Date post: | 08-Apr-2016 |
Category: |
Documents |
Upload: | lauri-virkkunen |
View: | 215 times |
Download: | 0 times |
Project XX BenchTitle BenchDesigned by Lauri VirkkunenEmail [email protected] Drawn 4.2.2013
Paper Size A4Sheet No. 2/7File Scale
All copyright, design and other intellectual property rights in the contents here of are the sole and exclusive property of Lauri Virkkunen. The provision of this document to you does not afford you any ownership rights or license to use or reproduce same, all of which remains the property of Lauri Virkkunen. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part,without the prior written consent of Lauri Virkkunen is strictly prohibited.
XX bench is made of pine wood. The construction of the product consists of six solid wood pieces. Four of those form two pairs of legs and the bench seat consists of two planks.
The parts are connected with wood joints, confirmed with wood glue and screws. The screws are not visible at first glance of the product. They are drilled from the inner sides of the parts.Bench has been treated with Teknos Aqua Primer and wood oil.The designer got inspired by natural wood roots and traditional cross structured table legs.
XX Bench in a nutshell
Project XX BenchTitle BenchDesigned by Lauri VirkkunenEmail [email protected] Drawn 4.2.2013
Paper Size A4Sheet No. 2/7File Scale
All copyright, design and other intellectual property rights in the contents here of are the sole and exclusive property of Lauri Virkkunen. The provision of this document to you does not afford you any ownership rights or license to use or reproduce same, all of which remains the property of Lauri Virkkunen. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part,without the prior written consent of Lauri Virkkunen is strictly prohibited.
Planks (mm)x2
110.00
1020
.00
30.00
70.00
40.00 20.11
Leg Parts (mm)2+2
Project XX BenchTitle BenchDesigned by Lauri VirkkunenEmail [email protected] Drawn 4.2.2013
Paper Size A4Sheet No. 2/7File Scale
All copyright, design and other intellectual property rights in the contents here of are the sole and exclusive property of Lauri Virkkunen. The provision of this document to you does not afford you any ownership rights or license to use or reproduce same, all of which remains the property of Lauri Virkkunen. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part,without the prior written consent of Lauri Virkkunen is strictly prohibited.
20.0053
.39
104.
50
67.6°
112.4°
53.39
104.50
67.6°
112.4°
Legs (mm)1+1
Project XX BenchTitle BenchDesigned by Lauri VirkkunenEmail [email protected] Drawn 4.2.2013
Paper Size A4Sheet No. 2/7File Scale
All copyright, design and other intellectual property rights in the contents here of are the sole and exclusive property of Lauri Virkkunen. The provision of this document to you does not afford you any ownership rights or license to use or reproduce same, all of which remains the property of Lauri Virkkunen. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part,without the prior written consent of Lauri Virkkunen is strictly prohibited.
250.00
30.00
40.00
280.
00
30.00110.00
31.0
0
20.0
070.00
40.0
0110.00
Screws (mm)8+8
Project XX BenchTitle BenchDesigned by Lauri VirkkunenEmail [email protected] Drawn 4.2.2013
Paper Size A4Sheet No. 2/7File Scale
All copyright, design and other intellectual property rights in the contents here of are the sole and exclusive property of Lauri Virkkunen. The provision of this document to you does not afford you any ownership rights or license to use or reproduce same, all of which remains the property of Lauri Virkkunen. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part,without the prior written consent of Lauri Virkkunen is strictly prohibited.
“A”
“B”
8.00
8.00
25.00
8 X screw “A” (mm)
8.00
8.00
8 X screw “B” (mm)
30.00
Render
Project XX BenchTitle BenchDesigned by Lauri VirkkunenEmail [email protected] Drawn 4.2.2013
Paper Size A4Sheet No. 2/7File Scale
All copyright, design and other intellectual property rights in the contents here of are the sole and exclusive property of Lauri Virkkunen. The provision of this document to you does not afford you any ownership rights or license to use or reproduce same, all of which remains the property of Lauri Virkkunen. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part,without the prior written consent of Lauri Virkkunen is strictly prohibited.