Summary
I made a vase that not only looks nice it feels nice (for the visuallyimpaired). Print one out and rub your fingers all over it!
Art & Design > Other Art & Designs
vases vase twistedvase
I recommend a 0.15mm layer height or smaller.
Riskable
Textured TwistVase
VIEW IN BROWSER
updated 25. 2. 2020 | published 25. 2. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
3.4 MBupdated 25. 2. 2020
3.4 MBupdated 25. 2. 2020
3.4 MBupdated 25. 2. 2020
3.4 MBupdated 25. 2. 2020
3.4 MBupdated 25. 2. 2020
3.4 MBupdated 25. 2. 2020
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
low-poly_rose_vase_textured_24159.stl
low-poly_rose_vase_textured_24159.stl
low-poly_rose_vase_textured_24159.stl
low-poly_rose_vase_textured_24159.stl
low-poly_rose_vase_textured_24159.stl
low-poly_rose_vase_textured.stl
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition