63 BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
A
B
C PRE ENGINEERED BUILDING
Part II PLANT & MACHINARY
A)
B)
C) OTHER MACHINARY
Part III HT/LT POWER SUPPLY WORK
1.0 TRANSFORMER & HT/LT WORK
2.0
NAME OF WORK
Part - I CIVIL WORK
COLD STORE WITH PRECOOLING & RIPENING – A. MAIN BUILDING
1.0 – COLD STORE WITH PRECOOLING & RIPENING – B. ROAD WORK:
GRAND TOTAL COST OF (A + B) I.E MAIN BUILDING + ROAD WORK, Rs..
COLD STORE WITH PRECOOLING & RIPENING
INSULATED PANEL
REFRIGERATION SYSTEM
TOTAL OF PART II
RELATED ELECTRICALS FOR REF. SYSTEM
TOTAL OF PART III
GRAND TOTAL
63 BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
63 BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
64
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
Civil Works ( Banana Pack house )( The bidder must quote as per detailed specifications in the respective annexures with supply, installation, testing & commissioning. )
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATE
A - EARTH WORK.A-1 410 Cum.
A-2 200 Cum.
A-3 R.O Cum.
A-4 4 1500 Cum.
A-5 4 1500 Cum.
A-6 500 Sq M.
SUB TOTAL EARTH WORK. Total Rs.
Based on Basic Design & Layout by Consultant, the Architectural and Structural Designing of the Civil Works Up to Plinth are in the Scope of Work of the Bidder
ITEM CODE.
Excavation for foundation in earth, soils of all types sand, gravel and soft murum upto a depth of 1.5 M including removing the excavated material upto a distance of 100 m beyond the building area stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filing, ramming, watering (including shoring and strutting) etc. complete (Lift up to 2.50 m) Spec. No. BD.A. 1 Page No. 259.
Excavation for foundation in hard murum including removing the excavated material upto distance of 100 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring, strutting complete. (Lift upto 1.50 m.) Spec. No. : Bd.A 2 Page no. 259.
Excavation for foundation in hard rock by chiseling, weighing etc. including trimming and leveling the bed, removing the excavated material up to a distance of 100 meter beyond the building area and all lifts, stacking as directed, dewatering and back filling complete. (Lift up to 1.5 m.) Spec. No. Bd.A6. Page No. 260.
Back Filling in footing with approved excavated materials in 15 cm. To 20 cm. Layers including watering and compaction etc. complete. (above 1.50 Meters lift) Spec. No. 6 Page No. 15.Filling in plinth and floors with contractor's soil, sand or murum in 15 cm to 20 cm. Layers including watering and compaction etc. complete. Spec. No.7 Page No. 15
Providing dry trap / granite / quartzite / gneiss rubble stone soling in single layer of 23 cm. Thick below Plinth Concrete layer including hand packing and compacting complete. Spec. No. BD.A. 12. Page No.264.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
B - P.C.C. WORK.B-1 5.3.2 432 CUM
SUB TOTAL P.C.C. WORK.C - R.C.C. WORK.
C-1 5.3.2 110 CUM
C-2 5.3.3 CU.M
Basement 50 cumSuperstructure 6 cum
Providing and laying in situ cement concrete (150 mm thk.) M-10/1:3:6 of trap/granite/quartzite/gneiss metal for foundation including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etc. complete (4.42 bag/cum) Spec. No. 3 Page No. 17
Providing and laying in situ cement concrete M-20 of trap/granite /quartzite /gneiss metal for reinforced cement concrete work in foundation like footings of reinforced cement concrete columns and steel stanchion including bailing out water, form work, compaction and finishing, curing etc. complete. (Excluding steel reinforcement and structural steel) (7.60 bag/cum) Spec. No. 3 Page No. 17
Providing and casting in situ cement concrete M-20 of trap/granite/quartzite gneiss metal for reinforced cement concrete columns up to plinth level as per detailed designs and drawing or as directed including centering, formwork, compacting and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement) (7.60 bag/cum) Spec. No. : 4 Page No.17
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
C-3 5.4.1 92 CU.M
Basement 80 cum
C-4 5.4.1 70 CUM
C-9 5.4.10 45 M.T.
SUB TOTAL R.C.C. WORK. Total Rs.
Providing and casting in situ cement concrete M-20 of trap/granite/quartzite gneiss metal for reinforced cement concrete plinth beams as per detailed designs and drawing or as directed including centering, formwork, compaction and roughening the surface of special finishing to be proved and curing etc. complete (Excluding reinforcement). (7.60 bag/cum) Spec. No. 11 Page No.18
Providing and casting in situ cement concrete M-20 of trap/granite/quartzite /gneiss metal for reinforced cement concrete floor/ roof beams and slabs and landings as per detailed designs and drawings, including centering, formwork, compacting and roughening the surface if special finish is to be provided and curing etc. complete (Excluding reinforcement). (7.60 bag/cum) Spec No. 11. Page No. 18.
Providing and fixing in position Mild steel and H.Y.S.D. bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundation, slabs, beams, columns, canopies, stair case, newels, chajjas, lintels, pardis, copings, fins arches etc. as per detailed designs, drawings and schedules including cutting, bending, hookin the bars, binding with wires or tack welding and supporting as required complete. Spec. No. : 13. Bd.F17 Page No. 19
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
D - MASONRY WORK.D-1 6 152 CUM
D-2 6 110 CUM
D-3 6 70 SQM
D-4 18 600 SQM
Providing coursed brick masonry in cement mortar 1:6 in plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces and watering complete. Spec. No. 2 A Page No. 25.
Providing second class burnt Brick masonry with conventional/Indian standard type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding complete. Spec. No. 2B Page No. 25.
Providing second class burnt Brick masonry with conventional/Indian standard type bricks in cement mortar 1:6 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm. Diameter at every third course, property bent and bounded at ends including scaffolding racking out joints and watering complete. Spec. No. 9 Page No. 26.
Providing internal cement plaster 12 mm. Thk. In single coat in cement mortar 1:5 with neeru finishing to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No. : 1.III Page No. 54.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
D-5 18 335 SQM
D-6 18 1100 SQM
SUB TOTAL MASONRY WORK. Total Rs.
Providing internal cement plaster 12 mm. Thk. In single coat in cement mortar 1:5 without neeru finishing to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No. : 1.III. Page No. 54.
Providing sand faced plaster externally in cement mortar using Kharsalia / kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in cement mortar 1:4 using water proofing compound at 1 kg. Per cement bag, curing the same of the base than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 10 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Spec. No. 9 Page no. 55.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
E - FLOORING.E-1 2200 SQ.M
E-2 14 50 SQ.M
E-3 14 20 RM
E-6 RO SQ.M.
E-7 14 8 SQ.M.
E-9 14 450 SQ.M.
SUB TOTAL FLOORING. Total Rs.
Providing and casting in situ m-15 (1:2:4) grade light Reinforced Tremix Flooring 120 mm thick in Cold stores & grading packing hall including providing and binding in position reinforcements as directed. Casting floor concrete in bays by using girder, vibrator, vacuum departingmechanical trawling till perfectly leveled, smooth integrated cement finish is achieved, curing and making good, rate shall include cost of appropriate concrete hardener, expansion joints bituminous felt and excluding cost of reinforcement.
Providing and laying polished kotah stone flooring 25 mm to 30 mm thick and 4 cm. To 55 cm. Wide in plain pattern on a bed of 1:6 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. Spec. No. 18 Page No. 48.
Providing and fixing in required positions skirting or dado kotah stone slabs 25 mm. To 30 mm. Thick and 30 cm. Wide on 1:4 cement plaster including cement float, filling joints with neat cement slurry, curing, rubbing, polishing and cleaning complete. Spec. No. 17 Page No. 47.
Providing sills of polished kotah stone 25 mm. To 30 mm. Thick bed of 1:4 cement mortar including cement float, filling joints with slurry, curing, polishing and cleaning complete.Providing 25 mm./30 mm. Thick partitions of machine cut both side polished black/ brown Granite stone slab of approved shapes, quality and colour for urinals, including cutting holes of required size in the appropriate places to receive pipes etc. fixing in cement mortar 1:3 curing and cleaning complete. Spec. No. 17 Page No. 47.
Providing and fixing ceramic tiles of approved quality and size 7 mm thick for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing complete. Spec. No.18 Page No. 48.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
F- DOORS AND WINDOWS.F-1 10 6 SQM
11 sqm
F-2 0 5 SQM
F-3 0 18 SQM
Providing and fixing solid core flush door in single/double leaf 35 mm. Thick, decorative types, of exterior grade, as per detailed drawing including country teak wood door frame (100 mm x 80 mm ), approved P.V.C. laminate on both faces with/without glazing in the positions shown on the drawings or as directed, all necessary beads, moldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastening without/with brass mortise lock/aldrops, tadipatti, chromium plated handles on both sides etc. complete. (with door frame) Spec. No. 1. Page No. 33.
Providing and fixing waterproof marine flush door panels for bath and w.c. (8 nos.) with 1 mm thk laminate finish on both sides.Providing and fixing aluminium sliding window of various sizes as per detailed drawings fabricated powder coating with or without ventilator including fabrication, glazing with plain / clear glass panels of approved type and quality, all fixtures and fastening complete with guard bars 10 cm. center to center. Spec. No. 30. Page No. 37.
Providing and fixing rolling steel shutters fabricated from 18 gauge steel laths with side guides, bottom rail, brackets, door suspension shafts, including rolling springs, locking arrangements and housing box at the top including mechanical gear operating arrangement and one coat of red lead primer and two coat of enyamal paint of approved shade and quality. Spec. No. 5 Page No. 40.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
F-4 RO SQM
F-5 RO SQM
F-6 10 SQM
SUB TOTAL DOORS AND WINDOWS. Total Rs.H - COLOURING WORK.
H-1 19 1100 SQM
H-2 18 935 SQM
SUB TOTAL COLOURING WORK. Total Rs.
Providing and fixing mosquito proof and fly proof S.S. mesh to windows, ventilators with removable teak wood frame ( 25 mm x 50 mm ) including fixing of mesh of with teak wood lipping of 12 mm x 50 mm and including painting, l etc. complete. As directed by Engineer in charge.
Providing and fixing in position M.S. frame door shutters fixed with fly proof S.S. mesh as per drawing and design and complete with necessary chrome plated fittings and fixtures and three coats of oil paint etc. complete . As directed by Engineer in charge.(including teak wood frame)
Providing and fixing in position 8 S.W.G. wire weld mesh 50 x 50 mm jali in M.S. angle frame 50 x 50 x 5 as per drawing and design including one coat of primer and two coats of oil paint as per drawing and instructions of Engineer in charge.
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour over a coat of white wash on new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. Spec. No. 27 Page No. 58.
Providing and applying washable oil bound distemper of approved colour and shade to new surfaces in two coats over a primer coat including scaffolding, preparing the surfaces complete. Spec. No. 2. Page No. 56.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
I - ANCILLARY WORK.I-1 0 2400 SQM
I-15 12 SQM
SUB TOTAL ANCILLARY WORK. Total Rs.J - WATER SUPPLY AND SANITATION.
J-1 1 no.
J-2 1 no.
Providing preconstructional anti termite treatment to all excavated surfaces, back fill in immediate contact with foundation, and treating the top surface of plinth filling at the rate of 5 ltrs. Of emulsion concentrate of 0.5 percent of Chicropyriphox per Sq m. of surface area with ten years guarantee bond as per I.S. 6313 (part II) -1973 (as per item No. 22.41, 22,42 and 22,43 of schedule of rates of National Building Organization). Spec. Sr. No. 7 Page 68.
