Summary
The Ramones beermat round and square - made in Fusion 360 for myPruse i3 Mk3 with MMU2.
These were printed 95mm x 95mm x 2mm, 100% infill.
Use Black .STL for either Round or Square and select appropriate White.STL for your print.
For more beermats, see my group:
https://www.thingiverse.com/groups/beermats/things
Art & Design > 2D Plates & Logos
ramones punk prusai3mk3mmu2 multicolour multicolor
mmu2 coaster beermat
Category: Signs & Logos Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: No
Ramones Beermat -round and Squarefor MMU2
VIEW IN BROWSER
updated 4. 11. 2019 | published 4. 11. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
2.1 MBupdated 3. 11. 2019
3.0 MBupdated 3. 11. 2019
3.1 MBupdated 3. 11. 2019
Supports: No
Resolution: .2
Infill: 100%
Filament: Generic PLA Black / White
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
black_ramones.stl
round_white_ramones.stl
square_white_ramones.stl
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition