Summary
An educational sliding block toy for small children. Big pieces with differentcolors and shapes with animal silhouettes hidden beneath.
I made it as a present for a one year old and she loves it.
Warning: To small kids this might look like a hammer. Make sure your toesdoes not look like nails.
Demo:
"https://www.youtube.com/embed/s7d6SKIvX1g"
Toys & Games > Puzzles & Brain-teasers
toddler shape hammer fun color children animal
toy slide puzzle kid educational block
Additional parts needed
8 M4x12mm screws 8 M4 nuts (3mm thick) 8 M4 washers
General
To achieve optimal quality and avoid sharp edges I recommend using asmall amount of elephant foot compensation for the first layer of all parts.
H Hairald
Sliding block toyfor toddlers
VIEW IN BROWSER
updated 4. 4. 2020 | published 21. 3. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
870.6 KBupdated 21. 3. 2020
95.1 KBupdated 21. 3. 2020
183.8 KBupdated 21. 3. 2020
105.1 KBupdated 21. 3. 2020
88.7 KBupdated 21. 3. 2020
Bottom
Start with white filament and add a color change at 0.6mm to changeto black filament for good contrast for the animal silhouettes.Pause the print at 6.6mm (beginning of the layer) to add the M4nuts (I used a color change to pause at the correct height).
Tiles
Add a color change at 5.2mm to print the shape in a different color.
Assembly
"https://www.youtube.com/embed/9hokxjw0iVg"
•
•
bottom.stl
middle.stl
top.stl
circletile.stl
hextile.stl
89.0 KBupdated 21. 3. 2020
75.4 KBupdated 21. 3. 2020
87.7 KBupdated 21. 3. 2020
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
crosstile.stl
squaretile.stl
tirangletile.stl