Date post: | 16-Apr-2017 |
Category: |
Engineering |
Upload: | hosein-yavari |
View: | 315 times |
Download: | 4 times |
SENA Partners
2
High end enterprise level hybrid IPPBX to facilitate your communication with its rich function, powerful performance, wide interoperability, great customizability, and easy administration.
All you need in
one device !!!
MyPBX Series
3
SOHO32 SIP users, 15 concurrent calls, small and comprehensive
Standard100 SIP users, 25 concurrent calls, meet the highest standards
100 SIP users, 25 concurrent calls, professional business solutionU100
U200
U300
U5XX
200 SIP users, 50 concurrent calls, all you need in one system
300 SIP users, 50 concurrent calls, more features with least cost
500 SIP users, 80 concurrent calls, powerful solution for enterprises
4
TEXT HERE
Items
MyPBXSOHO
MyPBXStandard
MyPBXU100
MyPBX U200
MyPBXU300
MyPBXU500/U510/U520
Users 32 100 100 200 300 500
Concurrent Calls
15 25 25 50 50 80
VoIP Trunks 32 64 64 64 64 128
IVR 32 32 32 32 32 64
Conference Rooms
16 16 16 16 16 32
Ring Group 16 16 16 16 16 32
Ring Group Members
20 20 25 50 50 60
Paging group 16 16 16 16 16 32
Paging Group
Members20 20 25 50 50 60
6
Port status indicator
RJ11 ports
USB port for external storage
Network Interface
LED lights for Corresponding port
MyPBX SOHO
Up to 4 Analog ports( FXO/FXS)
7
MyPBX Standard
Port status indicator
RJ11 ports
LED lights for Corresponding port
USB port for external storage
Network Interface
Up to 16 Analog ports( FXO/FXS)
Up to 8 GSM/CDMA/WCDMA channels
8
MyPBX U100
Up to 16 Analog ports( FXO/FXS)
Up to 8 GSM/CDMA/WCDMA channels
LED lights for Corresponding port
Network Interface
USB port for external storage
Port status indicator
RJ11 ports
Console port
Audio in/ out
9
MyPBX U200
Up to 16 Analog ports( FXO/FXS)
Up to 8 GSM/CDMA/WCDMA channels
LED lights for Corresponding port
Network Interface
USB port for external storage
Port status indicator
RJ11 ports
Console port
Audio in/ out
10
MyPBX U300
2 FXS Ports
1 E1 Port
E1 port
Console port
Audio in/ out
Network Interface
FXS Ports
11
MyPBX U500
Up to 16 Analog ports( FXO/FXS)
Up to 8 GSM/CDMA/WCDMA channels
LED lights for Corresponding port
Network Interface
USB port for external storage
Port status indicator
RJ11 ports
Console port
12
MyPBX U510
Up to 16 Analog ports( FXO/FXS)
Up to 8 GSM/CDMA/WCDMA channels
LED lights for Corresponding port
Network Interface
USB port for external storage
Port status indicator
RJ11 ports
Console port
E1 port
1 E1 Port
13
MyPBX U520
Up to 16 Analog ports( FXO/FXS)
Up to 8 GSM/CDMA/WCDMA channels
LED lights for Corresponding port
Network Interface
USB port for external storage
Port status indicator
RJ11 ports
Console port
E1 ports
2 E1 Ports
14
• Call Transfer• Call Forwarding• Call Pickup• Call Waiting• Call Back• Call Detail Records
• Queues• Ring Group• IVR• Call Holding • Music on Hold• Caller ID
• Three-way Calling• Voicemail• Speed Dial• Do Not Disturb (DND)• Call Blacklist• BLF
Basic Features
Call ParkingIP Phones Auto ProvisionConferencingDISATime Condition RoutingMWI
Voicemail to EmailT.38 FaxFax to EmailDial by namePIN UsersDistinctive Caller ID
One Touch RecordInbound/Outbound Routes
DNISCustom Prompts
Interoperable with Lync
DIDDOD
IntercomDistinctive Ringtone
SpyMobility Extension
MyPBX Advanced Features
VoIP
Service
Provider
LAN
Primary
Server
Secondary
Server
Heartbeat
detection
VoIP
Service
Provider
LAN
Primary
Server
Secondary
Server×
HOT STANDBY
• Automatic Detection
Secondary Server detect the system automatically.
Keep track on the system status.
• Auto SwitchIn case of the system broke down, the secondary
server will automatically take over as the SIP server.
• Fast and flexible installationSimple connection, realize all configuration through
web browser.
• Email and SMS alert
Once system break down happen, a email or SMS
will be sent to the adimistrator.
Auto Switch
Basic Configuration
Basic ConfigurationSystem and network settings
Configure and Register extensions
Configure Trunks
Outbound call control
Inbound call control
Other Basic Settings
Security and Backup
Warming Up
Part1. MyPBX ConnectionLet’s see how to connect Switch, IP phones, router and MyPBX in the same network
Warming Up (cont.)
