7/28/2019 XA(T,H)S_37-97_en.pdf

1/8

Atlas Copco Portable air compressors

XA(T,H)S 37-97

32 89 l/s, 1.9 5.3 m3/min, 67 190 cfm

Series 7,Versatile compressors for wide ranging applications

7/28/2019 XA(T,H)S_37-97_en.pdf

2/8

Comprising models XAHS 37, XAS 47, XAS 57, XAS 67, XATS 67,

XAS 77 and XAS 97, Series 7 are an innovative range of single axle,

oil injected rotary screw compressors.

Powered by the all new Deutz 2011 diesel 2- or 3-cylinder engine

range, Series 7 will provide a reliable source of compressed air to

drive pneumatic tools including chipping hammers, jackhammers,

nut runners, grinding tools and rammers. High free air delivery

applications, including sandblasting, are also covered.

An optional integral 6.5 or 12 kVA generator can be specified to

provide additional power for welding, lighting, heating,

site instruments and power tools.

A wide range of further options, listed in outline at the end of this

document, are also available.

The features you have asked us for

In depth market analysis, ranging from questionnaires, customer panels

and customer visits, has enabled us to build new Series 7 with the

specifications you have asked for. Core values include: Reliability,

durability, low cost of ownership and excellent serviceability.

By listening to your demands, Atlas Copco has developed a number of

new features. In addition to an opening canopy, removable side panels

and detachable front and rear baffle are fitted. These are bolted to

a 4mm thick support frame. This economical feature offers fast and easy

service access.

For best in class corrosion protection, all panels are produced from

zincor steel with a powder coat finish; the chassis has a KTL epoxy

layer coating with a powder coat finish.

Built and tested to ISO 9001 quality assurance

standards

Atlas Copcos stringent manufacturing standards follow

ISO 9001 quality assurance regulations. All compressors are

produced and tested to exacting standards for optimum

performance in the most demanding conditions.

Atlas Copco - the world leader in portable aircompressors

One in three compressors sold throughout the World is

manufactured by Atlas Copco. Produced in the Worlds

largest dedicated compressor manufacturing plant,

our advanced research and development and proven

products ensure we offer the best solution for all your

compressed air needs.

Series 7 A complete range designed to achievethe highest customer satisfaction

7/28/2019 XA(T,H)S_37-97_en.pdf

3/8

High efficiency

By combining a low rotor speed

with few moving parts,

the compressor element offers

high efficiency with reduced

wear. With Atlas Copco, long-

term reliability and efficiency

comes as standard.

Low operational cost

A stepless and fully automatic

regulator varies the engine speed

to match air demand. This

reduces power and fuel

consumption and ensures

continuous air flow at stable

pressure.

Centralized controls

All controls are grouped on a

single panel above the outlet

valves and covered by a ridgid

plastic cover for safety, ease of

monitoring and operation.

Heavy duty air filter

A single, high performance two-

stage air intake filter is standard.

It prevents dust and dirt particles

from entering the engine and the

compressor.

A service indicator on the filter

indicates when it needs

maintenance or replacement.

Wide opening canopy

Supported by two gas struts, the

one-piece canopy opens fully for

excellent service access. A new

type of powder coated zincor

steel is used on the bodywork for

excellent corrosion resistance.

This can help ensure the

compressor retains a higher

residual value.

Improved serviceability

The removable side panels and

front and rear baffles provide fast

and easy service access. They are

made from zincor steel and

powder coated for longevity.

Removable undercarriage

The undercarriage can be

removed for static vehicle

mounting.

Series 7 Everything you asked forin compressed air power

High fuel autonomy

The high capacity fuel tank has

sufficient capacity to complete a

full shift.

Made from transparent material,the tanks high capacity reduces

downtime lost to mid-shift

refueling.

7/28/2019 XA(T,H)S_37-97_en.pdf

4/8

Series 7 All the options for your specific applications

XAS 67 and XAS 97 models

can be specified with an integral

12 kVA generator. Developing

6.5 or 12 kVA, the generator

can be fitted with an automatic

control system that will

continuously monitor the

demand for power. The system

will match the engine speed to

power demand, saving fuel and

reducing emissions.

On XAS 47 up to XAS 97, we

use a 1 litre lubricator.

The flow of the lubricating oil

can be controlled by a knob at

the side of the lubrication.

A level indicator is foreseen to

prevent running without

lubricator oil.

