MT500M Tulti echnology Gas Detection
Technology Gases
Infrared Hydrocarbons
Electrochemical Toxic + Oxygen
Catalytic Combustible
CMOS Toxic & Combustible
SIL 2
3x1mm2 +SH.
Max 300mt.
0-24mA 0-24mA
TRANSMITTER
CONTROLLER
SINGLE OR DUALINDIPENDENT CHANNELS
SPLASH GUARD
INNOVATIVE NANOTECHNOLOGY HOT FIELD REPLACEMENT
SENSING ELEMENT
SINTERED FILTER CAP
(EASY TO CLEAN)
REMOTE SENSORINSTALLATION
HOT FIELD REPLACEMENTFILTER
Transducer
PRESSURIZED AIR OR STEAM/HOT WATER
INNOVATIONFIELD FILTER CLEANING
TOXIC GAS AT 0,5m FROM FLOOR
COMBUSTIBLE GAS
SPECIAL FEATURES
SINGLE OR DUAL INDIPENDENT CHANNEL UNIVERSAL TRANSMITTER SINGLE OR DUAL OUTPUT 4-20mA■ SINGLE OR DUAL SENSOR HEAD TO SINGLE OR DUAL CHANNEL■SINGLE OR DUAL SENSOR WITH
AUTOMATIC IDENTIFICATION,DIAGNOSTICAND CONFIGURATION
SINGLE DISPLAY WITH 4 LCD DIGITS or 8 LED or DUAL DISPLAY WITH 8 LCD DIGITS or 16 LED
YOUR BEST CHOICE FOR GAS DETECTION
SES-ASA ENGINEERING S.r.l.
Sede Legale / Registered Office : Via G. Galilei N. 5 20091 Bresso (MI) - Italy
Sede Oper. / Factory: Via C. Romani N.8/10 - 20091 Bresso (MI) – Italy
Tel.: +39 02 610371 - Fax.: +39 02 66507091
Web site : www.sesasa.it - E-Mail: [email protected]
Capitale / Joint Stock: € 528.383,00 - CF, IVA / FC, Vat 08082380158
R.E.A./Industr. Reg. No.253287 - C.C.I.A.A./Chamber of Comm. Reg. N. 1203948
MECHANICAL DATA:
Transmitter Housing
Material L.A copper free/S.S. 316 Heigh 125 mm
Diameter 110 mm Protection Deg. IP65Cable Entries N° 3 x ¾” NPTEpoxy Powder Painted
HC = Red TX = YellowO2 = BlueNH3 = Green
ELECTRICAL DATA: Power Supply 24VDC (15÷30VDC) Consumption MAX. 1.5 Watt Dual Analog Signals 0÷24 mA; 0÷24 mA @ 24VDC Range 0-100% FS 4-20 mA
Fault 1 mACalibration 2 mAOver range 24 mA Max.
Digital Signals : Opto isolated Contacts Fault 0.7A @ 24V Warning 0.7A @ 24VAlarm 0.7A @ 24V
Communication : Addressable MODBUS over Rs485 HART, Wireless HART
Working Temp.IR -40°C to 80°CCAT -40°C to 80°C MOS -40°C to 65°CEC
-40°C to 60°C
Accuracy IR ±2%CAT ±2% MOS ±3%EC ±2%
Zero Drift Continuously autocompensated Res. Time
0÷24mA Wiring Connection- SINGLE LINE 3-WIRES- REDUNDANT SENSOR/LINE 4-WIRES
Cable Specification Shielded cables are recommended.
MT500M Tulti echnology
T50 T90
IR < 3 < 8CAT < 8 < 20MOS < 10 < 30EC < 40 < 60
sec.
SMART MT500 is made of 3 parts:1- Universal Transmitter Controller with 4 digits or 8 LEDs display, procedure for easy maintenance. All operations and communicat ions are control led by a powerful RISC Microprocessor which provides self diagnostics, calibration and maintenance guidelines. Any type of connected transducers is automatically recognized and configured. Available with copper free marine grade light alloy housing for high salty and corrosive environments, or SS316 (both ATEX certified)2- Multi Technology Sensor with incorporated microprocessor signal transducer, housed in SS316 ATEX certified case.3- All Sensing Element are Hotfield replaceable without disconnecting power and sensor wires, within 5 minutes including auto zero calibration
DESCRIPTIONSMART MT500 is the result of OVER HALF CENTURY LIFE of experience made by Cav.(Sir)Bardoni in gas detection Design and develop products and applications to protect people and plant against fire and gas hazards.The design and features of MT500 represent “the state of the art” for Toxic and Combustible/Flammable Gas Detection.
MT 500 TRANSDUCERSMore than 20 years of research and development in Gas Detection made it possible to introduce in the market a compact, reliable and easy-maintenance product as the MT 500 Transducer, which covers all of Gas Detection fields through Catalytic,Infrared, Electrochemical and Nano MOS technologies.Each Transducer can be connected to a single, universal Transmitter,-even for remote installation up to 300 m -, regardless of what detection technology is used.Advanced electronics is encapsulated in a SS316 housing and protected by a filter cap which can be removed for cleaning or fully replaced independently of sensing element or transducer
SPLASH GUARD
FILTER CUP
SENSING ELEMENT
TRANSDUCERS/SENSOR HOUSING
FILTER MESH
TM 500 ransducersT
ONE SINGLESs316 SENSOR HOUSING
CERTIFIED II 2G Ex db IIC T6/T5
II 2D Ex tb IIIC T85°C/T100°C Db IP65FOR
ANY MT PLUG IN SENSING ELEMENT
MT 500 TRANSDUCERS
Designed to minimize industrial noise interferences.Unified protocol with CRC check through 3-wire connection.Easy maintenance and cost saving cell replacement.
Core Section and Cables Length
mm2 AWG Meters Feet
2.5 14 3000 9840
1.5 16 2000 6560
1 18 1000 3280
INFRARED
%VolHC 0-100% LELCo-Co2 %Vol
Type Cell Range 0-100% LEL
Type of Gas
0-100% LEL
HybrocarbonHydrogenCombustible
Type CATALITYC Cell Range
Type of Gas
ELECTROCHEMICAL0-XXX ppm
H2SSO2CL2Nh3O2 %
Type Cell Range
Type of Gas
0-XXX ppm
Toxic GasesCombustible Gases
Type NANO MOS Cell Range
Type of Gas
MECHANICAL DATA:
Material S.S.316Height 62.5 mm Diameter 32.9 mmTread 3/4" NPTProtection Deg. IP65Working Temp. -35°C to 75°CHumidity 0~99% RHD
ELECTRICAL DATA:
Power Supply Consumption Communication Resolution
5VDCSee Each TypeIMX MT Protocol14 Bit
APPROVALApproved according toIEC 61508 SIL2Tested by Risknowlogy
RFI/EMI protections:Certificate of Conformity n° JN04.06.132. TUVTested According to:
2004/108/EC EMCEN 55011:2009 + A1:2010EN 61000-4-2:2009EN 61000-4-3:2006 + A1:2009 + A2:2011 + IS1:2010 EN 61000-4-4:2012EN 61000-4-5:2006EN 61000-4-6:2009EN 61000-4-8:2010EN 61000-4-11:2004EN 61010-2
Area certification and Classification:
94/9/CE ATEXEN60079-0:2009EN60079-1:2007EN60079-31:2009II 2G Ex db IIC T6/T5II 2D Ex tb IIIC T85°C/T100°C Db IP65BVI 13 ATEX 0078 X
SPECIAL FEATURES