Summary
This is a compact printable case for the SOTAbeams PP 4-Way kit, which isa small and economical distribution block for DC power up to 25A usingAnderson PowerPoles.
These kits make a great addition to a go-box to power your radio and acouple peripherals (or another radio), or for any other case where youmight need to split a PowerPole connection.
Assembly requires the following parts in addition to the SOTABeams PP 4-Way:1) 6x M3 nylon nuts2) 6x M3 8mm M-F nylon spacers3) 6x M3 20mm nylon screws
It is possible to use a different screw/spacer lengths to mount thePowerPoles lower in the box.
Hobby & Makers > Electronics
sotabeams powerpoles powerpole dcpower 12vdc
Unassociated tags: amateur radio, anderson powerpole, ham radio, pp 4-way
grajohnt
SOTAbeams PP 4-Way Case
VIEW IN BROWSER
updated 20. 10. 2019 | published 20. 10. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
93.4 KBupdated 20. 10. 2019
72.0 KBupdated 20. 10. 2019
Licence: Creative Commons - AttributionCategory: Electronics Print Settings
Printer Brand: FlashForge
Printer: Creator Pro
Rafts: No
Supports: No
Infill: 40%
Notes:
Printed in PETG - other materials should be possible.
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
pp4_body.stl
pp4_top.stl
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition