1
2 3
XFP vs SFP+
XFP, SFP+ and 10-Gigabit Standards
XFP SFP+Abbreviation For 10 Gigabit Small Form Factor Pluggable Small Form-Factor Pluggable Plus
Data Rate 10G 6G/8.5G/10G
Standard XFP MSA Compliance with protocols IEEE 802.3ae, SFF-8431, SFF-8432
Size Bigger than SFP+ Small
Port Density Lower than SFP+ Greater than XFP
Functions Signal modulation, serial/deserialiser, MAC, clock and data recovery (CDR) and electronic dispersion compensation (EDC)
SFP+ transfer signal modulation, serial/deserialiser, MAC, clock and data recovery (CDR) and electronic dispersion compen-sation (EDC)
Related Terms Dual Fibre Dual Fibre
Single Fibre/WDM Single Fibre/WDM
CWDM CWDM
DWDM DWDM
Distance Supported 220m, 300m, 2km, 10km, 20km, 40km, 60km, 80km, 120km
220m, 300m, 2km, 10km, 20km, 40km, 60km, 80km
Working Wavelength 850nm/1310nm/1550nm 850nm/1310nm/1550nm
1270nm/1330nm 1310nm/1490nm/1550nm
1270nm - 1610nm 1270nm - 1610nm
ITU17 ~ ITU61 ITU17 ~ ITU61
Usage XFP transceivers widely installed in SDH/STM networks
SFP+ transceivers are more often used in Ethernet, Fibre Channel protocols
40GE Technology
AKA Wavelength Connector Medium Medium Type Max. Range
10GBASE-SR Short Reach 850nm XENPAK, X2, XFP, SFP+
Fibre Serial MM OM3: 300M, OM4: 400M
10GBASE-LR Long Reach 1310nm XENPAK, X2, XFP, SFP+
Fibre Serial SM 10km
10GBASE-ER Extended Reach 1550nm XENPAK, X2, XFP, SFP+
Fibre Serial SM 40km
10GBASE-LRM Long Reach MM 1310nm XENPAK, X2, SFP+
Fibre Serial MM 220m
SFP+ Direct Attach
DA, 10GBASE- SFP+ Copper Twinaxial 2-Pair 15m
10GBASE-T 8P8C Copper Class E channel using Cat6, Class Ea chan-nel using Cat6a or Cat7
55m (Cat6)100m (Cat 6a/7)
Media Converters
4 5
Dual Fibre to RJ45
Technical Specifications
Transmission Type 10/100/1000M FDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)
TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Transmission Distance(km) Multimode Dual-fibre 2Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Ordering Information
Description Part Number
Dual FO SC DX/RJ45 Media Converter SM 20km, W/ External Power 10/100/1000M W/ European Plug
SCD1RJEPGBSM20EU
Product Description
Briticom™ Dual FO to RJ45 Gigabyte Media Convert-ers adapts an ethernet to a multimode or a single mode signal to enhance the transmission distance in LAN installations.
Features & Benefits
� Built-in 2 port switch which supports flow and bandwidth control
� Full duplex utilises two fibre channels, one for transmitting and one for receiving
� Compliant to IEEE 802.3*, FCC and CE stan-dards
� Available with internal or external power supply
� Card-type and media racks also available
DUAl FIBRE TO 1X RJ45 - 10/100/1000M
Dual Fibre to RJ45
Product Description
Briticom™ Dual FO to RJ45 Ethernet Media Convert-ers adapts an ethernet to a multimode or a single mode signal to enhance the transmission distance in LAN installations.
Features & Benefits
� Up to 128Mbps data
� 550m for MM and to 120km for SM
� Full duplex: transmitter & receiver
� Built-in RAM
� Internal/external power supply
� Available in Card-type and media rack
� Built-in 2 ports switch supporting flow & bandwidth control
� Compliant to IEEE 802.3*, FCC and CE
DUAl FIBRE TO 1X RJ45 - 10 100M
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100M FDX
Bandwidth 128Mbps
Distance 550m~120km
Conformity FCC, IEEE 802.3*, CE
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Operating Humidity (%) 5 - 90
Power External DC5V 2A, Consumption 3.5W
LED indicator POWER (power supply) FX Link/ACT (fibre link/action) TX Link/ACT (RJ45 link/action) 100M, SD
Transmission Distance (km) Multimode Dual-fibre 2 - Single-mode Dual-fibre 20/40/60/80/120 - Category-5 twisted pair 100
Port RJ-45 Port: STP/UTP - Optical Port: SC ST FC
Ordering Information
Description Part Number
Dual FO SC DX to RJ45 Media Converter SM 20km, W/ External Power Supply10/100M W/ European Plug
SCD1RJEPMCSM20EU
6 7
Dual Fibre to RJ45
Technical Specifications
Transmission Type 1000M FDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)
TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Error Rate < 10-9
Transmission Distance(km) Multimode Dual-fibre 2Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: STP/UTP Cat5 Twisted Pair - Optical Port: SC ST FC
Ordering Information
Description Part Number
Dual FO SC DX/RJ45 Media Converter SM 20km, W/ External Power 1000M W/ European Plug
SCD1RJEPGB1SM20EU
Product Description
Briticom™ Dual FO to RJ45 Gigabyte Media Convert-ers adapts an ethernet to a multimode or a single mode signal to enhance the transmission distance in LAN installations.