Providing and installing in position fabricated M.s. entrance gate (weight approx 50 kg/sq m) including I.S.J. side posts, heavy duty hinges, pad locks, and tower bolts and including three coats of oil paint to all steel surfaces all as per instructions of Engineer in charge.
Providing and hoisting in position 1 nos. of 10000 ltr capacity P.V.C. water tanks of approved quality and make over a brick masonry platform with plaster and top concrete complete with all necessary connections as per instructions of Engineer in charge.
Providing and constructing under ground R.C.C. water tank in M: 250 concrete as per design, inside dimension as 3.0 x 2.0 x 1.5 m with R.C.C. roof slab with inspection covers, central R.C.C. partition wall, smooth water proof plastering from inside and sand faced plastering from out side and with all necessary inlet and outlet pipe connections etc. as per design, drawing and instructions of Engineer in charge.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
J-3 24
a. For 50 dia. 'B' class G.I. Pipe line. 10 RMb. For 40 dia. 'B' class G.I. Pipe line. 20 RMc. For 25 dia. 'B' class G.I. Pipe line. 40 RMd. For 15 dia. 'B' class G.I. Pipe line. 60 RM
J-4
a. For 50 dia. Stop taps. 2 no.b. For 40 dia. stop taps 4 no.c. For 25 dia. Stop taps 6 no.d. For 15 dia. Stop taps. 4 no.
J-5 23 5 no.
Providing and fixing on walls / ceiling / floors, of Diameter given below 'B' class having embossed as ISI Mark galvanized iron pipes with screwed, sockets, joints and necessary galvanized iron fittings such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs etc. and remaking good the demolished portion to restore the same in original condition neatly and applying anti corrosive primer oil paint and two coats of all painting complete. Spec. No. 3 Page No. 69.
Providing and fixing screw down gun metal / brass wheeled stop taps of various diameters including necessary sockets, union nut complete.
Providing and fixing Orissa Pattern type white glazed earthenware 580 x 440 mm. Water closet pan including tarp cast iron soil and vent pipes upto the outside face of the wall, 1:2 lime concrete / 1:5:10 cement concrete bedding, 10 liters PVC low level flushing cistern with fitting, inlet pipe with stop tap / brackets for fixing the cistern, 32 mm. diameter P.V.C. flush pipe with fitting and cistern 20 mm. diameter P.V.C. overflow pipe with mosquito proof coupling and pull, painting of the cistern and pipes and cutting and making good walls and floors. Spec. No. 9. Page No. 70.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
J-6 23 1 no.
J-7 4 RM
J-8 2 no.
J-9 24 4 no.
J-10 24 2 no.
J-11
a. 100 dia. C.I. Pipe. 20 RMb. 80 dia. C.I. Pipe. 12 RM
Providing and fixing white glazed earthenware half stall type group of three urinals with cistern including P.C.C. soil pipe, C.I. Trap and soil pipe connection upto face of wall complete. Spec. No. As directed by Engineer in charge. Spec.Sr. No. 34 Page No. 74.
Providing and laying 100 mm. Diameter half round white glazed stone earthenware pipes in 1:5:10 cement concrete bedding including bends, necessary excavation etc. complete. As per instruction from ArchitectProviding and fixing white glazed earthenware wash Hand Basin of 55 cm. X 40 cm. Size including single cold water pillar tap / brackets, rubber plugs and brass chain, stop tap and necessary P.V.C. pipe connections including P.V.C. waste pipe and without bottled trap upto the outside face of the wall. As per instruction from Architect
Providing and fixing 10 cm. Cast iron Nhani Trap including grating, bend and piece of cast iron pipe upto the outsie face of the wall complete (with 45 cm. Arm). Spec. No. 8 Page No. 70.Providing and fixing 15 cm. Cast iron Nahani Trap including grating, bend and piece of cast iron pipe upto the outside face of the wall complete (with 45 cm. Arm). Spec. No. 8 Page No. 70.Providing and fixing of required diameter cast iron soil / vent / waste pipes with necessary fixtures and fitting such as bends, tees, single junction, double junction, slotted vent offsets on walls or in the ground including filling joints with lead with red lead oil paint coat and two coats of anti corrosive paint including fixing the pipe on walls by means of nails driven through lugs in wooden holder / battens and supported on ground floor by C.C. 1:2:4 of 30 cm. x 30 cm. size blocks complete.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
J-12 4 no.
J-13 4 RM
J-14 25 RM
J-15 6
Providing and fixing 15 cm. X 10 cm. Salt glazed stone ware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron grating for the gully trap, and precast R.C.C. cover with frame fixed with cement mortar.
Providing and laying 100 mm. Diameter salt glazed stone ware pipes including fittings such as bends, tees, single junction, double junctions, laying, jointing including excavation and refilling the trenches complete. As per instruction from Architect
Providing and laying R.C.C. concrete pipes of I.S. N.P. class of 150 mm. Diameter in proper line, level and slope including necessary collars, excavation, laying fixing with collars in cement mortar 1:1 etc. complete including excavation and refilling the trenches.
Providing and constructing Brick masonry in cement mortar 1:6 for Inspection Chamber various sizes given below including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels half round S.W.G. pipes, with plastering brick masonry inside and outside with cement mortar 1:4 and inside neat cement finish including 75 mm. thick R.C.C. cover etc. complete depth upto 1.20 m. Spec. No. 2. Page No. 25.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
a. 60 cm. X 45 cm. 4 no.b. 90 cm. X 45 cm. 1 no.
J-16 6 1 no.
J-17 1 no.
J-18 1 no.
SUB TOTAL WATER SUPPLY AND SANITATION. Total Rs.
TOTAL OF CIVIL WORK
Providing and constructing Brick masonry in cement mortar 1:6 for intercepting chamber 90 cm. X 45 cm. Including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels half round S.W.G. pipes, channels / half round glazed stone ware intercepting trap with roding pipe set in 1:4:8 C.C. block with plastering brick masonry inside and out side with cement mortar 1:$ and inside neat cement finish including 75 mm. thick R.C.C. cover etc. complete. depth upto 1.20 m. Spec. No. 2 Page No. 25.
Providing and fixing Hume pipe septic tank 900 mm. Diameter with vent pipe and cap including necessary fittings including excavation and laying. And constructing man holes chambers with cover on top of the septic tank openings. With plaster etc. complete. As per instruction from Architect
Providing soak pit of size 150 cm. X 150 cm. 150 cm. Including excavation and filling with brick bats. As per instruction from Architect
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
1.0 – COLD STORE WITH PRECOOLING & RIPENING – B. ROAD WORK:
SR. NO. DESCRIPTION OF ITEM QUANTITY UNIT RATE1 450 Cu.Mt
2 135 Cu.Mt
3 135 Cu.Mt
4 135 Cu.Mt
5 135 Cu.Mt
6 60 Cu.Mt
7 135 Cu.Mt
8 135 Cu.Mt
Excavation for roadway by manually in earth soil of all sorts sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. Supplying Soft murum at the road site including conveying & stacking complete.Supplying 15 cm to 23 cm trap/ granite/quartzite /gneiss stone rubble at the road site including conveying & stacking complete.Supplying 80mm trap/ granite/quartzite/ gneiss stone rubble at the road site including conveying & stacking complete.Supplying 60 mm trap/ granite/quartzite/ gneiss stone rubble at the road site including conveying & stacking complete.Supplying Soft murum at the road site including conveying & stacking complete.Spreading gravel/ sand / soft murum/ hard murum over rubble soling/ WBM surface etc complete. Laying 15 cm to 23 cm trap/ granite/ quartzite/ gneiss rubble soling including hand packing with rubble chips complete. Excluding cost of material.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
NO. DESCRIPTION OF ITEMS. QTY. UNIT RATEITEM CODE.
9 Spreading of 60mm/80mm metal including sectioning complete. 270 Cu.Mt10 900 Sqm
11 900 Sqm
12 900 Sqm
13 900 Sqm
14 900 Sqm
15 Carting of soil 300 Cum
B – ROAD WORK, RSGRAND TOTAL COST OF (A + B) I.E MAIN BUILDING + ROAD WORK, Rs..
Compacting murum (uo to 300mm loose) incuding artificial watering complete.Compacting the over size metal up to 200mm loose with vibratory roller incuding artificial watering complete. Compacting the size metal up to 100mm loose with vibratory roller incuding artificial watering complete. Providing & laying 75mm thk. Compected BBM over exisiting WBM surface including picking the road metalled surface thorughly cleaning the WBM surface by using mechanical broom or approved equipment, spreading 40mm size meatle (hand broken by bringing blasted rubble on site of work) at the rate of .09 cum/sqm compacting metale with roller & bitumen is then spred at the rate of 2 kg/sqm spreading 12mm meatle at the rate of 0.018 cum/sqm the surface shall be lightly rolled so that metal pieces gate embeded in the betumen layer & rolling shall continue untile entire surface is throughly compacted etc complete. With 60/70 grade
Providing 20mm thk. Premix bituminous carpet including supplying all materials, preparing & cleaning the base heating bitumen, applying tack coat at0.975 kg/sqm mixing hot bitumen and chips laying the carpet and compacting complete. With 30/40 grade
CIVIL WORKS FOR ONE COLD STORE WITH PRECOOLING & RIPENING
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
Civil Works ( Banana Pack house )( The bidder must quote as per detailed specifications in the respective annexures with supply, installation, testing & commissioning. )
AMOUNT
Based on Basic Design & Layout by Consultant, the Architectural and Structural Designing of the Civil Works Up to Plinth are in the
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
0
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
AMOUNT, RS
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
Qty. Unit Rate
1 1 Set
2
150 RMRO RM
3
2 No.
PART III – HT / LT POWER SUPPLY SYSTEM
1.0 – COLD STORE WITH PRECOOLING & RIPENING
Sr. No. Item description
Tapping of 11 KV power supply from MPEB OH line pole with HV cable-connection to line conductor, cable supports, GI pipe sleeve for cable protection, all required clamps, brackets, accessories, hardware, GI earth conductors, earthing, etc. complete as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements, including liasoning with MPEB and testing, approvals from all authorities concerned.All M.S. items to be duly painted with red-oxide zinc chromate primer and 2 coats of aluminium paint. Portions embedded in ground to be painted with 2 coats of bituminous paint.
11 KV, Aluminum conductor, XLPE insulated, PVC sheathed, screened, armoured cable as per IS, to be run on pole, laid in ready excavated trench / hume-pipe etc. including sealing of pipe-ends.
i) 3 C X 90 sq.mm.ii) 3 C X 120 sq.mm
11 KV Heat shrinking type termination for above cable including cable gland, cable lugs and all required accessories including earthing.
INDOOR: - i) 3 C X 90 sq.mm.
RO No.
2 No.1 No.
4 1 Job
5 1 No.
6 1 No.
ii) 3 C X 120 sq.mmOUTDOOR: - i) 3 C X 90 sq.mm.ii) 3 C X 120 sq.mm
MSEB approved outdoor compact type 11 KV metering cubicle having cable entry & termination arrangement for both incoming and outgoing connections. with 3 nos. CTs, 3 nos. PTs, arrangement for fixing electronic TOD meter, necessary terminal blocks, earthing terminals, mounting stand, foundation bolts, hardware, all accessories etc., earthing of CT, PT, body, cable armour etc. as per MPEB norms using black painted copper flat, complete as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements etc. including liasoning, coordination with MPEB and testing, approvals from all authorities concerned. Necessary cable-supports, pipe sleeve for cable, all required clamps, brackets, accessories, mounting structure, foundation bolts, hardware etc. shall also be provided.
Concrete foundation and grouting as required for metering cubicle with height above ground as per MPEB norms.
MPEB approved electronic TOD meter including liasoning, coordination etc. with MSEB and testing, approvals from authorities as required.