Part2. Login MyPBX’s web interface
1. Power on your Laptop/PC and log in
2. Set the NIC (Ethernet Port) of your Laptop/PC to match MyPBX’s subnet. Example: Set the NICIP Address to 192.168.5.XXX and set the Subnet Mask to 255.255.255.0. Turn on the MyPBX andwait until the system initializes properly. This may take a few minutes. Once the RUN LED blinksgreen, it means the system is working normally.
3. Open your browser and go to http://192.168.5.150
Warming Up (cont.)
Log into web GUI and change a new IP addressFactory default IP address: 192.168.5.150Default username: adminPassword: password
Logic Steps
System and network settings
Step 1 Set a new IP address for MyPBX
Step 2 Set a new password for the web GUI
Step 3 Set the Date and Time for MyPBX
Step 4 Download the system prompts for MyPBX
System and network setting (Cont.)
• Set a new IP address for MyPBX
System and network setting (Cont.)
• Set a new password for the Web GUI
System and network setting (Cont.)
• Date and Time for MyPBX
System and network setting (Cont.)
• Download the system prompts for MyPBX
Extensions
Step 5 Define the extension preferences
Step 6 Set up analog and SIP extensions
Step 7 Register the extension in IP phone side
Extensions (Cont.)
• Define the extension preferences
Extensions (Cont.)
• Set up analog and SIP extensions
Extensions (Cont.)
• Register the extension in IP phone side manually
Extensions (Cont.)
• Register the extension via phone provisioning
Get configurations files from MyPBX
Trunks
Step 8 Configure the trunks well in MyPBX
Multiply trunks are supported in MyPBX, you need configure that depends on the trunk you got.
Trunks (Cont.)
• Configure the trunks in MyPBX
Trunks (Cont.)
• Trunks-E1/T1 trunk
Trunks (Cont.)
• Trunks-PSTN trunk
Trunks (Cont.)
• Trunks- GSM trunk
Trunks (Cont.)
• Trunks- VoIP Trunk
Trunks (Cont.)
• Trunks- VoIP trunk
Trunks (Cont.)
• Trunks- Service Provider trunk
Outbound call control
Step 9 Create outbound route which allows you to dial out through trunk we configured.
Outbound call control (Cont.)
• Logic
Input numbers—The numbers dialed through phones
Match dial Pattern — Special characters have special meanings
Transform digits—Copy from input/Remove/Insert digits
Send to destinations—Send to different trunks/branch offices
phone number
Match the Dial pattern
Check the next route
Transform digits
Send to destination
trunk
Yes
No
Outbound call control (Cont.)
• Outbound route page
Outbound call control (Cont.)
• Dial pattern
Dial pattern will match from the beginning to the end
We can choose different trunks for different callsFor 110, we can choose PSTNFor Local 7 digits calls, we might choose PRI or GSMFor Long Distance calls, we can choose VoIP trunk
X : Any Digit from 0-9Z : Any Digit from 1-9N : Any Digit from 2-9[12345-9] : Any digits in the brackets (in this example, 1,2,3,4,5,6,7,8,9)The ‘.’ character will match any remaining digits. For example, 9011. will match any phone number that starts with 9011, excluding 9011 itself.
Inbound call control
Step 10. Define the business hours for company
Step 11. Set the inbound route with the destination pre-configured
Inbound call control (Cont.)
• Business hours
Inbound call control (Cont.)
• inbound call control
Inbound call control (Cont.)
Input
Is it in the blacklist
Give Dial Tone
Go to configured destination
Yes
Yes
No
Go to holiday destination
Yes
Go to non-office destination
No
No
MatchResource
trunk?
Yes
CheckNext rules
NoNo
Yes
• Logic
Reject the call
Match DID/CID
Mobile Extension
Match Business
hours
Match Holiday
Yes
Inbound call control (Cont.)
Play IVR prompt and wait for key
Key Press?
Reach Repeat count?
Wait for Key time out
Valid key?
Time out destination
Key event destination
Invalid destination
Yes
Yes
Yes
No
No
No
• IVR
Inbound call control (Cont.)
• Queue
Inbound call control (Cont.)
• Conference Room
Other basic settings
Step 12. Check the feature code for daily use
Step 13. Set Voicemail settings to send voicemail to mailbox
Other basic settings (Cont.)
• Check the feature code
Other basic settings (Cont.)
• Voicemail settings
Security & Backup
Step 14. Check basic Security settings
Step 15. Do backup when all finished
Security & Backup (Cont.)
• Check basic Security settings
Security & Backup (Cont.)
• Check basic Security settings
Security & Backup (Cont.)
• Check basic Security settings
Security & Backup (Cont.)
• Check basic Security settings
Hacker
Firewall
Sip attack packets
MyPBX can detect if an abnormal amount of SIP packets is sent to a SIP station, within a shortperiod of time. MyPBX will then add the IP address of the “guilty” host, to be blacklistedautomatically. Once an IP has been added to the blacklist, the host will no longer be able to sendany packets to MyPBX, unless the administrator deletes the IP from the blacklist manually.
Security & Backup (Cont.)
• Do backup when all finished
Backup the configurations when all tests work fine, you can download it to local pc for storage as well.