ART FILM - TOP
ART FILM - TOP
129285JOB NUMBER:
16940KSID:
A
LAYER 1 - TOP SIDEXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
U1
U2
C15
C16
R17
JMP15 R18
C14
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
R15
R16
BOARD NAME:
ART FILM - BOTTOM
ART FILM - BOTTOM
129285JOB NUMBER:
16940KSID:
A
LAYER 4 - BOTTOM SIDEXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
ART FILM - L2_GND
ART FILM - L2_GND
129285JOB NUMBER:
16940KSID:
A
LAYER 2 - GND PLANEXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
ART FILM - L3_PWR
ART FILM - L3_PWR
129285JOB NUMBER:
16940KSID:
A
LAYER 3 - PWR PLANEXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
ART FILM - SMASK_TOP
ART FILM - SMASK_TOP
129285JOB NUMBER:
16940KSID:
A
SOLDERMASK TOPXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
ART FILM - SMASK_BOT
ART FILM - SMASK_BOT
129285JOB NUMBER:
16940KSID:
A
SOLDERMASK BOTTOMXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
ART FILM - SILK_TOP
ART FILM - SILK_TOP
129285JOB NUMBER:
16940KSID:
VCC ON
D1
BA
TB2
A
SILKSCREEN TOPXXXXXXXXXXXXXXXXXXX
EARTH
BA
JMP7
C9
JMP9VCC
BOARD REV:
LAYER DESCRIPTION:
TB1
GNDVCC
C2
C11
EARTH
EARTH
R9
R8
EARTH
GNDEARTH
VCM_B
C4
EARTH
C13
EARTHBA
EARTHJMP6
EARTH
VCM_A
VCM_B
C8
VCC
R5 C7
JMP10
GNDEARTH
VCM_A
JMP8
U1*
*
R17
C16
C15
* R18
R16R15
U2
C14
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
DIRECTION CONTROL RS485TIDA-01090 AUTOMATIC
C6
R2
R3
JMP15
R4
BOARD NAME:
RGNDEARTH
/REGNDEARTH
DEGNDEARTH
DGNDEARTH
R OUTD3
JMP11
JMP12
JMP13
JMP14
D2D IN
RVCC
JMP1
GNDEARTH
VCC/REGND
EARTHJMP2
DEVCC
GND
JMP3EARTH
VCCD
GNDEARTH
JMP4
ART FILM - SILK_BOT
ART FILM - SILK_BOT
129285JOB NUMBER:
16940KSID:
R1
EARTH
BA
A
SILKSCREEN BOTTOMXXXXXXXXXXXXXXXXXXX
BA
VCC
BOARD REV:
LAYER DESCRIPTION:
GNDVCC
C1
C10
R6 EARTH
EARTHR7EARTH
GNDEARTH
VCM_B
C5
EARTH
C12
EARTHBAEARTH
EARTH
VCM_A
VCM_B
VCC
GNDEARTH
VCM_A
C3
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
S/N:
BOARD NAME:R
GNDEARTH
/REGND
EARTH
DEGND
EARTH
DGND
EARTH
R11R10
R14
VCCR
EARTHGND
VCC
GND/RE
EARTH
VCC
GNDDE
EARTH
VCCDGNDEARTH
ART FILM - PMASK_TOP
ART FILM - PMASK_TOP
129285JOB NUMBER:
16940KSID:
A
PASTEMASK TOPXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
ART FILM - PMASK_BOT
ART FILM - PMASK_BOT
129285JOB NUMBER:
16940KSID:
A
PASTEMASK BOTTOMXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
ART FILM - ASSY_TOP
ART FILM - ASSY_TOP
D
C
B
A
REV.
A
1
1SHEET 1 OF 2
ENGINEER
H TEJAS
129285JOB NO.
16940
NONE
KSID NO.
2
TEXAS INSTRUMENTS
BOARD NAME : xxxxxxxxxxxxxxx
ASSEMBLY DRAWING (TOP SIDE)
D2
CUSTOMER
SIZE
SCALE
DATE04-12-16
xx-xx-xxxxxLYNN WITTER
APPROVALS
DO NOT SCALE DRAWINGRELEASED:DRAWN:
3
3
4
4
5
5
6
6
7
7
U1
U2
C15
C16
R17
JMP15 R18
C14
R15
R16
8
8
D
C
B
A
ART FILM - ASSY_BOT
ART FILM - ASSY_BOT
D
C
B
A
REV.