Features & Benefits
� Built-in 2 port switch which supports flow and bandwidth control
� Full duplex utilises two fibre channels, one for transmitting and one for receiving
� Compliant to IEEE 802.3*, FCC and CE stan-dards
� Available with internal or external power supply
� Card-type and media racks also available
DUAl FIBRE TO 1X RJ45 - 1000M
Dual Fibre to RJ45
Product Description
Briticom™ Dual FO to RJ45 Ethernet Media Convert-ers adapts an ethernet to a multimode or a single mode signal to enhance the transmission distance in LAN installations.
Features & Benefits
� Built-in 2 port switch which supports flow and bandwidth control
� Full duplex utilises two fibre channels, one for transmitting and one for receiving
� Compliant to IEEE 802.3*, FCC and CE stan-dards
� Available with internal or external power
� Card-type and media racks also available
DUAl FIBRE TO 2-4X RJ45 - 10/100/1000M
Technical Specifications
Transmission Type 10/100/1000M FDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)
TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Transmission Distance(km) Multimode Dual-fibre 2Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: STP/UTP Cat5 Twisted Pair - Optical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
Dual FO SC DX/4 RJ45 Media Converter SM 40km, W/ External Power 10/100/1000M W/ European Plug
SCD4RJEPGBSM40EU
8 9
Dual Fibre to RJ45
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100M FDX
Wavelength (nm) 850~1625
Bandwidth 128Mbps
Data Buffer 128Kb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W (2 x RJ45) 5W (4 x RJ45)
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)
TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Transmission Distance(km) Multimode Dual-fibre 2Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: STP/UTP Cat5 Twisted Pair - Optical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
Dual FO SC DX/2 RJ45 Media Converter SM 20km, W/ External Power 10/100M W/ European Plug
SCD2RJEPMCSM20EU
Product Description
Briticom™ Dual FO to RJ45 Gigabyte Media Convert-ers adapts an ethernet to a multimode or a single mode signal to enhance the transmission distance in LAN installations.
Features & Benefits
� Built-in 2 port switch which supports flow and bandwidth control
� Full duplex utilises two fibre channels, one for transmitting and one for receiving
� Compliant to IEEE 802.3*, FCC and CE stan-dards
� Available with internal or external power supply
� Card-type and media racks also available
DUAl FIBRE TO 2-4X RJ45 - 10/100M
Dual Fibre to RJ45
Product Description
Briticom™ Dual FO to RJ45 Ethernet Media Convert-ers adapts an ethernet to a multimode or a single mode signal to enhance the transmission distance in LAN installations.
Features & Benefits
� Built-in 2 port switch which supports flow and bandwidth control
� Full duplex utilises two fibre channels, one for transmitting and one for receiving
� Compliant to IEEE 802.3*, FCC and CE stan-dards
� Available with internal or external power
� Card-type and media racks also available
DUAl FIBRE TO 2-4X RJ45 - 1000M
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 1000M FDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W (2 x RJ45) 5W (4 x RJ45)
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)
TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Transmission Distance(km) Multimode Dual-fibre 2Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: STP/UTP Cat5 Twisted Pair - Optical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
Dual FO SC DX/4 RJ45 Media Converter SM 40km, W/ External Power 1000M W/ European Plug
SCD4RJEPGB1SM40EU
10 11
Optical-Electrical-Optical (OEO)
Technical Specifications
Equipment Function 1R Repeater
Transmission Speed 9.95Gb/s-11.35Gb/s
Protocols SONET OC-192, SDH STM-64 (9.95Gbps)10G WAN (10Gbps)10G LAN (10.31Gbps)OTN OTU-2 (G.709) (10.70Gbps)10G LAN with 255/237 FEC coding (11.09Gbps)10G Fibre Channel (11.32Gbps)10G POS
Interface Type XFP to XFP
Transmission Distance XFP module: Up to 80Km
Maximum Packet Forwarding Rate 14,880,950/S
Power Requirement Rack-mountable: AC 85~220V OR DC -48VStandalone: AC 110~220V OR -48VPower consumption: ≤4W
Work Environment Operating Temp: 0~ 50°C Storage Temp: -10~ 70°CHumidity: 5%~90% (non-condensing)
Dimension Card: 11.5mm (W) × 78mm (D)Standalone: 156mm (W) × 128mm (D) × 32mm (H)
Ordering Information
Description Part Number
SFP SLOTS MEDIA CONVERTER OPTICAL-ELECTRICAL-OPTICAL 10GB
OEOGBMCXXXXXX
Product Description
Briticom™ 10 GB OEO Media Converters are used to switch high speed optical signals in fibre optic net-works by utilising WDM technology with electrical switching.