7 1 Job
2-pole structure with height / clearances as per rules, using RSJ 100 X 116 poles ( min. length 9 m.) with 10 mm. thk. base-plate in M20 PCC 1.5 mtr. deep foundation and 300 mm. dia. muffing, interconnection from metering cubicle, 1 set of 3 nos. 11 KV class lightening arrestors, 1 set of 11 KV, 200 Amp. single break vertically mounted A.B. switch, 1 set of 11 KV D.O. fuses with operating rod, interconnection from DOF to transformer with alkathyne pipe insulated conductor, 11 KV insulators as required, ACSR conductor as required, M.S. channels, cross-bracings, supporting structure and all required clamps, connectors, hardware, accessories, double earthing of 3 nos. LA, 4 P structure, GOD, DOF using 40 X 6 mm GI flat, complete as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements including liasoning, testing, approvals from all authorities concerned.All M.S. items to be duly painted with red-oxide zinc chromate primer and 2 coats of aluminium paint. Portions embedded in ground to be painted with 2 coats of bituminous paint
8a 1 No.
8b RO No.
315 KVA, 3 ph. 50 Hz. 11 KV / 433 V transformer as per IS : 2026 and other applicable standards, vector group Dyn11, with off-circuit tap change switch having constant KVA taps in 6 steps of 2.5 %, low loss grain oriented silicon steel laminations, copper wound with minimum class A insulation, ONAN cooling with maximum 50 / 55 deg. temperature rise of oil / winding, outdoor type HV bushings, LV cable box suitable for 2 nos. 3.5 C X 90 sq. mm. AYFY cables, outdoor type LV neutral bushing, radiators, fittings and accessories as per IS including conservator, local winding and oil temperature indicators etc. complete with first fill of oil as per IS : 335 with 10 % extra for topping up at site, double earthing of neutral and transformer body using 40 X 6 mm GI conductor etc. as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements, including liasoning, testing, approvals from all authorities concerned. The job includes the dismantling of the existing transformer at Indapur site and replacing it with new one as specified in the tender along with all necessary accessories. The bidder shall add on the charges for this work. Please note that the existing transformer is the property of MSAMB and must be handed over back to MSAMB in working condition.Same as (8a) above, but of rating 500 KVA and with LV cable box suitable for 3.5C X 150 sq.mm cable. x 3 nos..
9 1 No.
10
17 No.
4 No.
400 Amp. 3 pole ACB ( 50 KA ) with earth fault relay, ammeter, voltmeter & indicating lamps in outdoor weather-proof sheet-steel powder coated enclosure having canopy, with terminal extensions, cable entry & exit boxes suitable for 2 nos. 3.5C X 90 sq.mm AYFY incomimg cables as well as 2 nos. 3.5 C x 90 sq. mm. Outgoing cables, mounting structure, accessories, hardware etc. including mounting frame, concrete grouting, double earthing using 40 X 6 mm GI flat, complete as per statutory requirements for transformer LV isolation.
Earthing stations including test-link as per IS : 3043 using:
a) 600 x 600 x 6mm. GI plate electrode with 50 x 6 mm. GI strip upto ground level.
b) 600 X 600 X 3 mm. copper plate electrode with 25 X 3 mm. copper strip upto ground level for transformer neutral.
The earth electrode shall be buried at a depth of 3 m. below GL. The earth connection, test link, pipe and funnel shall be housed in a masonry chamber approximately 350 mm. length x 350 mm. wide x 300 mm. deep. The masonry chamber shall he provided with a cast iron ( CI ) cover resting over a CI frame embedded in masonry. The chamber top shall be atleast 100 mm. above the ground level. The earthing stations shall be complete as per applicable standards, rules, norms, guidelines. Minimum spacing between adjacent earth electrodes shall be 3 mtr. Earth electrodes shall be interconnected using 50 X 6 mm GI conductor buried in ground at a depth of 150 mm.
11 1 Set
12 1 No.
Switchyard fencing of 2.5 mtr. height comprising 8 SWG G.I. wire 40 mm. mesh chain link, vertical supports of 50 x 50 x 6 mm. MS angle at 2 mtr. interval, 40 x 40 x 5 mm. M.S. angle at top, middle and bottom so as to form a frame, 230 mm. thk. 400 mm. height brick wall duly plastered and painted, 2 nos. leaf type gates 3 mtr. wide, 2.5 mtr. height, made out of 40 mm. dia. G.I. pipe, 8 SWG GI chain link, M.S. angles etc. along-with locking arrangement and 2 nos. RSJ gate supports, earthing of fence vertical supports, gates etc. Fencing and gates shall be painted with red-oxide primer and 2 coats of aluminium paint. Supply, spreading and leveling of 40 mm. size, 150 mm. thk. stone gravel in fenced area is included. The clearances, fencing, gates, gravel etc. shall be as per applicable standards, rules, norms, guidelines of Electricity Board.
175 KVA, 3ph. & neutral, 50 Hz. 415V, 0.8 pf, heavy duty water-cooled Diesel - Generator of Kirloskar Cummins make set with cable box suitable for 2 no. 3.5C X 90 sq. mm. AYFY cable, neutral earthing terminal, heavy duty batteries, engine mounted alternator for battery charging, manual control panel, local indicators, fuel tank, channel base frame, anti-vibration pads, complete with all required equipment, accessories, fittings, controls, safety devices, exhaust piping, fuel piping, silencer, double earthing of neutral and body etc. as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements, including liasoning, testing, approvals from all authorities concerned.
13 1 Set
Main Power Distribution Board ( PDB): -Panel shall be totally enclosed cubicle type free standing, floor-mounting, compartmentalized and modular in construction, expandable on both sides, fabricated out of 14 gauge CRCA sheet steel duly pretreated and painted with 2 coats of red-oxide zinc-chromate primer and painted with synthetic enamel paint or powder coated.Panel shall have separate MSEB / DG supply change-over & incomer section with door interlock and isolated horizontal / vertical bus-bar chambers. Bakelite / acrylic shrouds with danger lables shall be provided as required to cover live parts and busbars for safety purpose. Separate cable-alleys shall be provided. Component layout in individual modules shall be spacious with adequate clearances for ease of operation and maintenance. Capacitor modules when provided shall have adequate cooling arrangement such as louvres at rear and sides. Cable entry shall be top or bottom as per site conditions. Aluminium anodized labels shall be provided for components and feeders. 40 x 6 mm GI earth busbar shall be provided along panel length with terminals brought out at both ends. Necessary foundation frame / pedestal / mounting structure, sheet metal blanking covers, foundation bolts and all required material / accessories etc. shall be included.Vendor shall submit detailed SLD, G.A. & dimensional drawings, BOM and wiring diagram for Owner's approval. Panel shall be manufactured and tested in an approved manner as per IS:8623 and other applicable standards.MCC shall consist of following feeders:
A . Change-over section
(i) 400 Amp four pole switch-fuse load-break change-over switch with suitable cable-entry and termination arrangement for 2 nos. 3.5 C X 90 sq. mm. AYFY cables each for MSEB and DG supplies.(Total 2 nos. cables) - 1 no.
(ii) 3 Nos. supply on LED type indication lamps with 3 Nos. HRC fuses for MSEB and DG supply on indication. – 2 sets(iii) 315 / 5 Amp., 10 VA Y-ph. CT on MSEB supply side for APFC panel - 1 no.B. Incomer(i) 400 Amp ACB ( 50 KA ) with OL, SC, EF protections, operating handle and door interlock, etc.- 1 no.(ii) 0 to 500 V voltmeter, voltmeter selector switch, 3 Nos. HRC fuses etc. – 1 set
(iii) 0 to 200 Amp. ammeter, ammeter selector switch, 3 Nos. 630 / 5 Amp., 10 VA CTs, shorting links etc. – 1 set(iv) Copper neutral link - 1 no.(v) Busbars – 1 set
50 X 6 mm. main copper busbars with red, yellow, blue, black colour heat shrinkable PVC sleeves and mounted on epoxy / SMC insulator supports of tested quality as per IS. Other vertical copper busbars shall be rated for total compartment rating with current density of 1.5 Amp. per sq. mm. Minimum size 50 X 6 mm.Minimum clearance on all sides of each busbar shall be 25 mm.C. Outgoing Feeders
14 1 Set
Cables / wires used for switchgear power connections shall be PVC insulated multi-strand copper conductor as per IS with current rating atleast 40% more than feeder FLC. Minimum wire size shall be 2.5 sq. mm. ( to be used upto 16 Amp. MCB feeder). For feeder rating above 63 Amp, busbars shall be used.
(i) 200 Amp TP MCCB with protections, operating handle and door interlock . neutral link etc. for machine room, and refrigeration systems – 1 nos.
(ii) 63 Amp MCB with protections, operating handle and door interlock . neutral link etc. for Air conditioning system – 1 no.(iii) 100 Amp. MCB with protections, operating handle and door lock, neutral link etc for Grading & Packing Hall.(iv) 100 Amp MCB with protections, operating handle & door lock, neutral link etc for complete lighting.(v) 63 Amp. MCB as spareLT Capacitor APFC PanelAutomatic power factor correction compartmentalized, modular, cubicle type totally enclosed panel generally as per main PDB specification as under:A) Incomer :(i)150 Amp MCCB with OL,SC protections, operating handle, door interlock etc. – 1 no.
(ii) Supply on LED type indication lamps with HRC fuses – 3 nos.(iii) Auto / Manual switch – 1 no.(iv) APFC relay (Syntron / Sycon make) – 1 no.(v) 0-60 sec. Timer for manual operation – 1 set
15
100 M50 M50 M
1000 M1500 M
(vi) 0 to 500 V voltmeter, voltmeter selector switch, 3 Nos. HRC fuses etc.- 1 set
(vii) 0 to 160 Amp. ammeter, ammeter selector switch, 3 Nos. 200 / 5 Amp., 10 VA CTs, shorting links etc – 1 set.(viii) TPN Copper busbars 40 X 6 mm – 1 set(ix) Copper neutral link – 1 no.( x) Other components, fans etc. for completion - LotB) Outgoing Feeders:
i) 200 Amp auto switch with contactor for Tranformer – 1 no.C) Capacitor modules
(i)25.0 KVAR capacitor module with capacitor, 63 Amp. SFU ( fuse rating as per capacitor mfr. recommendation), 63 Amp. contactor, start, stop push-buttons, indication lamp, control fuse switchgear, other components etc. – 6 nos.(ii) 25 KVAR capacitor module as above but without capacitor bank - 2 nos.