Series 7 models can be supplied

with a 20 m capacity hose reel.

Manufactured from tough

corrosion resistant polyethylene,

it is supplied with a 3/4"

reinforced hose. The hose can be

operated directly from the reel.

An aftercooler and filters are

available on all 7, 10.3 an 12 bar

models. The unit is installed on

the cool side of the compressor.

For additional liquid and particle

removal, the aftercooler can also

be fitted with a PD and QD filter.

Road transport lights and

reflectors supplied in accordance

with national requirements.

Support mounted models with high integral

strength for longevity.

7/28/2019 XA(T,H)S_37-97_en.pdf

5/8

Adjustable with brakes Adjustable without brakes Fixed with brakes Fixed without brakes

Options XAHS 37 XAS 47 XAS 47 G XAS 57 XAS 67 XAS 67 G XATS 67 XAS77 XAS 97 XAS 97 GSafety chain

Road signalisation Semi road signalisation

24V adaptor

Wheel chocks

Loose ball coupling

Toolbox single

Toolbox twin

Lubricator 1 litre

Aftercooler + Waterseparator

PD filter

QD filter

Reheater

Anti-frost device

Generator 6 kW 110 V

Generator 6.5 kVA 230 V - 3Ph

Generator 6.5 kVA 230/400 V

Generator 12 kVA 230V - 3Ph

Generator 12 kVA 230/400 V

Hose reel

Safety cartridge

Spark arrestor

Overspeed valve Complete refinery equipment

Non return valve

Cold start -20C

Anti-theft device

Particle filter

Spillage free frame

Customer colour frame 1x

Customer colour canopy 1x

Customer colour canopy 2x

Additional literature set

= available

7/28/2019 XA(T,H)S_37-97_en.pdf

6/8

Compressor

Type

Normal effective working pressure

Actual free air delivery guaranteed

according to ISO1217

ed.3 1996 annex D

Sound power: acc. 2000/14 EC

Sound pressure level acc. ISO2151 from 7m

Oil capacity

Engine

Type - model

Number of cylinders

Full load speed

Output at rated speed

Capacity of fuel tank

Unit dimensions

towbar :

Length (A)

Width (B)

Height (C)

Weight (ready-to-operate)

Weight (dry)

110V: +35 kg /77 lbs 230/400V: +42kg / 93 lbs

Generator

Electric power 1 ph

3 ph

Sockets CEE 1 ph

CEE 3 phSchuko 1 ph

1) complying with British Gas Spec. TIN 122) complying with ISO 8528/8 - DIN 6280/10

Principal dataSeries 7Designed for the environment

Meets legal safety and environmental requirements

All Series 7 compressors meet current European and US legal requirements relating to the working

environment and regulations concerning safety, exhaust emissions and noise. Deutz 2011 engines fully

comply with COM II and EPA II exhaust emission regulations. Atlas Copco has fully implemented its

Environmental Management System into the design and manufacture process of these machines, fulfilling

the requirements of ISO 14001. All models comply with the outdoor noise directive 2000/14/EC.

Some units in the range comply with outdoor noise limits set for 2006.

Due to their low noise rating, Series 7 compressors may besuitable for operation in noise sensitive environments,

including near hospitals, schools and residential areas.

Night operation may also be possible.

The spillage free frame will contain allfluid so no oil fuel or coolant can leak

directly to the ground.A

A

7/28/2019 XA(T,H)S_37-97_en.pdf

7/8

XAHS 37 XAS 47 XAS 47 DdG XAS 57 XAS 67 XAS 67 6.5/12 DdG XATS 67 XAS77 XAS 97 XAS 97 DdG

Simultaneous Simultaneous Non-Simultaneous

bar 12 7 7 7 7 7 10.3 7 7 7

psig 175 102 102 102 102 102 150 102 102 102

l/s 32 43 33 50 62 58 58 72 89 89

m3/min 1.9 2.6 2.0 3.0 3.7 3.5 3.5 4.3 5.3 5.3

cu.ft/min 67 92 71 106 130 125 125 152 190 190

dB(A) 98 98 98 100 98 98 98 98 100 100

dB(A) 70 70 70 72 70 70 70 70 72 72

l 8 8 8 8 8 8 8 8 8 8

gal 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1

Deutz F2M2011 F2M2011 F2M2011 F2M2011 F3M2011 F3M2011 F3M2011 F3M2011 F3M2011 F3M2011

2 2 2 2 3 3 3 3 3 3

r/min 2400 2400 2750 2750 2400 2750 2750 2300 2750 2750

kW 21.6 21.6 23.3 23.3 32.5 36 36 31.5 36 36

l 40 40 40 40 80 80 80 80 80 80

gal 10.57 10.57 10.57 10.57 21.13 21.13 21.13 21.13 21.13 21.13

XAHS 37- XAS 47- XAS 57 XAS 67-XATS 67 XAS 77- XAS 97

without brakes with brakes without brakes with brakes without brakes with brakes

fixed adjustable fixed adjustable fixed adjustable fixed adjustable fixed adjustable fixed adjustable