Features & Benefits
� Functions as a fibre mode converter or fibre repeater for long distance transmission
� For use with SFPs and supports hot-plugging
� Available with internal or external power supply
� Can be installed into a media converter chassis
� Supports Jumbo Frame
� Transparent Transport and very low delay
� Supports ITUT prescribed DWDM/CWDM wavelength
� Full State LED display
� Easy Installation
OEO MEDIA CONVERTER
Power Over Ethernet (PoE)
Product Description
Briticom™ Single-Mode to Multi-Mode Media Con-verters allow the switching of fibre types between two media converters. We offer these in both dual fibre to dual fibre and SFP to SFP types, to allow easier changes to the network.
Features & Benefits
� Up to 1.4Gbps data rate
� Transmissions available: 10/100M, 10/100/1000M or 1000M FDX/HDX
� Supports full and half duplex
� Transmission distances from 550m to 120km
� Built-in RAM for data buffer
� IEEE802.3af PoE PSE compatible
PoE MEDIA CONVERTER
Technical Specifications
Data 10/ 100 Mbps (802.3 10Base-T/802.3u 100Base-T)100Mbps (100Base-FX)
Input Voltage 100VAC to 240VAC
Input Frequency 47Hz to 63Hz
Pin Assignment and Polarity 4/ 5 (V+), 7/ 8 (V-)
Output Power Efficiency 75% min
Short Circuit Protection Auto recovery
Over Current Protection Auto recovery
Operating Temperature (°C) 0 to +50
Cooling Free air convection
Storage Temperature (°C) -20 to +85
Operating Humidity 90% max, non-condensing
Case Material Iron
Case Colour Black
Net Weight 540g Approx.
Dimensions (mm) 110 (W) x 40(H) x 140(L)
Connectors AC InletIEC-J-4LAN. Shielded RJ-45
Ordering Information
Description Part Number
PoE Dual FO SC DX/RJ45 Media Converter SM 40km, W/ External Power 10/100/1000M W/ European Plug
SCD1RJPOEGBSM40EU
12 13
Rack-Mount Media Converter Chassis
Technical Specifications
Capacity 17 Slots for up to 17 card-based media converters
Chassis Aluminium/Steel
Power Up to two power supplies Load-sharing, Hot-swappable, Rear-loading
Card Media Converters AdaptedStandalone Media Converters Adapted
10/100M10/100M, 10/100/1000M, 1000M
Power In AC 100V ~ 260V; Or DC 48V
Power Out DC 5V, 20A
Diameter of DC Plug 2.5/5.5mm
Ripple ≤50 Mv
Noise ≤50 Mv
Protection of Power Supply Circuit-breaker when overvoltage, Circuit-breaker when overflow, Cir-cuit-breaker when short circuit
Operating Temperature 0°C to 50°C
Storage Temperature 20°C to 85°C
Humidity 5% to 95%
Dimensions (mm) 485 (L) 231 (W) 90 (H); 19 Inches 2U
EMI FCC part 15 class a ROHS
Ordering Information
Description Part Number
MEDIA RACK CHASSIS 17 SLOT FOR CARD TYPE M. CONVERTERS WITH 2 POWER SUPPLIES AND FAN UNITS ETHERNET 10/100M
17SMCCHASSISE2U
Product Description
At Briticom™, we supply rack-mount Media Con-verter Chassis which are designed for the manage-ment of media converters within a cabinet.
Features & Benefits � For card-type and standalone media converters
� Up to 17 card-type media converters
� Internal power supply for card-type chassis’
� Mounting brackets for standalone media converters
� Redundant power supply (RPS) unit
� SNMP-ready
� Optional DC-48V Power Supply
� Supports up to 16 line-card media converters
� Two (2) loading-sharing, hot-swappable power sup-plies
� LED status panel for fan, Power and slot
� Supports mix-and-matching between 10/100-base, copper, fibre, single/multi-mode, WDM products with ST or SC connectors
� Ideal for mission-critical networks
MEDIA CONVERTER CHASSIS - CARD
Rack-Mount Media Converter Chassis
Product Description
At Briticom™, we supply rack-mount Media Con-verter Chassis which are designed for the manage-ment of media converters within a cabinet.