1.1 KV grade PVC insulated, PVC sheathed, muilti-strand Al or Cu conductor as specified, armoured cables as per IS : 1554, to be laid in excavated trenches, hume pipes, readymade cable trenches, cable trays, on wall/structure with necessary dressing,clamping, cleating, tagging etc.
a) 3.5C X 90 sq.mm. - Aluminiumb) 4 C X 6 sq.mm. – Copperc) 4C X 4 sq.mm. – Copperd) 4C X 2.5 sq.mm. – Coppere) 4 C x 1.5 sq. mm. – Copper
16
8 No.10 No.10 No.75 No.RO No.
17
100 M150 M75 M
LT cable end termination using heavy duty crimping type lugs, bi-metal treatment in case of connection between dissimilar metals,, brass nickel plated double compression cable glands, PVC tape, PVC sleeves etc.
a) 3.5C X 90 sq.mm. - Aluminiumb) 4 C X 6 sq.mm. – Copperc ) 4C X 4 sq.mm. – Copperd) 4C X 2.5 sq.mm. - Coppere) 3 C x 1.5 sq. mm. – Copper
14 gauge GI trays with galvanizing as per IS : 2629, IS : 2633, IS : 4759 etc. to be mounted in trenches, wall, beam, structure etc. including accessories, hardware, anchor fasteners, brackets, supports etc. as per site requirement. Tray sizes as under :
a) 300 mm – perforated type with GI coverb) 150 mm – perforated type with GI coverc) 100 mm – perforated type with GI cover
18
80 M40 MRO M400 M
Earthing as per IS : 3043 using conductors of following sizes inclusive of brazing, welding, jointing, clamping, hardware, bituminous paint at joints, connection to equipment and all required material, to be laid in outdoor trench at a depth of minimum 600mm, indoor in conduit, trays or on floor / wall / ceiling / roof / structure etc. with clamping at 500 mm. intervals. All electrical equipment, metal casings, frames, electrical panels, lighting panels, crane rails, tracks, metal pipes, conduits, cable trays etc. shall be earthed at two points. Steel columns, metallic staircases, ladders, hand rails etc. shall be earthed using single earth conductor bonded to each component with ends connected to two different points of the earth grid. Metallic sheaths, screens, armour of cables shall be earthed at both ends of cable. Lighting fixtures, fans, switch-sockets, switch-GAIC, junction boxes etc. shall be earthed by means of separate earth continuity conductor to be run along lighting cable, conduit, casing-caping etc. Neutral connections and metallic conduits / pipes shall not be used for equipment earthing.(Note : Sub-station earthing not included under this item as it is covered under resp. items)
a) 50 x 6 GI stripb) 25 x 3 Copperc) 8 SWG GI wired ) 12 SWG GI wire
19
1 No.
40 M
Lightening protection system for building as per IS : 2309 inclusive of brazing, welding, jointing, clamping, hardware, bituminous paint at joints, complete as per applicable standards, rules, norms, guidelines etc., comprising of :
a) Vertical air terminals including rigid and strong mounting arrangement to sustain all weather conditions, wind load etc. and all required material.
b) Horizontal / Vertical roof top conductor 25 x 3 mm. copper fixed on insulated supports at 750 mm interval along building peripheryAll metallic items within a radius of two metres shall be bonded to the lightening protection conductor. Lightning down conductors shall be directly connected to earth electrodes with minimum bends. All joints shall be of brazed type. Down conductors shall not be connected to other earthing conductors above ground level.
20 1 Set
21
100 No.
40 No.
Lighting panels ( LP )(i) 50 Amp. 4 P-ELMCB as incomer and 10 Amp. SPMCB - 10 nos. as outgoing feeders for COLD STORE WITH PRECOOLING & RIPENINGs– 3nos.(ii) 40 Amp. 4P-ELMCB as incomer and 10 Amp. SPMCB - 12 nos. as outgoing feeders for Office, Store, & Machine room – 2 no.iii) 50 Amp. 4 P ELMCB as incomer and 10 Amp. SPMCB for Grading Hall & Despatch dock – 1 nos.iv) 40 Amp. 4P ELMCB as incomer and 10 Amp. SPMCB for Ante rooms 1 & 2 – 2 nos.LPs shall be with IP:42 protection, factory fabricated out of CRCA sheet, powder coated, with metal door, top and bottom removable gland plates, universal mounting, complete with copper busbars, earth bus, terminals for looping, cable-ties, shrouds to cover live terminals, front blanking plate with cutout for MCB operation and all accessories etc. Rate shall be inclusive of mounting structure and all required material for installation.Lighting Fixtures / fans a) 1 x 40 W general purpose box type channel tube fittings with transparent acrylic cover, lamp, mounting hardware, JB for looping, and all accessories for packing hall
b) 2 x 40 W general purpose box type channel tube fittings with transparent acrylic cover, lamp, mounting hardware, JB for looping, and all accessories for packing hall
4 No.
25 No.
4 No.
22
10 No.
10 No.
c) Self - contained emergency light unit 20 W with sealed re-chargeable battery, battery-charger etc. complete in all respects for automatic switch on in case of supply failure.d) Ceiling fan 1200 mm. size with regulator and all accessories including anchor fastener with fan-hook in ceiling.e) Exhaust fan 450 mm. size including mounting frame, hardware and all accessories etc.
Note : Above rates shall be inclusive of all required material / accessories eg GI pipe brackets, clamps, M.S. conduit-pipes for suspension, ball- socket joints, three point ceiling- roses, junction-boxes, PVC / wooden mounting blocks etc.
Street light fixtures (i) 150 W HPSV outdoor type weather proof cast aluminium enclosure light fixture with lamp, ballast,capacitor and all required accessories, hardware etc. for pole mounting
(ii) 9 mtr. swaged type medium gauge welded pole as per IS with base plate, earthing stud, junction-box with MCB, terminals etc., 1 mtr. length lamp bracket, pole cap, wiring from jb to lamp using 2.5 sq.mm. PVC insulated flexible copper wire etc. complete for 150 W HPSV lamp fixing.
23 125 No.
24 10 No.
25
2 No.
Point wiring from Grading hall LP to switch-board to light / fan-points in PVC conduits on wall / ceiling inclusive of mains, sub-mains, sunmica top wooden switch-board with 5 Amp. piano switch for each light fixture, 650 V grade PVC insulated flexible copper wires as specified below etc. 14 SWG copper earth wire to be used from sw. board to fitting. Rate shall be inclusive of conduit accessories, clamps, saddles, junction boxes, spacers and all required material.
Note : 1 no. 5amp. 5 pin plug-socket & piano-switch shall be provided on each switch-board and shall be considered as half point and paid at half the unit rate.
Wire Sizes(i) LP to sw. board - 3 nos. 2.5sq.mm.(ii)Sw. board to light –2 nos. 1.5 sq.mm.Neutral for individual circuit shall be run separately.Colour code:- Ph-Red, Neutral - Black, Earth- Green
1 ph. 5 Amp. 2 pin / 3 pin plug socket with piano-switch on sunmica top wooden board including wiring in PVC conduit as per Item ( 24a ) above in Grading hall & Anter ooms & Reception areas ).
63 Amp. TPN + E metal-clad industrial plug socket DB with 63 Amp. 4P-MCB in sheet metal box for welding / miscellaneous sockets
265 No.
27
RO MT
28
RO MRO MRO MRO M
29 5 No.
30 RO M
31 RO No.
32
1 Set
1 ph, 16 A metal-clad 3 pin plug socket DB with 16 A DPMCB in sheet metal box for utility power sockets in machine rooms
Structural steel for cable supports, base frames, mounting frames, brackets, various other supports, miscellaneous requirements etc. The maximum sizes of sections shall be as under.a) ISMC 100b) ISA 75 X 75 X 6c) 25 X 6 mm M.S. flatd) 6 mm. thk. chequered plateHume pipes of following ID to be laid below ground including jointing and sealing of ends to prevent water ingress
a) 300 mm.b) 250 mm.c) 200 mm.d) 150mm.Providing man hole with masonry chamber and CI cover for laying or withdrawal of cables in hume pipes.
Providing and laying in 600 mm. (W) X 1000 mm. (D) trench with sand layer 150 mm. thick and single brick layer on cable top including refilling the trench, levelling and providing metal cable markers at 3 mtr. intervals.Taking 6 inch bore in rocky soil upto minimum 3 mtr. depth or as required for GI pipe earth electrode.Fire Fighting and Safety equipment
a) Fire fighting system as per statutory requirement of fire fighting & safety department with provision of latest equipments.
5 No.
2 Set
1 Set
2 No.
2 No.
2 No.
2 No.
2.0
Qty. Unit
1 1 Set
b) Portable 5 kg capacity dry type fire extinguisher suitable for electrical fire as per IS and as recommended by TAC.
c) Floor mounted bucket stand with 4 nos 13 litre buckets hung on hooks. The stand shall be 1.5 m L x 1.0 m H made out of MS angle frame duly painted with red oxide primer and 2 coats of red colour finish paint.d) Antiskid chequered type 415 V grade black rubber mat 1000 mm wide as per IS 5424 for panels, switches etc.
e) First aid box with contents as per standard requirements.f) Shock treatment chart in English, Hindi and Gujarati with wooden frame and glass cover.
g) Metallic permanently inscribed danger. GAIC 11 KV and 415 V.h)Insulated hand gloves pairs 11 KV and 415V .
TOTAL, RS.TOTAL IN WORDS:
RELATED ELECTRICALS FOR REFRIGERATION SYSTEM: -
Sr. No. Item description UnitRate, Rs.Main Power & Motor Control Panel (PMCP)
1 1 Set
Panel shall be totally enclosed cubicle type free standing, floor-mounting, compartmentalized and modular in construction, expandable on both sides, fabricated out of 14 gauge CRCA sheet steel duly pretreated and painted with 2 coats of red-oxide zinc-chromate primer and painted with synthetic enamel paint /powder coated.
Panel shall have separate incomer section with door interlock and isolated horizontal / vertical bus-bar chambers. Bakelite / acrylic shrouds with danger ouver shall be provided as required to cover live parts and busbars for safety purpose. Separate cable-alleys shall be provided. Component layout in
individual modules shall be spacious with adequate clearances for ease of operation and maintenance. Capacitor modules when provided shall have adequate cooling arrangement such as ouvers at rear and sides. Cable entry shall be top or bottom as per site conditions. Aluminium anodized labels shall be provided for components and feeders. 25 x 6 mm GI earth busbar shall be provided along panel length with terminals brought out at both ends. Necessary foundation frame / pedestal / mounting structure, sheet metal blanking covers, foundation bolts and all required material / accessories etc. shall be included.
Blank modules - 3 Nos. blank modules without any components suitable for 3.7 K.W. motor starters shall be provided.
1 1 Set
Vendor shall submit detailed SLD, G.A. & dimensional drawings, BOM and wiring diagram for Owner’s approval.
Panel shall be manufactured and tested in an approved manner as per IS:8623 and other applicable standards.Panel shall consist of following feeders:(i) Incomer 125 Amp TPN with fuses, operating handle and door interlock, etc. – 1 no.(ii) 0 to 500 V voltmeter, voltmeter selector switch, 3 Nos. HRC fuses etc. – 1 set(iii) 0 to 200 Amp. Ammeter, ammeter selector switch, 3 Nos. 315 / 5 Amp., 10 VA CTs, shorting links etc. - 1 set
(iv) Supply on LED type indication lamp with HRC fuse etc. - 1 set
(v) Copper neutral link - 1 set (vi) Busbars – 25 X 6 mm. Main copper busbars with red, yellow, blue, black colour heat shrinkable PVC sleeves and mounted on epoxy / SMC insulator supports of tested quality as per IS. Other vertical copper busbars shall be rated for total compartment rating with
current density of 1.5 Amp. Per sq. mm. Minimum size 25 X 3 mm.
Minimum clearance on all sides of each busbar shall be 25 mm.
(Incoming cable size 95 sq. mm x 3.5 C AYFY Outgoing Feeders - 1 seta) Motor rating upto 7.5 KW
1 1 Set
- DOL starter comprising of TP-MCB, SPPR (only for compressor and condensor motors), 1 no. contactor, 1 no. OLR, control MCB, start / stop push-buttons, selector-switches, motor ON indication lamp, terminals etc.
b) Motor rating above 7.5 KW - Star delta starter comprising of TP-MCB, SPPR (only for compressor and condensor motors), 3 nos. contactors, 1 no. OLR, electronic star delta timer, control MCB, start / stop push-buttons, selector-switches, motor ON indication lamp, terminals etc.
c) TP-MCB shall be suitable for motor duty and rating shall be co-ordinated with OLR rating as per manufacturer’s recommendations.
j) Contactor shall be AC3 duty with current rating atleast 10% more than motor FLC. Minimum contactor rating 12 amp.- OLR shall have SPP feature with maximum setting at-least 10% more than motor FLC.- Cables / wires used for switchgear power connections shall be PVC insulated multi-strand copper conductor as per IS with current rating atleast 40% more than feeder FLC. Minimum wire size shall be 2.5 sq. mm. ( to be used upto 3.7 KW).
