Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
Summary
Dock for a Moto G4 Plus. Uses a "CoolKo" 90-degree magnetic microusbcharging cable.
On my phone, the microusb connector slides out easily, if pulling thephone straight out of the dock, so there's a little extra space so that thephone can be tipped out of the dock instead of sliding up
Gadgets > Portable devices
motog4plus dock chargingdock
(Possibly) clean up the cable hole a little with files to allow the cable endto slide in. Feed wire into channel.
To keep it from moving around, you could add rubber feed or bumpers, ora add another channel for a strand of ninjaflex, or just some museumpaste.
Billiam
Moto G4 Plusmagnetic chargingdock
VIEW IN BROWSER
updated 14. 8. 2019 | published 14. 8. 2019
3D M
ODEL
ONLY
1.3 MBupdated 14. 8. 2019
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
dock.stl