Features & Benefits � For card-type and standalone media converters
� Up to 17 card-type media converters
� Internal power supply for card-type chassis’
� Mounting brackets for standalone media converters
� Redundant power supply (RPS) unit
� SNMP-ready
� Optional DC-48V Power Supply
� Supports up to 16 line-card media converters
� Two (2) loading-sharing, hot-swappable power sup-plies
� LED status panel for fan, Power and slot
� Supports mix-and-matching between 10/100-base, copper, fibre, single/multi-mode, WDM products with ST or SC connectors
� Ideal for mission-critical networks
MEDIA CONVERTER CHASSIS - STANDALONE
Technical Specifications
Capacity 14 standalone media converters
Chassis Aluminium/Steel
Power Up to two power supplies Load-sharing, Hot-swappable, Rear-loading
Card Media Converters AdaptedStandalone Media Converters Adapted
10/100M10/100M, 10/100/1000M, 1000M
Power In AC 100V ~ 260V; Or DC 48V
Power Out DC 5V, 20A
Diameter of DC Plug 2.5/5.5mm
Ripple ≤50 Mv
Noise ≤50 Mv
Protection of Power Supply Circuit-breaker when overvoltage, Circuit-breaker when overflow, Cir-cuit-breaker when short circuit
Operating Temperature 0°C to 50°C
Storage Temperature 20°C to 85°C
Humidity 5% to 95%
Dimensions (mm) 485 (L) 231 (W) 90 (H); 19 Inches 2U
EMI FCC part 15 class a ROHS
Ordering Information
Description Part Number
MEDIA RACK CHASSIS 14 SLOT FOR STANDALONE M. CONVERTERS WITH 2 POWER SUPPLIES AND FAN UNITS 10/100/1000M
14SMCCHASSISGB2U
14 15
SFP to RJ45
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100/1000M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 100M, SD
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SFP SLOT TO 1 RJ45 MEDIA CONVERTER W/ EXTERNAL POWER 10/100/1000M W/ EUROPEAN PLUG
SFP1RJEPGBEU
Product Description
Briticom™ SFP to RJ45 Media Converters are used in the same way as Dual Fibre to RJ45 Media Con-verters – they can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling net-works.
Features & Benefits � Up to 1.4Gbps data rate
� Built-in 2 port switch which supports flow and band-width control
� SFP transceiver technology allows adaptions, with-out replacing media converters
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Card-type and media racks also available
1X SFP TO 1X RJ45 - 10/100/1000M
SFP to RJ45
Product Description
Briticom™ SFP to RJ45 Media Converters are used in the same way as Dual Fibre to RJ45 Media Con-verters – they can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling net-works.
Features & Benefits � Up to 128Mbps data rate
� Built-in 2 port switch which supports flow and band-width control
� SFP transceiver technology allows adaptions, with-out replacing media converters
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Card-type and media racks also available
1X SFP TO 1X RJ45 - 10/100M
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 128Mbps
Data Buffer 128Kb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, SD
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SFP SLOT TO 1 RJ45 MEDIA CONVERTER W/ EXTERNAL POWER 10/100M W/ EUROPEAN PLUG
SFP1RJEPETEU
16 17
SFP to RJ45
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 1000M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 100M, SD
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SFP SLOT TO 1 RJ45 MEDIA CONVERTER W/ EXTERNAL POWER 1000M W/ EUROPEAN PLUG
SFP1RJEPGB1EU
Product Description
Briticom™ SFP to RJ45 Media Converters are used in the same way as Dual Fibre to RJ45 Media Con-verters – they can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling net-works.
Features & Benefits � Up to 1.4Gbps data rate
� Built-in 2 port switch which supports flow and band-width control
� SFP transceiver technology allows adaptions, with-out replacing media converters
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Card-type and media racks also available
1X SFP TO 1X RJ45 - 1000M
SFP to RJ45
Product Description
Briticom™ SFP to RJ45 Media Converters are used in the same way as Dual Fibre to RJ45 Media Con-verters – they can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling net-works.
Features & Benefits � Up to 1.4Gbps data rate
� Built-in 2 port switch which supports flow and band-width control
� SFP transceiver technology allows adaptions, with-out replacing media converters
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Card-type and media racks also available
2X SFP TO 4X RJ45 - 10/100/1000M
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100/1000M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, SD
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
2SFP SLOT TO 4 RJ45 MEDIA CONVERTER W/ EXTERNAL POWER 10/100/1000M W/ EUROPEAN PLUG
2SF41RJEPGBEU
18 19
SFP to RJ45
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 128Mbps
Data Buffer 128Kb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 100M, SD
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
2SFP SLOT TO 4 RJ45 MEDIA CONVERTER W/ EXTERNAL POWER 10/100M W/ EUROPEAN PLUG
2SF41RJEPETEU
Product Description
Briticom™ SFP to RJ45 Media Converters are used in the same way as Dual Fibre to RJ45 Media Con-verters – they can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling net-works.