mm 2980 3257/3495 3093 3460/3628 3016 NA 3129 3496/3664 3016 NA 3129 3496/3664

inch 117 128/138 122 136/143 119 NA 123 139/144 119 NA 123 138/144

mm 1330 1330 1330 1330 1410 NA 1410 1410 1410 NA 1410 1410

inch 52 52 52 52 56 NA 56 56 56 NA 56 56

mm 1252 1252 1252 1252 1258 NA 1258 1258 1258 NA 1258 1258

inch 49 49 49 49 50 NA 50 50 50 NA 50 50

kg 720 725 755 770 880 NA 915 930 890 NA 925 940

lbs 1588 1599 1665 1698 1940 NA 2018 2051 1962 NA 2040 2073

kg 685 690 720 735 815 NA 850 865 825 NA 860 875

lbs 1510 1521 1588 1621 1797 NA 1874 1907 1819 NA 1896 1929

Unit dimensions

Box/Support Mounted XAS 47 - 57 XAS 67 - 77 - 97

Length (X) mm 1884 2018

inch 74 79

Width (Y) mm 960 1040

inch 38 41

Height (Z) mm 970/1227 970/1230

inch 38/48 38/48

Weight (ready-to-operate) kg 635/685 800/850

lbs 1400/1510 1763/1873

Weight (dry) kg 595/645 735/785

lbs 1311/1422 1621/1730

XAS 47 DdG 50 Hz Simultaneous XAS 67 DdG 50 Hz Simultaneous XAS 97 DdG 50 Hz Non-Simultaneous

110V1) 230/400V2) 110V1) 230/400V2) 230/400V2) 110V1) 230/400V2) 230/400V2)

kW/kVA 6 4 6 4 5.5 6 4 5.5

kW/kVA - 5.2/6.5 5.2/6.5 9.6/12 5.2/6.5 9.6/12

A 2x16+1x32 2x16+1x32 2x16+1x32

A 1 x 16 1 x 16 2 x 16 1 x 16 2 x 16A 2 x 16 2 x 16 1 x 16 2 x 16 1 x 16

X Y

B

C Z

7/28/2019 XA(T,H)S_37-97_en.pdf

8/8

YEAR

WARRANTY

OPTIONAL5YE

AR

Never use compressed air as breathing air without prior

purification in accordance with local legislation and standards.

The

face

ofinnovation

Protect your investmentand for your peace of mind

.

Atlas Copco carefully monitors the maintenance needs of all its compressors. Service intervals are

carefully assessed to ensure optimum performance is maintained and operating costs reduced.

Proper maintenance will ensure your compressor runs as efficiently and economically as possible.A lack of maintenance can result in expensive down-time with a subsequent loss of production or

poor performance. Avoid risks and protect the asset value of your compressor by choosing one of

the unique service options provided by Atlas Copco.

Our service options are flexible. Depending on your requirements, we can supply service kits or

spare parts for in-house maintenance or factory service and maintenance packages tailored to user

demands.

Genuine Parts

Atlas Copco makes no compromise on the quality of replacement parts: only genuine parts

provide the longevity and reliability you demand. Selected high quality Atlas Copco compressorand engine oils are also available. These meet the stringent quality specifications required to

enable your unit run smoothly, shift after shift.

Service agreements

For complete peace of mind, Atlas Copco has a range of service agreements to suit your needs.

Maintenance budgets are clear and simple, with prices fixed in advance. Operational costs come

down and efficiency goes up. You choose the service options and the time period to suit your

needs.

Commitment

Atlas Copco employs two thousand factory trained service technicians in over 150 countries

worldwide. Should a problem ever occur, access to their expertise is only a telephone call away.

With years of experience and ongoing investment, we are the only major compressor

manufacturer providing a full 3 year factory supported warranty.