Feeders as reqd. for following systems 1) 7.0 TR x 2 nos. ref. System for pre-cooling - 2 sets 2) 4.5 TR x 1 nos. ref. System for each COLD STORE WITH PRECOOLING & RIPENING I - 1 set
1 1 Set
2 1 Set
3 1 Set
2a) 5.0 TR x 4 nos. ref. system for each ripening chamber - 4 sets
3) Air –curtains - 4 Nos.4) 4P- MCB feeder for ref. Van socket – 1 no. 5 ) 32 Amp. – 1 no.6) 4P- MCB feeder for lighting - 32 Amp – 1 no.7) 4P – MCB feeder spare - 32 Amp.- 1 no.8) Any other motor, 4P-MCB and DP-MCB feeders as per system reqmt.9) MCBs, relays, timers, switches, push-buttons, indication lamps, alarms, controls, instrumentation, necessary circuitry etc. as per system requirement for control and interlocking of compressors, fans, pumps, solenoid valves, level switches, pressure switches, heaters etc. – 1 set as required
TPN isolators (MCB type) suitable for motor duty in outdoor type metal enclosure for motors located outside machine room. – 1 set as required
1.1 KV grade PVC insulated, PVC sheathed, Al or Cu stranded conductor as specified, armoured cables as per IS : 1554, to be laid in readymade cable trenches, cable trays, on wall / structure with necessary dressing, clamping, cleating, tagging etc. including necessary material. – 1 set as required
a) 2C X 1.5 sq.mm – Copper ( lighting fixtures, alarm system and misc. 1 ph. Small power reqmt. Eg. Solenoids)b) 2C X 2.5 sq.mm – Copper c) 3C X 2.5 sq.mm. – Copper ( 1 run for motors upto 3.7 KW, lighting panel, switch-board and 1 ph. 15 A sockets in refrigerated areas )
3 1 Set
4 1 Set
d) 3C X 4 sq.mm. – Copper ( 1 run for motors upto 7.5 KW – DOL and 2 runs for motors upto 12.5 KW - SD)e) 3C X 6 sq.mm. – Copper ( 2 runs for motors upto 15 KW - SD)
f ) 3C X 16 sq.mm – Aluminium ( 2 runs for motors upto 22 KW - SD)
1) 4C X 2.5 sq.mm. – Copper 2) 4C X 4 sq.mm. – Copper
I ) 4C X 6 sq.mm. – Copper ( for ref . van socket )j ) 4C X 16 sq.mm – Aluminium
3) 4C X 25 sq.mm – Aluminium l ) Any other power cables as per scope and system reqmt.
m) Copper control cables of size 1.5 sq. mm. As per system reqmt.
n) Instrumentation cables as per system reqmt.LT cable end termination using heavy duty tinned copper lugs, brass nickel plated double compression cable glands, PVC tape, PVC sleeves etc.
a) 2C X 1.5 sq.mm – Copper b) 2C X 2.5 sq.mm – Copper c) 3C X 2.5 sq.mm. – Copper d) 3C X 4 sq.mm. – Copper e) 3C X 6 sq.mm. – Copper f ) 3C X 16 sq.mm – Aluminium
4) 4C X 2.5 sq.mm. – Copper 5) 4C X 4 sq.mm. – Copper
I ) 4C X 6 sq.mm. – Copper j ) 4C X 16 sq.mm – Aluminium
6) 4C X 25 sq.mm – Aluminium
4 1 Set
5 1 Set
6 1 Set
l ) Any other power cables as per scope and system reqmt.
m) Copper control cables of size 1.5 sq. mm. As per system reqmt.
n) Instrumentation cables as per system reqmt. – 1 set14 gauge GS perforated trays of required sizes with accessories, to be mounted in trenches, or on wall, beam, structure including steel supports, hardware, anchor fasteners etc. as per site requirement.. – 1 set
Earthing as per IS : 3043 using conductors of following sizes inclusive of brazing, welding, jointing, clamping, hardware, bituminous paint at joints, connection to equipment and all required material, to be laid along conduit, trays or on floor / wall / ceiling / roof / structure etc. with clamping at 500 mm. Intervals. All electrical equipment, metal casings, frames, electrical panels, crane rails, tracks, metal pipes, conduits, cable trays etc. shall be independently earthed at two points. Metallic sheaths, screens, armour of cables shall be earthed at both ends of cable. Neutral connections and metallic conduits / pipes shall not be used for equipment earthing.
a) 32 x 6 mm GI strip (MCC panel )b) 25 x 3 mm GI strip ( Sub-grid along cable-trays, motors above 3.7 KW upto 30 KW, MCB-DBs, lighting panels etc. )c) 8 SWG GI wire ( motors upto 3.7 KW, power isolators, JBs, lighting
poles etc.) d) 12 SWG GI wire ( field eqpt. Like
6 1 Set
7 1 No.
8
1 Set
1 Set
2 Set
solenoid valves, LPBS etc.)e ) 14 SWG Cu wire ( lighting fixtures, 1 ph. Utility-sockets etc.) - 1 setLighting Panel Lighting panel with 32 A DP – ELMCB as incoming and 6 A SP-MCB – 6 nos. as outgoing feedersLP shall be with IP:42 protection, factory fabricated out of CRCA sheet, powder coated, with metal door, top and bottom removable gland plates, universal mounting, complete with copper busbars, earth bus, terminals for looping, cable-ties, shrouds to cover live terminals, front blanking plate with cutout for MCB operation and all accessories etc. Rate shall be inclusive of mounting structure and all required material for installation.
Lighting fixtures a) 1 x 40 W general purpose box type channel tube fittings with transparent acrylic cover, lamp, mounting hardware, JB for looping, and all accessories for ante room as per requirement
b) 1 x 18 W CFL fitting suitable for cold-storage room application, with acrylic cover including lamp, mounting hardware, JB for looping, and all accessories as per requirement.
c) Self – contained emergency light unit 20 W with sealed re-chargeable battery, battery-charger etc. complete in all respects for automatic switch on in case of supply failure.
8
9 1 Set
10 1 Set
11 1 Set
Note : Above rates shall be inclusive of all required material / mounting accessories eg. Brackets, clamps, M.S. black conduit-pipes for suspension, ball-socket joints, three point ceiling-roses, junction-boxes, mounting blocks etc.
MS powder coated switch-board with necessary piano switches for light fittings (one switch for max. 2 nos. fittings) and 1 no. single ph. 5 amp. 5 pin. Socket + switch As per requirement
32 Amp. TPN + E metal-clad industrial plug socket DB with 32 Amp. 4P-MCB for ref. Van
Emergency alarm system (230 VAC) for cold chambers with input signals from switches located inside cold chambers near each door. The system shall comprise of switches, JBs, 150 mm. Gong bell / hooter, visual indication to indicate the origin of alarm signal, test / accept / reset push- buttons, UPS ( backup for 1 hour ), necessary wiring and all required material, accessories.
TOTAL, Rs.TOTAL, IN WORDS:
Total Amount, Rs.
Total Amount, Rs.
C. PEB WORK
Description Unit Qty
1 M.Ton 34
2 M.Ton 13.548
3 M.Ton 3.41
4 Sqmtr 2135
5 Sqmtr 320
6 Rmtr 35
7 Rmtr 70
8 Rmtr 160
9 Lot 1Total
Sr. No.
Design, Fabrication and Erection of Primary Steel Structures - as per above mentioned specifications, dimensions and design standards. For shed size 62 X 30 X 4.5 mtr
Design, Fabrication and Erection of Secondary Steel Structures - (Purling & Grits) - as per above mentioned specifications, dimensions and design standards.
Design, Fabrication and Erection of Sag & Bracing Rods - (Including Primary and Secondary Framing, foundation bolts, fasteners etc) - as per above mentioned specifications, dimensions and design standards.Supply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa, Bare Galvalume, Roofing SheetsSupply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa,Colour Coated Galvalume,Sides Cladding sheets 2.5 Mtr Supply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa,Bare Galvalume,Profile RidgeSupply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa,Colour Coated Galvalume,Eave Gutter
Supply and Fixing of 0.47mm thick,AZ 150 and 550 Mpa,Colour Coated Galvalume,Downtake PipesSupply & Fixing of 0.47mm thk, AZ 150, and 550 MPa, Color Coated Galvalume - ROOFING ACCESSORIES (Flashings, Corner trims, etc)
C. PEB WORK
Rate Amount
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
PART I: PLANT & MACHINARYA) Insulated Panels & Doors
Sr. No. Item Unit Qty. Unit Rate (Rs.)
1.1 Wall & Ceilings Panels SqM 1300 100 mm PUF
1.2 Walls & ceiling Panels SqM 686 80 mm PUF
1.3 Walls & ceiling Panels 311 60 mm PUF SqM
1.4 Walls & ceiling Panels 714 40 mm PUF SqM
1.5 Floor Insulation RO80 mm PUF SqM
SUB TOTAL , RS.Sr. No. Item Unit Qty. Unit Rate (Rs.)
2.1 Manual sliding door of size 1800mm (W) x Nos. 102400 mm (H) x 80mm thk PUF2.2 Motorized OH door of size 2400mm (W) x Nos. 22800 mm (H) x 80mm thk PUF
SUB TOTAL, RS.
B) Refrigaretion Machine
Sr.No. Description Unit Quantity Unit Rate, Rs.
1 Nos. 62 Nos. 23 Nos. 84
Nos. 1
5
Nos. 1
6
set 1
7 Ducting & grills and other accessories for Air conditioning Area Lot 1
TOTAL
Unit & Air coil unit as per tender specification Capacity 8.5TR complete with ref. Piping cabling and electrical Panels Codensing Unit & Air coil unit as per tender specification Capacity in 9.5TR Piping cabling and electrical Panels Codensing Unit & Air coil unit as per tender specification of capacity 7.5 TR TR Piping cabling and electrical Panels SITC Ref. unit for Air conditioning of Packing & Dispatch dock comprising of Air Cooled Codensing Unit & Air coil unit as per tender specification of capacity 11.0 TR TR. Including Piping, GI Ducting with insualtion, SA/ RA Aluminum extruded Grills & Diffuser, wiring cabling and electrical Panels Temperature indicators & controllers
SITC Ref. unit for Air conditioning of Ante Room comprising of Air Cooled Codensing Unit & Air coil unit as per tender specification of capacity 5.5 TR TR. Including Piping, GI Ducting with insualtion, SA/ RA Aluminum extruded Grills & Diffuser, wiring cabling and electrical Panels Temperature indicators & controllers
SITC Evaporative cooling unit for Processing comprising of Centrifugal Fan fixed in housing, drive motor direct coupled or belt & pulley with water spray sytem as per tender specification of capacity 35000 CFM. Including Water Piping, GI Ducting with insualtion, SA Aluminum extruded Grills & Diffuser, wiring cabling and electrical Panels.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
C) OTHER PLANT & MACHINERYQTY. UNIT RATE
1 1 Set
2 1 Set
3 1 No.4 2 Nos.5 3 Nos.6 3 Nos.7 3 Set8 1 Nos.9 3 Nos.
10 1 Set11 1 Set12 25 Nos.13 3 Nos.
Sr. No. Item Unit Qty. Unit Rate (Rs.)
3.1 Ethylene gas emission system as per tech. specs Nos. 1 No.3.2 Ventilation system as per tech. Specs. set 4 Set3.3 Steam type Humidifiers capacity 3 to 4 KW set RO
SUB TOTAL, RS.