Features & Benefits � Up to 128Mbps data rate
� Built-in 2 port switch which supports flow and band-width control
� SFP transceiver technology allows adaptions, with-out replacing media converters
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Card-type and media racks also available
2X SFP TO 4X RJ45 - 10/100M
SFP to RJ45
Product Description
Briticom™ SFP to RJ45 Media Converters are used in the same way as Dual Fibre to RJ45 Media Con-verters – they can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling net-works.
Features & Benefits � Up to 1.4Gbps data rate
� Built-in 2 port switch which supports flow and band-width control
� SFP transceiver technology allows adaptions, with-out replacing media converters
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Card-type and media racks also available
2X SFP TO 4X RJ45 - 1000M
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 1000M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, SD
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
2 SFP SLOT TO 4 RJ45 MEDIA CONVERTER W/ EXTERNAL POWER 1000M W/ EUROPEAN PLUG
2SFP4RJEPGB1EU
20 21
Single Fibre to RJ45
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100/1000M HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Ordering Information
Description Part Number
SINGLE FO SC DX/RJ45 MEDIA CONVERTER SM 20KM, W/ EXTERNAL POWER 10/100/1000M W/ EUROPEAN PLUG
SCS1RJEPGBSM20EU
Product Description
Briticom™ Single Fibre to RJ45 Media Converters can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling networks.
Features & Benefits
� Transmission distances up to 120km
� Up to 1.4Gbps data rate
� Half duplex bi-directional fibre utilises WDM to trans-mit and receive through the same fibre
� Transmission distances from 550m to 120km
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Available with internal or external power supply
SINGLE FIBRE TO 1X RJ45 - 10/100/1000M
Single Fibre to RJ45
Product Description
Briticom™ Single Fibre to RJ45 Media Converters can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling networks.
Features & Benefits � Transmission distances up to 120km
� Up to 128Mbps data rate
� Built-in 2 port switch which supports flow and band-width control
� Half duplex bi-directional fibre utilises WDM to trans-mit and receive through the same fibre
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Card-type and media racks also available
SINGLE FIBRE TO 1X RJ45 - 10/100M
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100M HDX
Wavelength (nm) 850~1625
Bandwidth 128Mbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SINGLE FIBRE SC DX to 1 RJ45 Media Converter SM 20km, W/ External Power Supply10/100M W/ European Plug
SCS1RJEPMCSM20EU
22 23
Single Fibre to RJ45
Product Description
Briticom™ Single Fibre to RJ45 Media Converters can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling networks.
Features & Benefits � Transmission distances up to 120km
� Up to 1.4Gbps data rate
� Half duplex bi-directional fibre utilises WDM to trans-mit and receive through the same fibre
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Available with internal or external power supply
� Card-type and media racks also available
SINGLE FIBRE TO 1X RJ45 - 1000M
Technical Specifications
Cable SM or MM Fibre/Twisted Pair
Transmission Type 1000M HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SINGLE FIBRE SC DX to 1 RJ45 Media Converter SM 20km, W/ External Power Supply 1000M W/ European Plug
SCS1RJEPGB1SM20EU
Single Fibre to RJ45
Product Description
Briticom™ Single Fibre to RJ45 Media Converters can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling networks.
Features & Benefits � Up to 1.4Gbps data rate
� Half duplex bi-directional fibre utilises WDM to trans-mit and receive through the same fibre
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Available with internal or external power supply
� Card-type and media racks also available
SINGLE FIBRE TO 2-4X RJ45 - 10/100/1000M
Technical Specifications
2 x RJ45 4 x RJ45
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100/1000M HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H) 140(L)* 110(W) * 40(H)
Power Consumption 3.5W 5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A DC5V 3A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SINGLE FIBRE SC DX TO 4 RJ45 MEDIA CONVERTER SM 20KM, W/ EX-TERNAL POWER SUPPLY 10/100/1000M W/ EUROPEAN PLUG
SCS4RJEPGBSM20EU
24 25
Single Fibre to RJ45
Product Description
Briticom™ Single Fibre to RJ45 Media Converters can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling networks.