A
1
1SHEET 2 OF 2
ENGINEER
H TEJAS
129285JOB NO.
16940
NONE
KSID NO.
2
TEXAS INSTRUMENTS
BOARD NAME : xxxxxxxxxxxxxxx
ASSEMBLY DRAWING (BOTTOM SIDE)
D2
CUSTOMER
SIZE
SCALE
DATE04-12-16
xx-xx-xxxxxLYNN WITTER
APPROVALS
DO NOT SCALE DRAWINGRELEASED:DRAWN:
3
3
4
4
5
5
6
6
7
7
8
8
D
C
B
A
ART FILM - FABRICATION
ART FILM - FABRICATION
D
C
B
A
REV.
A
ENEPIG
1
BREAK-AWAY
1
2.0 OZ.
2.0 OZ.
2.0 OZ.
SHEET 1 OF 1
HASL
ELECTRICAL TEST
UL 94V-0
ENGINEER
H TEJAS
129285
OTHER
ALL x MIL VIAS
ALL x MIL VIAS
X
X
PER SUPPLIED ARTWORK
OTHER:
OTHER:
1.0 OZ.
1.0 OZ.
1.0 OZ.
SILKSCREEN
X
X
OTHER
RoHS
X
JOB NO.
IPC-6012C TYPE 3 CLASS 2
OTHER +/-
BLUE
IDENTIFIER:
IDENTIFIER:
X
YES - SEE TABLE 1
YES
X
NO
ETCH
X
BOW & TWIST:
1/2 OZ.
1/2 OZ.
1/2 OZ.
BOTTOM
BOTTOM
X
ORGANIC (OSP)
OTHER
WHERE INDICATED (SEE DRAWING)
X
X
TENTED
YES
16940
NONE
WHITE
GREEN
X
SOFT GOLD
KSID NO.
ROGERS 4350B
0.093" +/-10%
X
X
YES
TDR REPORTS/COUPONS
2DESIGN INFORMATION
415.0 MILX.X MIL20/10 MIL
NONE
NO
X
TEXAS INSTRUMENTS
BOARD NAME : xxxxxxxxxxxxxxx
FABRICATION DRAWING
D2
X
1/4 OZ.
1/4 OZ.
1/4 OZ.
TOP
TOP
OPEN
NO
CUSTOMER
SIZE
SCALE
X
X
X
DATE
IN AN OPEN AREA
04-12-16
xx-xx-xx
NICKEL/GOLD (ENIG)
IMMERSION TIN
HARD GOLD
X
X
MICRO-SECTION
CERTIFICATES OF COMPLIANCE
FR-4 HIGH Tg
0.062" +/-10%
IPC-6012C TYPE 3 CLASS 2
OTHER +/-
SILKSCREEN COLOR:
SOLDERMASK COLOR:
THROUGH-HOLE VIA TREATMENT:
VIA FILL USING NON-CONDUCTIVE EPOXY:
FOR WIRE BONDING:
X
X
VENDOR DATE CODE,UL,LOGO:
xxx
NUMBER OF LAYERS:MIN. TRACK WIDTH:MIN. CLEARANCE :MIN. VIA PAD/DRILL:
X
X
X
OUTER:
INNER SIGNAL:
INNER PLANE:
OTHER:
SILKSCREEN:
SOLDERMASK: (PER IPC-6011,6012)
THIEVING ALLOWED:
BOARD SURFACE TREATMENT:
ADDITIONAL REQUIREMENTS:
VENDOR MARKING:
LYNN WITTER
BOARD SIZE (REFER ALSO ARRAY/PANEL PROFILING INFORMATION)
MIN. ANNULAR RING 2 MIL EXTERNAL PER IPC-6012C CLASS 2REGISTRATION TOLERANCES: METAL +/- X MIL,HOLES +/- X MIL
IMPEDANCE CONTROL:
MIXED DIELECTRIC:
LAMINATE MATERIAL:
THICKNESS:
TOLERANCE:
COPPER THICKNESS (FINISHED):
BOARD FINISH:
APPROVALS
DO NOT SCALE DRAWINGRELEASED:DRAWN:
3
3
REFERENCELAYER
LAYER 2
LAYER 3
SINGLE ENDEDTRACE WIDTH
0.017"
0.017"
4
SINGLE ENDEDIMPEDANCE (OHMS)
50 +/- 10%
50 +/- 10%
4
DIFF TRACESPACING
DIFF TRACEWIDTH
5
5
DIFFIRENTIAL PAIRIMPEDANCE (OHMS)
LAYER NAME
TOP
L2_GND
L3_PWR
BOTTOM
2:1:FAB SHOP MUST FOLLOW THE SOLDER MASK REVIEW LAYERS.