SR. NO. DESCRIPTION OF ITEMSSpray System:Chemical tank pipe cover, white color – 1000 Liter with pipe stand
Chemical tank to electric motor – 4 mts – 40 mm dia. connection pipe
Pressure gauge with SS material – 1 no.0.75 inches dia. valve of 316 SS – 10 Nos.1.5 inches dia. valve of SS 316 – 2 Nos.High Pressure water pump of 2 HP motor of Kirloskar make – 1 No.
MS C class pipe – 19 mm dia.-24 Mts.Spring type PVC pipe – 30 Mts with spray nozzles – 4 nos.
Recirculation System:Chemical Recycling piping with 65 mm dia. pipes of Supreme brand - 70 mInside pipeline with hole with fitting – 12 kg. Supreme brand white color – ISI marked with 35 mm thickness – 250 Mts
Stop valve – 35 mm – 10 nos.Outlet valve – 100 mm – 6 kg.& valves – 75 mm – 2 nosPipeline of 100 mm dia. – 8 kg. of Supreme brand – 40 RMts.
Pipeline from basement tank to recycling tank – 50 mm thk of Supreme brand – 50 MtInletlet pipe for clean water in the recycling chamber – 65 mm – Supreme brand of white color – 50 mt150 mm pipe with fitting – 6 MtsConnection pipe, loose – 65 mm thickness – 9 MtsValves – 65 mm – 5 Nos.Electric motor with starter along with cables – 2 hp Kirloskar – 2 nos.
M S cover for recycling tanks size – 1200 x 1200 mm – 3 Nos.
Plastic tank for sanitizer of 500 L capacityBanana TrolleyRoller conveyors for transferPlatform weight scaleSanitary spray nozzles systemHand portable vacuum machineS S TablesElectrical panel boards, for individual machinesLT cables & laying for item 11Banana Hand cutting sicklesReception conveyors
TOTAL , RS
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
PART I: PLANT & MACHINARY
Total Amount(Rs.)
Total Amount(Rs.)
Total Amount, Rs.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
AMOUNT
Total Amount (Rs.)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
Qty. Unit Rate
1 1 Set
2
150 RM
PART III – HT / LT POWER SUPPLY SYSTEM
1.0 – COLD STORE WITH PRECOOLING & RIPENING
Sr. No. Item description
Tapping of 11 KV power supply from MPEB OH line pole with HV cable-connection to line conductor, cable supports, GI pipe sleeve for cable protection, all required clamps, brackets, accessories, hardware, GI earth conductors, earthing, etc. complete as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements, including liasoning with MPEB and testing, approvals from all authorities concerned.All M.S. items to be duly painted with red-oxide zinc chromate primer and 2 coats of aluminium paint. Portions embedded in ground to be painted with 2 coats of bituminous paint.
11 KV, Aluminum conductor, XLPE insulated, PVC sheathed, screened, armoured cable as per IS, to be run on pole, laid in ready excavated trench / hume-pipe etc. including sealing of pipe-ends.
i) 3 C X 90 sq.mm.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
RO RM
3
2 No.RO No.
2 No.1 No.
4 1 Job
5 1 No.
6 1 No.
ii) 3 C X 120 sq.mm
11 KV Heat shrinking type termination for above cable including cable gland, cable lugs and all required accessories including earthing.
INDOOR: - i) 3 C X 90 sq.mm.ii) 3 C X 120 sq.mmOUTDOOR: - i) 3 C X 90 sq.mm.ii) 3 C X 120 sq.mm
MSEB approved outdoor compact type 11 KV metering cubicle having cable entry & termination arrangement for both incoming and outgoing connections. with 3 nos. CTs, 3 nos. PTs, arrangement for fixing electronic TOD meter, necessary terminal blocks, earthing terminals, mounting stand, foundation bolts, hardware, all accessories etc., earthing of CT, PT, body, cable armour etc. as per MPEB norms using black painted copper flat, complete as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements etc. including liasoning, coordination with MPEB and testing, approvals from all authorities concerned. Necessary cable-supports, pipe sleeve for cable, all required clamps, brackets, accessories, mounting structure, foundation bolts, hardware etc. shall also be provided.
Concrete foundation and grouting as required for metering cubicle with height above ground as per MPEB norms.
MPEB approved electronic TOD meter including liasoning, coordination etc. with MSEB and testing, approvals from authorities as required.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
7 1 Job
2-pole structure with height / clearances as per rules, using RSJ 100 X 116 poles ( min. length 9 m.) with 10 mm. thk. base-plate in M20 PCC 1.5 mtr. deep foundation and 300 mm. dia. muffing, interconnection from metering cubicle, 1 set of 3 nos. 11 KV class lightening arrestors, 1 set of 11 KV, 200 Amp. single break vertically mounted A.B. switch, 1 set of 11 KV D.O. fuses with operating rod, interconnection from DOF to transformer with alkathyne pipe insulated conductor, 11 KV insulators as required, ACSR conductor as required, M.S. channels, cross-bracings, supporting structure and all required clamps, connectors, hardware, accessories, double earthing of 3 nos. LA, 4 P structure, GOD, DOF using 40 X 6 mm GI flat, complete as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements including liasoning, testing, approvals from all authorities concerned.All M.S. items to be duly painted with red-oxide zinc chromate primer and 2 coats of aluminium paint. Portions embedded in ground to be painted with 2 coats of bituminous paint
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
8a 1 No.
8b RO No.
315 KVA, 3 ph. 50 Hz. 11 KV / 433 V transformer as per IS : 2026 and other applicable standards, vector group Dyn11, with off-circuit tap change switch having constant KVA taps in 6 steps of 2.5 %, low loss grain oriented silicon steel laminations, copper wound with minimum class A insulation, ONAN cooling with maximum 50 / 55 deg. temperature rise of oil / winding, outdoor type HV bushings, LV cable box suitable for 2 nos. 3.5 C X 90 sq. mm. AYFY cables, outdoor type LV neutral bushing, radiators, fittings and accessories as per IS including conservator, local winding and oil temperature indicators etc. complete with first fill of oil as per IS : 335 with 10 % extra for topping up at site, double earthing of neutral and transformer body using 40 X 6 mm GI conductor etc. as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements, including liasoning, testing, approvals from all authorities concerned. The job includes the dismantling of the existing transformer at Indapur site and replacing it with new one as specified in the tender along with all necessary accessories. The bidder shall add on the charges for this work. Please note that the existing transformer is the property of MSAMB and must be handed over back to MSAMB in working condition.Same as (8a) above, but of rating 500 KVA and with LV cable box suitable for 3.5C X 150 sq.mm cable. x 3 nos..
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
9 1 No.
10
17 No.
4 No.
400 Amp. 3 pole ACB ( 50 KA ) with earth fault relay, ammeter, voltmeter & indicating lamps in outdoor weather-proof sheet-steel powder coated enclosure having canopy, with terminal extensions, cable entry & exit boxes suitable for 2 nos. 3.5C X 90 sq.mm AYFY incomimg cables as well as 2 nos. 3.5 C x 90 sq. mm. Outgoing cables, mounting structure, accessories, hardware etc. including mounting frame, concrete grouting, double earthing using 40 X 6 mm GI flat, complete as per statutory requirements for transformer LV isolation.
Earthing stations including test-link as per IS : 3043 using:
a) 600 x 600 x 6mm. GI plate electrode with 50 x 6 mm. GI strip upto ground level.
b) 600 X 600 X 3 mm. copper plate electrode with 25 X 3 mm. copper strip upto ground level for transformer neutral.
The earth electrode shall be buried at a depth of 3 m. below GL. The earth connection, test link, pipe and funnel shall be housed in a masonry chamber approximately 350 mm. length x 350 mm. wide x 300 mm. deep. The masonry chamber shall he provided with a cast iron ( CI ) cover resting over a CI frame embedded in masonry. The chamber top shall be atleast 100 mm. above the ground level. The earthing stations shall be complete as per applicable standards, rules, norms, guidelines. Minimum spacing between adjacent earth electrodes shall be 3 mtr. Earth electrodes shall be interconnected using 50 X 6 mm GI conductor buried in ground at a depth of 150 mm.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
11 1 Set
12 1 No.
Switchyard fencing of 2.5 mtr. height comprising 8 SWG G.I. wire 40 mm. mesh chain link, vertical supports of 50 x 50 x 6 mm. MS angle at 2 mtr. interval, 40 x 40 x 5 mm. M.S. angle at top, middle and bottom so as to form a frame, 230 mm. thk. 400 mm. height brick wall duly plastered and painted, 2 nos. leaf type gates 3 mtr. wide, 2.5 mtr. height, made out of 40 mm. dia. G.I. pipe, 8 SWG GI chain link, M.S. angles etc. along-with locking arrangement and 2 nos. RSJ gate supports, earthing of fence vertical supports, gates etc. Fencing and gates shall be painted with red-oxide primer and 2 coats of aluminium paint. Supply, spreading and leveling of 40 mm. size, 150 mm. thk. stone gravel in fenced area is included. The clearances, fencing, gates, gravel etc. shall be as per applicable standards, rules, norms, guidelines of Electricity Board.
175 KVA, 3ph. & neutral, 50 Hz. 415V, 0.8 pf, heavy duty water-cooled Diesel - Generator of Kirloskar Cummins make set with cable box suitable for 2 no. 3.5C X 90 sq. mm. AYFY cable, neutral earthing terminal, heavy duty batteries, engine mounted alternator for battery charging, manual control panel, local indicators, fuel tank, channel base frame, anti-vibration pads, complete with all required equipment, accessories, fittings, controls, safety devices, exhaust piping, fuel piping, silencer, double earthing of neutral and body etc. as per applicable standards, rules, norms, guidelines of local authorities, statutory requirements, including liasoning, testing, approvals from all authorities concerned.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
13 1 Set
Main Power Distribution Board ( PDB): -Panel shall be totally enclosed cubicle type free standing, floor-mounting, compartmentalized and modular in construction, expandable on both sides, fabricated out of 14 gauge CRCA sheet steel duly pretreated and painted with 2 coats of red-oxide zinc-chromate primer and painted with synthetic enamel paint or powder coated.Panel shall have separate MSEB / DG supply change-over & incomer section with door interlock and isolated horizontal / vertical bus-bar chambers. Bakelite / acrylic shrouds with danger lables shall be provided as required to cover live parts and busbars for safety purpose. Separate cable-alleys shall be provided. Component layout in individual modules shall be spacious with adequate clearances for ease of operation and maintenance. Capacitor modules when provided shall have adequate cooling arrangement such as louvres at rear and sides. Cable entry shall be top or bottom as per site conditions. Aluminium anodized labels shall be provided for components and feeders. 40 x 6 mm GI earth busbar shall be provided along panel length with terminals brought out at both ends. Necessary foundation frame / pedestal / mounting structure, sheet metal blanking covers, foundation bolts and all required material / accessories etc. shall be included.Vendor shall submit detailed SLD, G.A. & dimensional drawings, BOM and wiring diagram for Owner's approval. Panel shall be manufactured and tested in an approved manner as per IS:8623 and other applicable standards.MCC shall consist of following feeders:
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
A . Change-over section
(i) 400 Amp four pole switch-fuse load-break change-over switch with suitable cable-entry and termination arrangement for 2 nos. 3.5 C X 90 sq. mm. AYFY cables each for MSEB and DG supplies.(Total 2 nos. cables) - 1 no.
