P r e c i s i o n p a n e l i n s t r u m e n t a t i o n w i t h a n a l o g , d i g it a l a n d p u l s e i n p u t s f o r i n d i c a t i o n , d a t a i n t e r f a c e o r c o n t r o l • Selector Guide PLUG-IN OPTIONS ¥ Universal Power Supplies ¥ Analog Outputs 0-20 mADC and 0-10 VDC ¥ Digital Interface: RS-232, RS-485, Modbus ¥ Dual Setpoint Controller UNIVERSAL DIGITAL METER ¥ DC Volts and Amps ¥ AC RMS Volts and Amps ¥ Thermocouples and RTDs ¥ Process Signals ¥ Strain Gauge and Load Cell UNIVERSAL DIGITAL COUNTER ¥ Frequency and Period ¥ Rate and Total ¥ Integration and Square Root ¥ Quadrature and more UM330
Transcript
Precision panel instrumentation
with
analog,digitalandpulseinputs
fori
ndic
atio
n,da
tain
terfa
ceor control •
Selector Guide
PLUG-IN OPTIONS¥ Universal Power Supplies¥ Analog Outputs 0-20
mADC and 0-10 VDC¥ Digital Interface: RS-232,
RS-485, Modbus¥ Dual Setpoint Controller
UNIVERSAL DIGITAL METER¥ DC Volts and Amps¥ AC RMS Volts and Amps¥ Thermocouples and RTDs¥ Process Signals¥ Strain Gauge and Load Cell
UNIVERSAL DIGITAL COUNTER¥ Frequency and Period¥ Rate and Total¥ Integration and Square Root¥ Quadrature and more
Accuracy (25¡C) ANSI TC type KFull scale or reading 0.04%FS 0.1%FS 0.04°C 0.1°C 0.04%FS 0.03%FS 0.01%FS Ī2ppm 0.015% Ī2ppmĪ number of counts 1 1 - - 1 1 1Span TEMPCO 0.003% of reading/°C- except load cell(0.0015% rdg./°C) & FR(Ī1ppm/°C typical)Zero TEMPCO 0.1 counts/°C 0.001FS/°C
Full sensor reading
Display: 7-segment LED, 14.2mm, .56” high digitsNumber of digits 5 digits 6 digitsRange -99999 to +99999 -999999 to +999999LED indicators 2 status indicators 3 status indicatorsColor Red or Green available with all models
Conversion: Patented A/D conversion method (US patent no. 5,262,780) 1 / period time:A-to-D rate 60/sec.@ 60Hz operation; 50/sec.@50 Hz operation Gate time + 30ms + 2 periods ofOutput update rate (UDM) 56/sec.@ 60Hz operation; 47/sec.@50 Hz operation the input signal (max): gate timeDisplay update rate (UDM) 3.5/sec.@ 60Hz operation; 3/sec.@50Hz operation selectable 0 to 199.99 seconds
Noise rejection: Common Mode voltage from DC to 60 Hz safety rated to 250 VAC; 4.2 kVp per high voltage testCMR (DC to 60 Hz) 130 dB -NMR (50/60 Hz line) 90 dB with minimum filtering -
Case: NEMA 4 (IP65) 1/8 DIN case made of high impact 94V-0 UL rated plastic (NEMA 4x rated when panel mounted)
Certifications: UL 61010C (ULMark), EN61010-1 (CE Mark)
Operating Power: Frequency 49 to 440 HZ and DC, consumption 5.3 Watts maximumStandard Universal power supply 85 to 264 VAC, 90 to 370 VDCOption Universal power supply 8 to 28 VAC, 9 to 37 VDC
Excitation: Selectable with shorting jumpers on power supply printed circuit board (normal setting 10 VDC)Outputs 5 VDC, ±5%, 100 mA max., 10 VDC, ±5%, 120 mA max., 24 VDC, ±5%, 50 mA max.Isolation (power ground) 50Vdc to meter ground
Dual Controller option: Power is provided by meter, update rate is 56 / second at 60 Hz, 47 / second at 50 HzSetup Setpoint values may be entered from front panel pushbutton or via RS-232 or RS-485Output operation Either may be set to operate above or below setpoint, latching or non-latching, or output disabledFiltering Comparison to the setpoints may be from filtered or unfiltered input signalTime delay Selectable time delay of output status change from 1 to 128 readingsLockouts Pushbutton control of display and change of setpoints, or display of setpoints, or disableAlarm status indicators Either of two red LED’s may be set to indicate when output is on or off, or they may be disabled
Relay output: 8 A at 240 VAC, 8 A at 24 VDC contact rating; safety certification: VDE, UL, CSAIsolation Coil to contacts :Safety rated to 250VAC, 4.2 kV peak; Between open contacts : Withstand 1 kVrmsResponse to input signal Pick-up: 26 milliseconds typical; Release: 22 milliseconds typical
