications:• Freeway, highway, parking lots, public entrances, off-street areas.

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

Page 7: Document

ILLUMINEX-ID-GF-FRZ

EXTERIOR & INTERIOR LIGHTING FIXTURES

R 0.18(4.5)

~14

.69(

373)

~7.

48(1

90)

~4.76

(121

)~

13.7

8(35

0)

19.69(500)

0.2(5)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

80

120

160

C0-C180 C90-C270

cd/klm

Ordering Code: ID-GF-R100-FRZ (100w)Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 80 LPW or 12,000 Lumens• Scotopic Lumens: 136 LPW (correction 1.7) or 20,400 Pupil Lumens*• Die cast aluminum housing with white power coated finish for corrosion resistance. • Crystal clear or Frosted tempered glass lens with beautiful contour. • UV stabilized and heat resistant polycarbonate lens.• Light weight and compact structure for easy maintenance.• cUL Approved, IP65 Rated

Lamps and ballasts:• 150W square loop induction lamp with high lighting efficacy

at rated 100,000hrs lifetime, greater than 20 years at 4000hrs/year.• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, and safety protection. Optional wireless and dimming controls available.• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• -40o~+10o.

Applications:• Freezers etc...

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

R 0.18(4.5)~

14.6

9(37

3)~

7.48

(190

)

~4.76

(121

)~

13.7

8(35

0)

19.69(500)

0.2(5)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

80

120

160

C0-C180 C90-C270

cd/klm

Page 8: Document

ILLUMINEX-ID-G

EXTERIOR & INTERIOR LIGHTING FIXTURES

R 0.18(4.5)

~14

.69(

373)

~7.

48(1

90)

~4.76

(121

)~

13.7

8(35

0)

19.69(500)

0.2(5)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

80

120

160

C0-C180 C90-C270

cd/klm

Ordering Code: ID-GF-R100-FROST (100w) ID-GF-R150-GL (150w)Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 80 LPW or 12,000 Lumens• Scotopic Lumens: 136 LPW (correction 1.7) or 20,400 Pupil Lumens*• Die cast aluminum housing with white power coated finish for corrosion resistance. • Crystal clear or Frosted tempered glass lens with beautiful contour. • UV stabilized and heat resistant polycarbonate lens.• Light weight and compact structure for easy maintenance.• cUL Approved, IP65 Rated

Lamps and ballasts:• 150W square loop induction lamp with high lighting efficacy

at rated 100,000hrs lifetime, greater than 20 years at 4000hrs/year.• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, and safety protection. Optional wireless and dimming controls available.• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• -20o~+40o.

Applications:• Parking garages, gas stations, schools, shopping malls, canopies, etc...

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

R 0.18(4.5)~

14.6

9(37

3)~

7.48

(190

)

~4.76

(121

)~

13.7

8(35

0)

19.69(500)

0.2(5)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

80

120

160

C0-C180 C90-C270

cd/klm

Page 9: Document

ILLUMINEX-ID-HB-Aluminium

EXTERIOR & INTERIOR LIGHTING FIXTURES

0.71(18) 0.71(18)

22.44(570)22.44(570)

~27.

95(7

10)

~27.

17(6

90)

Unit:in.(mm)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

100

150

200

250

300

C0-C180 C90-C270

cd/klm η= 76%

Ordering Code: ID-HB-ALUM-C200 (200w) ID-HB-ALUM-C250 (250w) ID-HB-WIDE-C300 (300w)

Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 90 LPW or 20,000 Lumens• Scotopic Lumens: 153 LPW (correction 1.7) or 34,000 Pupil Lumens*• Die cast aluminum housing with white power coated finish for corrosion resistance. • Crystal clear or Frosted tempered glass lens with beautiful contour. • UV stabilized and heat resistant polycarbonate lens.• Light weight and compact structure for easy maintenance.• cUL Approved, IP43 Rated

Lamps and ballasts:• 200W circular loop induction lamp with high lighting efficacy

at rated 100,000hrs lifetime, greater than 20 years at 4000hrs/year.• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, and safety protection. Optional wireless and dimming controls available.• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• -25o~+40o.

Applications:• Warehouses, supermarkets, retail showrooms, exhibition halls, factories.

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

0.71(18) 0.71(18)

22.44(570)22.44(570)

~27.

95(7

10)

~27.

17(6

90)

Unit:in.(mm)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

100

150

200

250

300

C0-C180 C90-C270

cd/klm η= 76%

Page 10: Document

ILLUMINEX-ID-HB-Prismatic

EXTERIOR & INTERIOR LIGHTING FIXTURES

Ø 22.44(570)

Ø 9.61(244)

~27

.17(

690)

90

105

120

135135

120

105

90

75

60

4530 15 0 15 30

45

60

75

40

60

80

100

C0-C180 C90-C270

cd/klm

Ordering Code: ID-HB-ACR-C200 (200w) ID-HB-ACR-C250 (250w)

Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 90 LPW or 20,000 Lumens• Scotopic Lumens: 153 LPW (correction 1.7) or 34,000 Pupil Lumens*• Die cast aluminum housing with white power coated finish for corrosion resistance. • Crystal clear or Frosted tempered glass lens with beautiful contour. • UV stabilized and heat resistant polycarbonate lens.• Light weight and compact structure for easy maintenance.• cUL Approved, IP43 Rated

Lamps and ballasts:• 200W circular loop induction lamp with high lighting efficacy

at rated 100,000hrs lifetime, greater than 20 years at 4000hrs/year.• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, and safety protection. Optional wireless and dimming controls available.• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• -25o~+40o.

Applications:• Warehouses, supermarkets, retail showrooms, exhibition halls, factories..

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.

Page 11: Document

ILLUMINEX-ID-FL

EXTERIOR & INTERIOR LIGHTING FIXTURES

48.41~

(377

)

0.12-Ø0.47(3-Ø12 )

23.03(585) 7.68(195)

7.87(200)

~21

.46(

545)

90

105105

90

75

60

45

30

15 0 15

30

45

60

75

80

120

C0-C180 C90-C270

cd/klm

Ordering Code: ID-FL-R100 (100w)

Features : • Instant on, long life, virtually maintenance free operation. • Photopic Lumens: 80 LPW or 12,000 Lumens• Scotopic Lumens: 136 LPW (correction 1.7) or 20,400 Pupil Lumens*• Die cast aluminum housing with white power coated finish for corrosion resistance. • Crystal clear or Frosted tempered glass lens with beautiful contour. • UV stabilized and heat resistant polycarbonate lens.• Light weight and compact structure for easy maintenance.• cUL Approved, IP65 Rated

Lamps and ballasts:• 100W square loop induction lamp with high lighting efficacy

at rated 100,000hrs lifetime, greater than 20 years at 4000hrs/year.• Electronic ballast features high power factor (>0.95), flickering free, constant output wattage, and safety protection. Optional wireless and dimming controls available.• Low harmonic distortion at < 10%• Low lumen depreciation < 25% at end of life• High Colour Rendering Index >85.

Ambient temperature for lighting fixture:• -20o~+40o.

Applications:• Billboards, Buildings, Parks, Pools, Parking lots, Tennis courts etc...

* Photopic/Scotopic response of the eye to various light sources, and how much contraction and focusing the pupil responds with. The term “pupil lumens” is not yet widely accepted, but should be considered when comparing lighting technologies of this nature.