Features & Benefits � Up to 128Mbps data rate
� Half duplex bi-directional fibre utilises WDM to trans-mit and receive through the same fibre
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Available with internal or external power supply
� Card-type and media racks also available
SINGLE FIBRE TO 2-4X RJ45 - 10/100M
Technical Specifications
2 x RJ45 4 x RJ45
Cable SM or MM Fibre/Twisted Pair
Transmission Type 10/100M HDX
Wavelength (nm) 850~1625
Bandwidth 128Mbps
Data Buffer 128Kb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H) 140(L)* 110(W) * 40(H)
Power Consumption 3.5W 5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A DC5V 3A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SINGLE FIBRE SC DX to 2 RJ45 Media Converter SM 20km, W/ External Power Supply10/100M W/ European Plug
SCS2RJEPMCSM20EU
Single Fibre to RJ45
Product Description
Briticom™ Single Fibre to RJ45 Media Converters can convert an ethernet signal to a single-mode or multi-mode signal, to increase the distance of transmission in structured cabling networks.
Features & Benefits � Up to 1.4Gbps data rate
� Half duplex bi-directional fibre utilises WDM to trans-mit and receive through the same fibre
� Built-in RAM for data buffer
� Compliant to IEEE 802.3*, FCC and CE standards
� Available with internal or external power supply
� Card-type and media racks also available
SINGLE FIBRE TO 2-4X RJ45 - 1000M
Technical Specifications
2 x RJ45 4 x RJ45
Cable SM or MM Fibre/Twisted Pair
Transmission Type 1000M HDX
Wavelength (nm) 850~1625
Bandwidth 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H) 140(L)* 110(W) * 40(H)
Power Consumption 3.5W 5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A DC5V 3A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 1000M, TDX/COL
Error Rate < 10-9
Transmission Distance(km)(m)
Multi-mode Dual-fibre 2 Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: Connecting with STP/UTP Cat5 Twisted PairOptical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SINGLE FIBRE SC DX to 2 RJ45 Media Converter SM 20km, W/ External Power Supply 1000M W/ European Plug
SCS2RJEPGB1SM20EU
26 27
Singlemode to Multimode
Product Description
Briticom™ Single-Mode to Multi-Mode Media Con-verters allow the switching of fibre types between two media converters.
Features & Benefits
� Built-in 2 port switch which supports flow and band-width control
� Full duplex utilises two fibre channels, one for trans-mitting and one for receiving
� Compliant to IEEE 802.3*, FCC and CE standards
� Available with internal or external power
� Card-type and media racks also available
SINGLEMODE TO MULTIMODE - FIBRE
Technical Specifications
Transmission Type 10/100M, 10/100/1000M or 1000M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 128Mbps, 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 100M, SD
Transmission Distance(km)
(m)
Multi-mode Dual-fibre 2Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: STP/UTP Cat5 Twisted Pair-Optical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
SM TO MM SC DX Media Converter 2KM~40km, W/ External Power 10/100/1000M W/ European Plug
2SCDS/MEPGBSM40EU
Singlemode to Multimode
Product Description
Briticom™ Single-Mode to Multi-Mode Media SFP TO SFP Converters allow the switching of fibre types between two media converters.
Features & Benefits
� Built-in 2 port switch which supports flow and band-width control
� Full duplex utilises two fibre channels, one for trans-mitting and one for receiving
� Compliant to IEEE 802.3*, FCC and CE standards
� Available with internal or external power
� Card-type and media racks also available
SINGLEMODE TO MULTIMODE - SFP
Technical Specifications
Transmission Type 10/100M, 10/100/1000M or 1000M FDX/HDX
Wavelength (nm) 850~1625
Bandwidth 128Mbps, 1.4Gbps
Data Buffer 2Mb
Distance 550m~120km
Operating Temperature 0 to +70
Weight (kg) 0.2 (External Power), 0.4 (Internal Power)
Dimensions (External Power) (mm) 95(L) * 70(W) * 26(H)
Dimensions (Internal Power) (mm) 140(L)* 110(W) * 30(H)
Power Consumption 3.5W
Operating Humidity (%) 5 - 90
Power External DC5V 2A
LED indicator POWER (power supply) FX Link/ACT (fibre link/action)TX Link/ACT (RJ45 link/action) 100M, SD
Transmission Distance(km)
(m)
Multi-mode Dual-fibre 2Single-Mode Dual-fibre 20/40/60/80/120Cat5 Twisted Pair 100
Port RJ45 Port: STP/UTP Cat5 Twisted Pair-Optical Port: SC ST FC
Conversion Means Media Conversion, Store-and-Forward
Ordering Information
Description Part Number
2 SLOT SFP MEDIA CONVERTR 40KM, W/ EXTERNAL POWER 10/100/1000M W/ EUROPEAN PLUG
2SFPSEPGBMCEU
28 29
Switches Switches
Product Description
Briticom™ Switches are used to manage and deliv-er large amounts of multimedia, image, and video information across long distances.