SPECIAL FAB NOTES:
PLACE DRILL CHART HERE:
TABLE 1:
LAYER NO.
LAYER 1
LAYER 2
LAYER 3
LAYER 4
6
6
129285JOB NUMBER:
3.000
16940
7
KSID:
7
A
FABRICATION DRAWINGXXXXXXXXXXXXXXXXXXX
BOARD REV:
LAYER DESCRIPTION:
* AIR 0 MIL * SOLDERMASK-0.8MIL 0.8 MIL L1: COPPER_1/2OZ_PLATED 1.4 MIL
* FILL_0.250 9.84 MIL
L2: COPPER_1.0OZ 1.4 MIL
* CORE_1.00 35.12 MIL
L3: COPPER_1.0OZ 1.4 MIL
* FILL_0.250 9.84 MIL
L4: COPPER_1/2OZ_PLATED 1.4 MIL * SOLDERMASK-0.8MIL 0.8 MIL * AIR 0 MIL
4.000
XXXXXXXX
ALL ARTWORK LAYERS VIEWED FROM TOP
BOARD NAME:
1-4
8
DESIGN CROSS SECTION CHART___________________________TOTAL THICKNESS 62 MIL
8
CAD ORIGIN
D
C
B
A
IMPORTANT NOTICE FOR TI REFERENCE DESIGNS
Texas Instruments Incorporated (‘TI”) reference designs are solely intended to assist designers (“Designer(s)”) who are developing systemsthat incorporate TI products. TI has not conducted any testing other than that specifically described in the published documentation for aparticular reference design.TI’s provision of reference designs and any other technical, applications or design advice, quality characterization, reliability data or otherinformation or services does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI products, andno additional obligations or liabilities arise from TI providing such reference designs or other items.TI reserves the right to make corrections, enhancements, improvements and other changes to its reference designs and other items.Designer understands and agrees that Designer remains responsible for using its independent analysis, evaluation and judgment indesigning Designer’s systems and products, and has full and exclusive responsibility to assure the safety of its products and compliance ofits products (and of all TI products used in or for such Designer’s products) with all applicable regulations, laws and other applicablerequirements. Designer represents that, with respect to its applications, it has all the necessary expertise to create and implementsafeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen thelikelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any systemsthat include TI products, Designer will thoroughly test such systems and the functionality of such TI products as used in such systems.Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a specialcontract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would causeserious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Suchequipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices andequivalent classifications outside the U.S.Designers are authorized to use, copy and modify any individual TI reference design only in connection with the development of endproducts that include the TI product(s) identified in that reference design. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BYESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY ORINTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right,copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products orservices are used. Information published by TI regarding third-party products or services does not constitute a license to use such productsor services, or a warranty or endorsement thereof. Use of the reference design or other items described above may require a license from athird party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectualproperty of TI.TI REFERENCE DESIGNS AND OTHER ITEMS DESCRIBED ABOVE ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMSALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING THE REFERENCE DESIGNS OR USE OFTHE REFERENCE DESIGNS, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILUREWARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNERS AGAINST ANY CLAIM, INCLUDING BUT NOTLIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS ASDESCRIBED IN A TI REFERENCE DESIGN OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT,SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITHOR ARISING OUT OF THE REFERENCE DESIGNS OR USE OF THE REFERENCE DESIGNS, AND REGARDLESS OF WHETHER TIHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.TI’s standard terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integratedcircuit products. Additional terms may apply to the use or sale of other types of TI products and services.Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-compliance with the terms and provisions of this Notice.IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2016, Texas Instruments Incorporated