Optotransistor output: Voltage rating: 30VDC; Current rating: 100 mA minimum at 1.2 VDC maximumIsolation Safety rated to 250 VAC, 4.2 kV peak per high voltage testResponse to input signal 17 milliseconds typical
Analog output option: Power : provided by meter, Isolation: Withstand 3750 Vrms, 8mm creepageAccuracy Use basic meter accuracy ±0.05% of analog output full scaleResponse time 17 milliseconds for unfiltered input, same as basic meter for filtered output
RS-232 / RS-485/ Power : provided by meter; Isolation: safety rated to 250 VAC, 4.2 kVp per high voltage testModbus RS-485 option: 300, 600, 1200, 2400, 9600, 19200
Baud rates Full duplex (RS-485) / meets RS-232 and RS-485 standardsType / Signal levels
0.04% FS for 5A
0.03% FS for 660V
0.01% FSFS all others
0.04% FS for 5A
0.03% FS for 660V
0.01% FSFS all others
0.04% FS for 5A
0.03% FS for 660V
0.01% FSFS all others
800Plus
DC
Vo
lt &
Am
p
AC
Vo
lt &
Am
p
RT
D T
emp
erat
ure
The
rmo
coup
le
Pro
cess
Mo
nito
r
Str
ain
Gau
ge
Load
Cel
l
FR C
oun
ter/
Tim
er
VF
Co
unte
r/T
imer
QD
Qua
dut
ure
Inp
ut
Specifi
catio
ns
Model Type: 800Plus
Universal Digital Meter 800Plus
Universal Counter
UNIVERSAL DIGITAL METERS & COUNTERS
DC VOLTS and AMPS Selector GuideModel Format:
Insert model code from the selection below:
➊ Basic DPM, display & power supply: List Price Y810 Green LED display, 85~264 VAC, 90~370 VDC ..................................................................$239.00 Y811 Green LED display, 8~28 VAC, 9~37 VDC ..........................................................................$269.00 Y820 Red LED display, 85~264 VAC, 90~370 VDC ....................................................................$239.00 Y821 Red LED display, 8~28 VAC, 9~37 VDC ............................................................................$269.00
➎ Other Options: /BL Keyless faceplate. Specify meter range, scale, and legend information
if desired with order information. . . . . . . . . . . . . . . . . . . . . . . . .$25.00
Ordering Model Y821-00-0-DCV3 has red LED display with 8~28 VAC, 9~37 VDC powerExample: and 20.000 VDC input range.
The 800Plus Universal Digital Meter is a versatile, cost effective solution to a wide variety of monitoring and control applica-tions. The input can be changed by the user to any of the DC voltage and current values listed above by re-locatingshorting jumpers on the plug-in signal conditioner card. No calibration equipment is required when changing ranges sincethey are digitally precalibrated at the factory. Rescaling is accomplished via front panel pushbuttons. Optional alarms andoutputs are also front panel programmable. Refer to product bulletin 800SP-A for complete specifications and descrip-tion of all features.
➊ ➋ ➌ ➍ ➎
800Plus
3
RMS VOLTS and AMPS Selector GuideModel Format:
Insert model code from the selection below:
➊ Basic DPM, display & power supply: List Price Y810 Green LED display, 85~264 VAC, 90~370 VDC $239.00 Y811 Green LED display, 8~28 VAC, 9~37 VDC ..........................................................................$269.00 Y820 Red LED display, 85~264 VAC, 90~370 VDC ....................................................................$239.00 Y821 Red LED display, 8~28 VAC, 9~37 VDC ............................................................................$269.00
➎ Other Options: /BL Keyless faceplate. Specify meter range, scale, and legend information
if desired with order information. . . . . . . . . . . . . . . . . . . . . . . . .$25.00
Ordering Model Y821-10-1-RMV5 has red LED display with 8~28 VAC, 9~37 VDC power,Example: dual 8A relay outputs, RS-232 digital interface and 660.0 VAC input range.