(ii) 3 Nos. supply on LED type indication lamps with 3 Nos. HRC fuses for MSEB and DG supply on indication. – 2 sets(iii) 315 / 5 Amp., 10 VA Y-ph. CT on MSEB supply side for APFC panel - 1 no.B. Incomer(i) 400 Amp ACB ( 50 KA ) with OL, SC, EF protections, operating handle and door interlock, etc.- 1 no.(ii) 0 to 500 V voltmeter, voltmeter selector switch, 3 Nos. HRC fuses etc. – 1 set
(iii) 0 to 200 Amp. ammeter, ammeter selector switch, 3 Nos. 630 / 5 Amp., 10 VA CTs, shorting links etc. – 1 set(iv) Copper neutral link - 1 no.(v) Busbars – 1 set
50 X 6 mm. main copper busbars with red, yellow, blue, black colour heat shrinkable PVC sleeves and mounted on epoxy / SMC insulator supports of tested quality as per IS. Other vertical copper busbars shall be rated for total compartment rating with current density of 1.5 Amp. per sq. mm. Minimum size 50 X 6 mm.Minimum clearance on all sides of each busbar shall be 25 mm.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
14 1 Set
C. Outgoing Feeders
Cables / wires used for switchgear power connections shall be PVC insulated multi-strand copper conductor as per IS with current rating atleast 40% more than feeder FLC. Minimum wire size shall be 2.5 sq. mm. ( to be used upto 16 Amp. MCB feeder). For feeder rating above 63 Amp, busbars shall be used.
(i) 200 Amp TP MCCB with protections, operating handle and door interlock . neutral link etc. for machine room, and refrigeration systems – 1 nos.
(ii) 63 Amp MCB with protections, operating handle and door interlock . neutral link etc. for Air conditioning system – 1 no.(iii) 100 Amp. MCB with protections, operating handle and door lock, neutral link etc for Grading & Packing Hall.(iv) 100 Amp MCB with protections, operating handle & door lock, neutral link etc for complete lighting.(v) 63 Amp. MCB as spareLT Capacitor APFC PanelAutomatic power factor correction compartmentalized, modular, cubicle type totally enclosed panel generally as per main PDB specification as under:A) Incomer :(i)150 Amp MCCB with OL,SC protections, operating handle, door interlock etc. – 1 no.
(ii) Supply on LED type indication lamps with HRC fuses – 3 nos.(iii) Auto / Manual switch – 1 no.(iv) APFC relay (Syntron / Sycon make) – 1 no.(v) 0-60 sec. Timer for manual operation – 1 set(vi) 0 to 500 V voltmeter, voltmeter selector switch, 3 Nos. HRC fuses etc.- 1 set
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
15
100 M50 M50 M
1000 M1500 M
(vii) 0 to 160 Amp. ammeter, ammeter selector switch, 3 Nos. 200 / 5 Amp., 10 VA CTs, shorting links etc – 1 set.(viii) TPN Copper busbars 40 X 6 mm – 1 set(ix) Copper neutral link – 1 no.( x) Other components, fans etc. for completion - LotB) Outgoing Feeders:
i) 200 Amp auto switch with contactor for Tranformer – 1 no.C) Capacitor modules
(i)25.0 KVAR capacitor module with capacitor, 63 Amp. SFU ( fuse rating as per capacitor mfr. recommendation), 63 Amp. contactor, start, stop push-buttons, indication lamp, control fuse switchgear, other components etc. – 6 nos.(ii) 25 KVAR capacitor module as above but without capacitor bank - 2 nos.
1.1 KV grade PVC insulated, PVC sheathed, muilti-strand Al or Cu conductor as specified, armoured cables as per IS : 1554, to be laid in excavated trenches, hume pipes, readymade cable trenches, cable trays, on wall/structure with necessary dressing,clamping, cleating, tagging etc.
a) 3.5C X 90 sq.mm. - Aluminiumb) 4 C X 6 sq.mm. – Copperc) 4C X 4 sq.mm. – Copperd) 4C X 2.5 sq.mm. – Coppere) 4 C x 1.5 sq. mm. – Copper
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
16
8 No.10 No.10 No.75 No.RO No.
17
100 M150 M75 M
LT cable end termination using heavy duty crimping type lugs, bi-metal treatment in case of connection between dissimilar metals,, brass nickel plated double compression cable glands, PVC tape, PVC sleeves etc.
a) 3.5C X 90 sq.mm. - Aluminiumb) 4 C X 6 sq.mm. – Copperc ) 4C X 4 sq.mm. – Copperd) 4C X 2.5 sq.mm. - Coppere) 3 C x 1.5 sq. mm. – Copper
14 gauge GI trays with galvanizing as per IS : 2629, IS : 2633, IS : 4759 etc. to be mounted in trenches, wall, beam, structure etc. including accessories, hardware, anchor fasteners, brackets, supports etc. as per site requirement. Tray sizes as under :
a) 300 mm – perforated type with GI coverb) 150 mm – perforated type with GI coverc) 100 mm – perforated type with GI cover
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
18
80 M40 MRO M400 M
Earthing as per IS : 3043 using conductors of following sizes inclusive of brazing, welding, jointing, clamping, hardware, bituminous paint at joints, connection to equipment and all required material, to be laid in outdoor trench at a depth of minimum 600mm, indoor in conduit, trays or on floor / wall / ceiling / roof / structure etc. with clamping at 500 mm. intervals. All electrical equipment, metal casings, frames, electrical panels, lighting panels, crane rails, tracks, metal pipes, conduits, cable trays etc. shall be earthed at two points. Steel columns, metallic staircases, ladders, hand rails etc. shall be earthed using single earth conductor bonded to each component with ends connected to two different points of the earth grid. Metallic sheaths, screens, armour of cables shall be earthed at both ends of cable. Lighting fixtures, fans, switch-sockets, switch-GAIC, junction boxes etc. shall be earthed by means of separate earth continuity conductor to be run along lighting cable, conduit, casing-caping etc. Neutral connections and metallic conduits / pipes shall not be used for equipment earthing.(Note : Sub-station earthing not included under this item as it is covered under resp. items)
a) 50 x 6 GI stripb) 25 x 3 Copperc) 8 SWG GI wired ) 12 SWG GI wire
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
19
1 No.
40 M
Lightening protection system for building as per IS : 2309 inclusive of brazing, welding, jointing, clamping, hardware, bituminous paint at joints, complete as per applicable standards, rules, norms, guidelines etc., comprising of :
a) Vertical air terminals including rigid and strong mounting arrangement to sustain all weather conditions, wind load etc. and all required material.
b) Horizontal / Vertical roof top conductor 25 x 3 mm. copper fixed on insulated supports at 750 mm interval along building peripheryAll metallic items within a radius of two metres shall be bonded to the lightening protection conductor. Lightning down conductors shall be directly connected to earth electrodes with minimum bends. All joints shall be of brazed type. Down conductors shall not be connected to other earthing conductors above ground level.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
20 1 Set
21
100 No.
40 No.
Lighting panels ( LP )(i) 50 Amp. 4 P-ELMCB as incomer and 10 Amp. SPMCB - 10 nos. as outgoing feeders for COLD STORE WITH PRECOOLING & RIPENINGs– 3nos.(ii) 40 Amp. 4P-ELMCB as incomer and 10 Amp. SPMCB - 12 nos. as outgoing feeders for Office, Store, & Machine room – 2 no.iii) 50 Amp. 4 P ELMCB as incomer and 10 Amp. SPMCB for Grading Hall & Despatch dock – 1 nos.iv) 40 Amp. 4P ELMCB as incomer and 10 Amp. SPMCB for Ante rooms 1 & 2 – 2 nos.LPs shall be with IP:42 protection, factory fabricated out of CRCA sheet, powder coated, with metal door, top and bottom removable gland plates, universal mounting, complete with copper busbars, earth bus, terminals for looping, cable-ties, shrouds to cover live terminals, front blanking plate with cutout for MCB operation and all accessories etc. Rate shall be inclusive of mounting structure and all required material for installation.Lighting Fixtures / fans a) 1 x 40 W general purpose box type channel tube fittings with transparent acrylic cover, lamp, mounting hardware, JB for looping, and all accessories for packing hall
b) 2 x 40 W general purpose box type channel tube fittings with transparent acrylic cover, lamp, mounting hardware, JB for looping, and all accessories for packing hall
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
4 No.
25 No.
4 No.
22
10 No.
10 No.
c) Self - contained emergency light unit 20 W with sealed re-chargeable battery, battery-charger etc. complete in all respects for automatic switch on in case of supply failure.d) Ceiling fan 1200 mm. size with regulator and all accessories including anchor fastener with fan-hook in ceiling.e) Exhaust fan 450 mm. size including mounting frame, hardware and all accessories etc.
Note : Above rates shall be inclusive of all required material / accessories eg GI pipe brackets, clamps, M.S. conduit-pipes for suspension, ball- socket joints, three point ceiling- roses, junction-boxes, PVC / wooden mounting blocks etc.
Street light fixtures (i) 150 W HPSV outdoor type weather proof cast aluminium enclosure light fixture with lamp, ballast,capacitor and all required accessories, hardware etc. for pole mounting
(ii) 9 mtr. swaged type medium gauge welded pole as per IS with base plate, earthing stud, junction-box with MCB, terminals etc., 1 mtr. length lamp bracket, pole cap, wiring from jb to lamp using 2.5 sq.mm. PVC insulated flexible copper wire etc. complete for 150 W HPSV lamp fixing.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
23 125 No.
24 10 No.
Point wiring from Grading hall LP to switch-board to light / fan-points in PVC conduits on wall / ceiling inclusive of mains, sub-mains, sunmica top wooden switch-board with 5 Amp. piano switch for each light fixture, 650 V grade PVC insulated flexible copper wires as specified below etc. 14 SWG copper earth wire to be used from sw. board to fitting. Rate shall be inclusive of conduit accessories, clamps, saddles, junction boxes, spacers and all required material.
Note : 1 no. 5amp. 5 pin plug-socket & piano-switch shall be provided on each switch-board and shall be considered as half point and paid at half the unit rate.
Wire Sizes(i) LP to sw. board - 3 nos. 2.5sq.mm.(ii)Sw. board to light –2 nos. 1.5 sq.mm.Neutral for individual circuit shall be run separately.Colour code:- Ph-Red, Neutral - Black, Earth- Green
1 ph. 5 Amp. 2 pin / 3 pin plug socket with piano-switch on sunmica top wooden board including wiring in PVC conduit as per Item ( 24a ) above in Grading hall & Anter ooms & Reception areas ).
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
25
2 No.
265 No.
27
RO MT
28
RO MRO MRO MRO M
29 5 No.
30 RO M
31 RO No.
63 Amp. TPN + E metal-clad industrial plug socket DB with 63 Amp. 4P-MCB in sheet metal box for welding / miscellaneous sockets
1 ph, 16 A metal-clad 3 pin plug socket DB with 16 A DPMCB in sheet metal box for utility power sockets in machine rooms
Structural steel for cable supports, base frames, mounting frames, brackets, various other supports, miscellaneous requirements etc. The maximum sizes of sections shall be as under.a) ISMC 100b) ISA 75 X 75 X 6c) 25 X 6 mm M.S. flatd) 6 mm. thk. chequered plateHume pipes of following ID to be laid below ground including jointing and sealing of ends to prevent water ingress
a) 300 mm.b) 250 mm.c) 200 mm.d) 150mm.Providing man hole with masonry chamber and CI cover for laying or withdrawal of cables in hume pipes.