Features & Benefits
� Supports IEEE 802.3, 802.3ab, 802.3z, 802.3u, 802.3x
� Up to 24 RJ45 or SFP ports
� Auto detect configuration for port speeds and duplex mode
� Web-based management provides the ability to com-pletely manage switches from a web browser
� Compatible with 10/100/1000Mbps Gigabit Ethernet signals
� Suitable for rack-mounting or stand alone
MANAGEABLE SWITCH
Technical Specifications
Data Transfer Rate
TP
Fibre
10/100/1000Mbps
1000Mbps
Cables/Fibres Max Distance
Multimode
Singlemode
Cat 5e and Above
Cat 3
220m
10 ~ 70km
100m (for 100Base-TX and 1000Base-T)
100m (for 10Base-T)
Duplex Mode Full for 1000 Base-SX/LX/T, Full/Half for 10/100Base-TX
MAC Address and Self-learning 8K MAC addresses and 4K VLAN table entries
Buffer Memory Embedded 144KB frame buffer
Flow Control IEEE 802.3x compliant for Full-duplex, Back pressure flow control for Half-duplex
Power Requirement 100~240V AC, 50/60Hz, max 13W consumption
Operating Temperature 0°C to 40°C
Humidity 5% to 90%
Safety Compliance FCC Class A, CE Mark Approval, RoHS Compliance
Ordering Information
Description Part Number
19’’ 1U 24 RJ45 TO 4 SFP SLOT GB SWITCH 1U24C4FOGBSXXX
30 31
Product Description
This Briticom™ 10G L3 Industrial PoE Switch uses top-rated 10G network switching chip, multiple lay-ers PCB design, as well as self-developed switch software system.
Features & Benefits
� High-performance of both hardware and software
� Supports the fast ring network protocol, free configuration
� Strong network security
� Convenient management and maintenance
16-PORT 10G L3 MANAGED CORE INDUSTRIAL POE
Switches
Technical Specifications
Ports 8*10/100/1000M PoE RJ45 ports
4*10/100/1000M RJ45 ports
4*10G SFP+ ports
Management port 1x Console port
Reset key 1x Reset key, for restore default settings
Switching Capacity 368G
PoE Feature IEEE802.3af/atSupport PoE management, PoE schedule, Information of PoE status
Packet Forwarding Rate 77.38Mpps @ 64byts
Operating temperature -40~+80°C
Input voltage AC: 110~240V/50~60Hz
Dimension / Weight 165*48*54mm / 1.1kg
Ordering Information
Description Part Number
16-PORT 10/100/1000 RJ45 & 4 SFP SLOTS10G L3 MANAGED CORE IN-DUSTRIAL POE SWITCH
POEIS16RJG4SFP10GML3
Switches
Product Description
Briticom™ Switches are used to manage and deliv-er large amounts of multimedia, image, and video information across long distances.
Features & Benefits
� Plug-and-play (PnP): Internet, IPTV and VoIP services can be deployed by one click on the NMS and on-site configuration is not required
� Remote diagnosis: Remote fault locating is imple-mented by the loop-line test of POTS ports call em-ulation and PPPoE dialup emulation initiated by the NMS
� Link monitoring: E2E link detection using 802.1ag Eth-ernet OAM
� High speed forwarding: GE line rate forwarding in the bridging scenario and 900Mbit/s forwarding in the NAT scenario
� Green energy-saving: 25% power consumption is saved with highly integrated system on chipset (SOC) solution, in which, a single chip integrates with PON, voice, gateway and LSW modules.
OPTICAL NETWORK UNIT ONT/ONU MODEL 1
Technical Specifications
Dimensions (W x D x H) 250 mm x 185 mm x 35 mm
Ports 1 POTS, 1 GE, 3 FE, 1 USB, 1 Wi-Fi
Average Power Consumption 8W
Operating Temperature 0⁰C ~ 40⁰CHumidity 5-95%
Power Supply 100-240V AC, 50-60 Hz
Adapter Output 11-14 V DC, 1A
Weight 500g (including power adapter)
Wi-Fi Standard 802.11b/g/n, certified by the Wi-Fi Alliance
Ordering Information
Description Part Number
FIBRE OPTIC ONU WITH 4 RJ45 PORTS, 1 PHONE PORT, 1 USB PORT, 1 FO PORT, WHITE UBIQUITI COMPATIBLE WITH POWER SUPPLY
ONU4R1T1U1FUQW
32 33
SFP Transceivers SFP Transceivers
Product Description
Briticom™ Small Form-Factor Pluggable (SFP) Fi-bre Optic Transceivers are used to interface net-working devices to fibre or copper networking ca-bles in telecom and data applications.