The 800Plus Universal Digital Meter is a versatile, cost effective solution to a wide variety of monitoring and control applications. Theinput can be changed by the user to any of the RMS voltage or current values listed above by re-locating shorting jumpers on the plug-in signal conditioner card. No calibration equipment is required when changing ranges since they are digitally precalibrated at the facto-ry. Rescaling is accomplished via front panel pushbuttons. Optional alarms and outputs are also front panel programmable. Refer toproduct bulletin 800SP-A for complete specifications and description of all features.
➍ Temperature Type: P385C Pt100 Ohm RTD DIN -202 to 850¡C ............................................................N/C P385F Pt100 Ohm RTD DIN -331 to 1562¡F ..........................................................N/C P392C Pt100 Ohm RTD ANSI -202 to 850¡C ..........................................................N/CP392F Pt100 Ohm RTD ANSI -331 to 1562¡F ........................................................N/C
JC J Thermocouple -210 to 760¡C....................................................................N/CJF J Thermocouple -347 to 1400¡F ..................................................................N/CKC K Thermocouple -244 to 1372¡C ................................................................N/C KF K Thermocouple -408 to 2501¡F..................................................................N/CTC T Thermocouple -257 to 400¡C....................................................................N/CTF T Thermocouple -430 to 752¡F ....................................................................N/C EC E Thermocouple -240 to 1000¡C ................................................................N/C EF E Thermocouple -400 to 1830¡F ..................................................................N/C SC S Thermocouple -46 to 1768¡C ..................................................................N/C SF S Thermocouple -51 to 3213¡F....................................................................N/C RC R Thermocouple -45 to 1768¡C ..................................................................N/C RF R Thermocouple -49 to 3214¡F....................................................................N/C
➎ Other Options: /BL /blKeyless faceplate. Specify meter range, scale, and legend information
if desired with order information. . . . . . . . . . . . . . . . . . . . . . .$25.00
Ordering Model Y821-10-1-RMV5 has red LED display with 8~28 VAC, 9~37 VDC power,Example: dual 8A relay outputs, RS-232 digital interface and 660.0 VAC input range.The 800Plus Universal Digital Meter inputs can be changed by the user to any of the RTD or thermocouple values listed above by re-locating shorting jumpers on the plug-in signal conditioner card. No calibration equipment is required. Refer to product bulletin 800SP-Afor complete specifications and description of all features.
800Plus
5
➊ ➋ ➌ ➍ ➎
PROCESS INPUTS, LOAD CELL, Selector GuideSTRAIN GAUGEModel Format:
Insert model code from the selection below:
➊ Basic DPM, display & power supply: List PriceY810 Green LED display, 85~264 VAC, 90~370 VDC ..................................................................$239.00Y811 Green LED display, 8~28 VAC, 9~37 VDC ..........................................................................$269.00Y820 Red LED display, 85~264 VAC, 90~370 VDC ....................................................................$239.00Y821 Red LED display, 8~28 VAC, 9~37 VDC ............................................................................$269.00
➎ Other Options: /BL Keyless faceplate. Specify meter range, scale, and legend information
if desired with order information. . . . . . . . . . . . . . . . . . . . . . . . .$25.00
Ordering Model Y811-10-1-P1 has green LED display with 8~28 VAC, 9~37 VDC power,Example: dual 8A relay outputs, RS-232 digital interface and customer specified input
range of 4-20 mADC = 0 to 1600.0 on display
*Specify input/display requirements (include excitation for load cells). If the requirmentcan be provided the/Jxx number will be assigned prior to entry of the order.
The 800Plus Universal Digital Meter is a versatile, cost effective solution to a wide variety of monitoring and con-trol applications. The input can be changed by the user to other values within each signal input category aboveby re-locating shorting jumpers on the plug-in signal conditioner card. No calibration equipment is requiredwhen changing ranges since they are digitally precalibrated at the factory. Rescaling is accomplished via frontpanel pushbuttons. Optional alarms and outputs are also front panel programmable. Refer to product bulletin800SP-A for complete specifications and description of all features.