Providing and laying in 600 mm. (W) X 1000 mm. (D) trench with sand layer 150 mm. thick and single brick layer on cable top including refilling the trench, levelling and providing metal cable markers at 3 mtr. intervals.Taking 6 inch bore in rocky soil upto minimum 3 mtr. depth or as required for GI pipe earth electrode.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
32
1 Set
5 No.
2 Set
1 Set
2 No.
2 No.
2 No.
2 No.
Fire Fighting and Safety equipment
a) Fire fighting system as per statutory requirement of fire fighting & safety department with provision of latest equipments.
b) Portable 5 kg capacity dry type fire extinguisher suitable for electrical fire as per IS and as recommended by TAC.
c) Floor mounted bucket stand with 4 nos 13 litre buckets hung on hooks. The stand shall be 1.5 m L x 1.0 m H made out of MS angle frame duly painted with red oxide primer and 2 coats of red colour finish paint.d) Antiskid chequered type 415 V grade black rubber mat 1000 mm wide as per IS 5424 for panels, switches etc.
e) First aid box with contents as per standard requirements.f) Shock treatment chart in English, Hindi and Gujarati with wooden frame and glass cover.
g) Metallic permanently inscribed danger. GAIC 11 KV and 415 V.h)Insulated hand gloves pairs 11 KV and 415V .
TOTAL, RS.TOTAL IN WORDS:
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
2.0
Qty. Unit
1 1 Set
RELATED ELECTRICALS FOR REFRIGERATION SYSTEM: -
Sr. No. Item description UnitRate, Rs.
Main Power & Motor Control Panel (PMCP) Panel shall be totally enclosed cubicle type free standing, floor-mounting, compartmentalized and modular in construction, expandable on both sides, fabricated out of 14 gauge CRCA sheet steel duly pretreated and painted with 2 coats of red-oxide zinc-chromate primer and painted with synthetic enamel paint /powder coated.
Panel shall have separate incomer section with door interlock and isolated horizontal / vertical bus-bar chambers. Bakelite / acrylic shrouds with danger ouver shall be provided as required to cover live parts and busbars for safety purpose. Separate cable-alleys shall be provided. Component layout in
individual modules shall be spacious with adequate clearances for ease of operation and maintenance. Capacitor modules when provided shall have adequate cooling arrangement such as ouvers at rear and sides. Cable entry shall be top or bottom as per site conditions. Aluminium anodized labels shall be provided for components and feeders. 25 x 6 mm GI earth busbar shall be provided along panel length with terminals brought out at both ends. Necessary foundation frame / pedestal / mounting structure, sheet metal blanking covers, foundation bolts and all required material / accessories etc. shall be included.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
1 1 Set
Blank modules - 3 Nos. blank modules without any components suitable for 3.7 K.W. motor starters shall be provided.
Vendor shall submit detailed SLD, G.A. & dimensional drawings, BOM and wiring diagram for Owner’s approval.
Panel shall be manufactured and tested in an approved manner as per IS:8623 and other applicable standards.Panel shall consist of following feeders:(i) Incomer 125 Amp TPN with fuses, operating handle and door interlock, etc. – 1 no.(ii) 0 to 500 V voltmeter, voltmeter selector switch, 3 Nos. HRC fuses etc. – 1 set(iii) 0 to 200 Amp. Ammeter, ammeter selector switch, 3 Nos. 315 / 5 Amp., 10 VA CTs, shorting links etc. - 1 set
(iv) Supply on LED type indication lamp with HRC fuse etc. - 1 set
(v) Copper neutral link - 1 set (vi) Busbars – 25 X 6 mm. Main copper busbars with red, yellow, blue, black colour heat shrinkable PVC sleeves and mounted on epoxy / SMC insulator supports of tested quality as per IS. Other vertical copper busbars shall be rated for total compartment rating with
current density of 1.5 Amp. Per sq. mm. Minimum size 25 X 3 mm.
Minimum clearance on all sides of each busbar shall be 25 mm.
(Incoming cable size 95 sq. mm x 3.5 C AYFY Outgoing Feeders - 1 seta) Motor rating upto 7.5 KW
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
1 1 Set
- DOL starter comprising of TP-MCB, SPPR (only for compressor and condensor motors), 1 no. contactor, 1 no. OLR, control MCB, start / stop push-buttons, selector-switches, motor ON indication lamp, terminals etc.
b) Motor rating above 7.5 KW - Star delta starter comprising of TP-MCB, SPPR (only for compressor and condensor motors), 3 nos. contactors, 1 no. OLR, electronic star delta timer, control MCB, start / stop push-buttons, selector-switches, motor ON indication lamp, terminals etc.
c) TP-MCB shall be suitable for motor duty and rating shall be co-ordinated with OLR rating as per manufacturer’s recommendations.
j) Contactor shall be AC3 duty with current rating atleast 10% more than motor FLC. Minimum contactor rating 12 amp.- OLR shall have SPP feature with maximum setting at-least 10% more than motor FLC.- Cables / wires used for switchgear power connections shall be PVC insulated multi-strand copper conductor as per IS with current rating atleast 40% more than feeder FLC. Minimum wire size shall be 2.5 sq. mm. ( to be used upto 3.7 KW).
Feeders as reqd. for following systems 1) 7.0 TR x 2 nos. ref. System for pre-cooling - 2 sets 2) 4.5 TR x 1 nos. ref. System for each COLD STORE WITH PRECOOLING & RIPENING I - 1 set 2a) 5.0 TR x 4 nos. ref. system for each ripening chamber - 4 sets
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
1 1 Set
2 1 Set
3 1 Set
3) Air –curtains - 4 Nos.4) 4P- MCB feeder for ref. Van socket – 1 no. 5 ) 32 Amp. – 1 no.6) 4P- MCB feeder for lighting - 32 Amp – 1 no.7) 4P – MCB feeder spare - 32 Amp.- 1 no.8) Any other motor, 4P-MCB and DP-MCB feeders as per system reqmt.9) MCBs, relays, timers, switches, push-buttons, indication lamps, alarms, controls, instrumentation, necessary circuitry etc. as per system requirement for control and interlocking of compressors, fans, pumps, solenoid valves, level switches, pressure switches, heaters etc. – 1 set as required
TPN isolators (MCB type) suitable for motor duty in outdoor type metal enclosure for motors located outside machine room. – 1 set as required
1.1 KV grade PVC insulated, PVC sheathed, Al or Cu stranded conductor as specified, armoured cables as per IS : 1554, to be laid in readymade cable trenches, cable trays, on wall / structure with necessary dressing, clamping, cleating, tagging etc. including necessary material. – 1 set as required
a) 2C X 1.5 sq.mm – Copper ( lighting fixtures, alarm system and misc. 1 ph. Small power reqmt. Eg. Solenoids)b) 2C X 2.5 sq.mm – Copper c) 3C X 2.5 sq.mm. – Copper ( 1 run for motors upto 3.7 KW, lighting panel, switch-board and 1 ph. 15 A sockets in refrigerated areas )
d) 3C X 4 sq.mm. – Copper ( 1 run for motors upto 7.5 KW – DOL and 2 runs for motors upto 12.5 KW - SD)e) 3C X 6 sq.mm. – Copper ( 2 runs for motors upto 15 KW - SD)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
3 1 Set
4 1 Set
f ) 3C X 16 sq.mm – Aluminium ( 2 runs for motors upto 22 KW - SD)
1) 4C X 2.5 sq.mm. – Copper 2) 4C X 4 sq.mm. – Copper
I ) 4C X 6 sq.mm. – Copper ( for ref . van socket )j ) 4C X 16 sq.mm – Aluminium
3) 4C X 25 sq.mm – Aluminium l ) Any other power cables as per scope and system reqmt.
m) Copper control cables of size 1.5 sq. mm. As per system reqmt.
n) Instrumentation cables as per system reqmt.LT cable end termination using heavy duty tinned copper lugs, brass nickel plated double compression cable glands, PVC tape, PVC sleeves etc.
a) 2C X 1.5 sq.mm – Copper b) 2C X 2.5 sq.mm – Copper c) 3C X 2.5 sq.mm. – Copper d) 3C X 4 sq.mm. – Copper e) 3C X 6 sq.mm. – Copper f ) 3C X 16 sq.mm – Aluminium
4) 4C X 2.5 sq.mm. – Copper 5) 4C X 4 sq.mm. – Copper
I ) 4C X 6 sq.mm. – Copper j ) 4C X 16 sq.mm – Aluminium
6) 4C X 25 sq.mm – Aluminium l ) Any other power cables as per scope and system reqmt.
m) Copper control cables of size 1.5 sq. mm. As per system reqmt.
n) Instrumentation cables as per system reqmt. – 1 set
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
5 1 Set
6 1 Set
14 gauge GS perforated trays of required sizes with accessories, to be mounted in trenches, or on wall, beam, structure including steel supports, hardware, anchor fasteners etc. as per site requirement.. – 1 set
Earthing as per IS : 3043 using conductors of following sizes inclusive of brazing, welding, jointing, clamping, hardware, bituminous paint at joints, connection to equipment and all required material, to be laid along conduit, trays or on floor / wall / ceiling / roof / structure etc. with clamping at 500 mm. Intervals. All electrical equipment, metal casings, frames, electrical panels, crane rails, tracks, metal pipes, conduits, cable trays etc. shall be independently earthed at two points. Metallic sheaths, screens, armour of cables shall be earthed at both ends of cable. Neutral connections and metallic conduits / pipes shall not be used for equipment earthing.
a) 32 x 6 mm GI strip (MCC panel )b) 25 x 3 mm GI strip ( Sub-grid along cable-trays, motors above 3.7 KW upto 30 KW, MCB-DBs, lighting panels etc. )c) 8 SWG GI wire ( motors upto 3.7 KW, power isolators, JBs, lighting
poles etc.) d) 12 SWG GI wire ( field eqpt. Like solenoid valves, LPBS etc.)e ) 14 SWG Cu wire ( lighting fixtures, 1 ph. Utility-sockets etc.) - 1 set
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
7 1 No.
8
1 Set
1 Set
2 Set
Lighting Panel Lighting panel with 32 A DP – ELMCB as incoming and 6 A SP-MCB – 6 nos. as outgoing feedersLP shall be with IP:42 protection, factory fabricated out of CRCA sheet, powder coated, with metal door, top and bottom removable gland plates, universal mounting, complete with copper busbars, earth bus, terminals for looping, cable-ties, shrouds to cover live terminals, front blanking plate with cutout for MCB operation and all accessories etc. Rate shall be inclusive of mounting structure and all required material for installation.
Lighting fixtures a) 1 x 40 W general purpose box type channel tube fittings with transparent acrylic cover, lamp, mounting hardware, JB for looping, and all accessories for ante room as per requirement
b) 1 x 18 W CFL fitting suitable for cold-storage room application, with acrylic cover including lamp, mounting hardware, JB for looping, and all accessories as per requirement.
c) Self – contained emergency light unit 20 W with sealed re-chargeable battery, battery-charger etc. complete in all respects for automatic switch on in case of supply failure.
Note : Above rates shall be inclusive of all required material / mounting accessories eg. Brackets, clamps, M.S. black conduit-pipes for suspension, ball-socket joints, three point ceiling-roses, junction-boxes, mounting blocks etc.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
9 1 Set
10 1 Set
11 1 Set
MS powder coated switch-board with necessary piano switches for light fittings (one switch for max. 2 nos. fittings) and 1 no. single ph. 5 amp. 5 pin. Socket + switch As per requirement
32 Amp. TPN + E metal-clad industrial plug socket DB with 32 Amp. 4P-MCB for ref. Van
Emergency alarm system (230 VAC) for cold chambers with input signals from switches located inside cold chambers near each door. The system shall comprise of switches, JBs, 150 mm. Gong bell / hooter, visual indication to indicate the origin of alarm signal, test / accept / reset push- buttons, UPS ( backup for 1 hour ), necessary wiring and all required material, accessories.
TOTAL, Rs.TOTAL, IN WORDS:
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
Total Amount, Rs.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
Total Amount, Rs.
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)
BANANA PACKHOUSE RIPENING FACILITY FOR EXPORT
Madhya Pradesh State Agricultural Marketing Board (MP Mandi Board)