Features & Benefits
� Up to 1.25 Gb/s bi-directional data links
� Hot-pluggable SFP footprint
� Low power dissipation (1.05W typical)
� Compact RJ-45 connector assembly
� Fully metal enclosure, for lower EMI
� Single +3.3V power supply
� 10/100/1000 BASE-T operation in host systems with SGMII interface
COPPER SFP TRANSCEIVERS
Technical Specifications
Symbol Min. Type Max. Unit Notes
Line Frequency fL 125 MHz 5-level encoding, per IEEE 802.3
Tx Output Impedance Zout, TX 100 Ohm Differential, for all frequencies between 1MHz and 125MHz
Rx Input Impedance Zin, RX 100 Ohm Differential, for all frequencies between 1MHz and 125MHz
Single Ended Data Input Swing
Vinsing 250 1200 mV Single ended
Single Ended Data Output Swing
Voutsing 350 800 mV Single ended
Rise/Fall Time Tr, Tf 175 psec 20%-80%
Tx Input Impedance Zin 50 Ohm Single ended
Rx Output Impedance Zout 50 Ohm Single ended
Data Rate BR 10 1000 Mb/sec IEEE 802.3 compatible
Cable Length L 100 m Category 5 UTP. BER
I2C Clock Rate 0 100,000 Hz
Operating Temp.
T12-02-2 Tcase 0 70 ⁰C
T12-02-2E Tcase -10 80 ⁰C
T12-02-2A Tcase -40 85 ⁰C
Ordering Information
Description Part Number
RJ45 SFP MODULE 10/100/1000M SFPRJ45MGB
34 35
SFP Transceivers
Technical Specifications
Supply Voltage Vcc -0.5 ~ 4.5 V
Data Rate 155Mbps ~ 2.488Gbps
Average Output Power -10 Min ~ -3 Max dBm
Extinction Ratio ER 9 dB
TX Disable Vd 2.0 Vcc V
TX Enable Ven 0 ~ 0.8V
TX Fault VIf 2.0 VccHOST V
TX Normal Vin 0 ~ +0.8 V
LOS De-Assert LOSD -20dBm
LOS Assert LOSA -30dBm
LOS Hysteresis 1 ~ 4 dB
Data Output Swing Differential Vout 370 ~ 1800 mV
Temperature -20⁰C ~ +85⁰C
Ordering Information
Description Part Number
SFP TRANSCEIVER MODULE 1.25GBPS SM 20KM 125SFPSM20XX
Product Description
Briticom™ Small Form-Factor Pluggable (SFP) Fi-bre Optic Transceivers are used to interface net-working devices to fibre or copper networking ca-bles in telecom and data applications.
Features & Benefits � Support 155Mbps to 2.488Gbps multi-rate data links
� 850nm VCSEL laser and PIN photo detector
� Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
� Digital Diagnostic Monitoring: Internal Calibration or External Calibration
� 300m transmission with 50/125μm MMF
� Compatible with RoHS
� +3.3V single power supply
� Suitable for:
� 2X Fibre Channel
� Switch to Switch interface
� Switched backplane applications
� Router/Server interface
� Other optical transmission systems
SFP OPTICAL TRANSCEIVERS
SFP Transceivers
XFP BIDI OPTICAL TRANSCEIVERS
Product Description
Briticom™ Small Form-Factor Pluggable (SFP) Fi-bre Optic Transceivers are used to interface net-working devices to fibre or copper networking ca-bles in telecom and data applications.
Features & Benefits � Supports 9.95Gb/s to 11.3Gb/s bit rates
� 1330nm DFB Laser and PIN photo detector
� 1270nm DFB Laser and PIN photo detector
� Up to 10km transmission on SMF
� Power dissipation < 2W
� Single Power Supply: 3.3V
� No Reference Clock Required
� Compatible with RoHS
� Built-in Digital Diagnostic Functions
� Suitable for:
� 10GBASE-LR/LW 10G Ethernet
� SONET OC-192 SR-1
� SDH STM I-64.1
� 1200-SM-LL-L 10G Fibre Channel
� 10GBASE-LR/LW with FEC
� 1200-SM-LL-L 10G Fibre Channel with FEC
Technical Specifications
Supply Voltage Vcc 0 ~ 3.6 V
Data Rate 9.95 ~ 11.3 Gbps
Average Output Power -8 Min ~ 0.5 Max dBm
Extinction Ratio ER 3.5 dB
TX Disable Vd 2.0Vcc V
TX Enable Ven 0 ~ 0.8V
TX Fault Assert VIf 2.0 Vcc HOST V
TX Fault De Assert Vin 0 ~ 0+0.8 V
LOS De-Assert LOSD -16dBm
LOS Assert LOSA -20dBm
LOS Hysteresis 0.5 ~ 4.5 dB
Data Output Swing Differential Vout 340 ~ 850 mV
Temperature -10⁰C ~ +85⁰C
Ordering Information
Description Part Number
XFP MODULE TRANSCEIVER 10GB SM 40KM BIDI 10GXFPSM40BIDIXXX
36