➊ Counter, display & power supply: List Price Y850 Basic counter, green LED display, 85~264 VAC, 90~370 VDC............................................$277.00 Y851 Basic counter, green LED display, 8~28 VAC,9~37 VDC ....................................................$309.00 Y860 Basic counter, red LED display, 85~264 VAC,90~370 VDC ................................................$277.00 Y861 Basic counter, red LED display, 8~28 VAC, 9~37 VDC........................................................$309.00Y870 Extended counter, green LED display, 85~264 VAC, 90~370 VDC......................................$320.00 Y871 Extended counter, green LED display, 8~28 VAC,9~37 VDC ..............................................$352.00 Y880 Extended counter, red LED display, 85~264 VAC,90~370 VDC ..........................................$320.00 Y881 Extended counter, red LED display, 8~28 VAC, 9~37 VDC ................................................$352.00
➍ Counter inputs: FR AC, pulses from transistors, contact closures, magn. pickup ......................N/C EP1 Analog to frequency converter (4-20 mA) ....................................................N/C EP2 Analog to frequency converter (0-1 mA) ......................................................N/CEP3 Analog to frequency converter (0-10 V) ........................................................N/CEP4 Analog to frequency converter (special range-contact factory)........................CF QD Differential or single-ended inputs from quadrature encoders ..................$43.00
➎ Other Options: /BL Keyless faceplate. Specify meter range, scale, and legend information
if desired with order information. . . . . . . . . . . . . . . . . . . . . . . . .$27.00
Ordering ModelY 861-20-0-FR has red LED display with 8~28 VAC, 9~37 VDC power,Example: open collector output and dual channel counter/timer function.
7
800Plus
Basic Counter
Frequency, rate, total (up or down), period (2 channelssimultaneously), time interval A to B, square root ofrate.
Rate, square root of rate (differential pressure or target-type flow meters).
Position or length from encoders. Accepts differential or single-ended inputs. 1x, 2x, or 4x inputs. Z channel inputs.
Type
FR
VF
QD
Extended Counter
Basic counter plus rate & total simultaneously, linearize non-lin-ear inputs, ratio, draw, arithmetic function(A * B, A / B, A + B,A — B), phase angle, stop watch, up/down counting, batchcounting.Basic counter plus rate and total simultaneously, linearize non-linear inputs, batch counting, 1 / rate (time).
Extended counter not required for QD applications
Note: Refer to product bulletin 800SP-A for complete details and specifications.
➊ ➋ ➌ ➍ ➎
PEAK DISPLAY KEY (DIGIT SELECT)In the Operating Mode, pressingthe Peak Display Key causes thepeak value of the input signal tobe displayed. Pressing the keyagain returns the display to thepresent value. In Menu Mode ,the Digit Select Key (PeakDisplay Key) is used to selectinput type and decimal point or toselect one of the five display dig-its for programming. In the mainmenu, pressing the Digit SelectKey causes the value or codethat is stored for that menu itemto be displayed and the left handdigit flashes. Each time the key ispressed, the next digit to the rightwill flash. The value of the flash-ing digit may be changed usingthe Value Select Key. In theAlarm Mode, pressing the DigitSelect Key causes the most sig-nificant digit of the displayed set-point value to flash. Digits arethen selected the same as in theMenu Mode.
RESET KEY (VALUE SELECT)In the Operating Mode, holdingthe Reset Key depressed andpressing any other key causes areset to occur. The Menu Keyresets all meter functions, theAlarm Key resets any alarmconditions and the Peak DisplayKey resets the peak value topresent value. In the MenuMode or Alarm Mode, the ValueSelect Key (Reset Key) sets thevalue of the flashing digit. Eachtime the key is pressed, thevalue increases by one. Holdingthe key down causes the digit toautomatically step through thenumbers.
ALARM KEY (REVERSE MENU)In the Operating Mode, pressingthe Alarm Key displays the set-point of Alarm 1 and then Alarm2. These values may bechanged using the Digit SelectKey and the Value Select Key. In the Menu Mode, pressing the Alarm Key steps the displaybackward through the menu.
MENU KEYThe menu key stepsthrough the variousmeter parametersthat may be selected.These menu itemsmay be “locked out”from front panelselection by softwareand hardware.
Front Panel Setup Keys
Mounting Pawl
ConnectorsThe 800Plus Universal DigitalMeter uses UL/VDE rated screw terminal connections thatplug into the mating PC jack.
Panel Mountingand CutoutEnsure the O-ring is in place.Turn the two mounting screwscounterclockwise until thespace between the mountingpawl and the bezel is greaterthan the panel thickness. Insertthe meter in the panel cutout.Turn the mounting screwsclockwise until the meter issecurely mounted in the panel.Do not overtighten the mount-ing screws.
