Date post: | 15-Jul-2015 |
Category: |
Education |
Upload: | aaron-maurer |
View: | 126 times |
Download: | 0 times |
Spring 2015
Welcome
This webinar is being held to test your hardware. If you can see this screen and hear my voice, you are good to go!
www.sketchup.com
Lesson 1Fill in the information boxes.
Select your computer
Select the type download and check the boxes.
Select student
Basics
SELECTION TOOL
DRAWING LINES
DRAWING SIMPLE FIGURES
PULLING/PUSHING
PANNING AND ORBITING
ROTATING AND MOVING
ZOOMING
Lesson 1
Selection tool
• Click once to select a line or face• Click twice to select a 2D object • Click three times to select whole object
Lesson 1
Rotate
• With selector tool, triple click to select whole object
• With rotate tool selected, double click face center
ROTATING AROUND CENTER
Lesson 1
Lines and shapesShape by size
Lesson 1
Click once to start shape, move mouse to “get shape started”, then simply start typing. Once you hit enter shape should finish on its own.Tip: Don’t click on the dimensions box. Just start typing.
Lines and shapes
Sides
Lesson 1
Circles and polygons the number of sides can be changed. Then you enter the radius.
Lines and shapes
Sides
Lesson 1
Circles and polygons the number of sides can be changed. Then you enter the radius.
Try it!
Arcs
• Click for start point, click for end point, move mouse to bend
• Measured: Click to start, enter length of line, enter ‘radius’ for curve
Lesson 1
Text
• Comments ‘swivel’ with camera, 3D text objects act like any other element and do not ‘swivel with camera
Lesson 1