Date post: | 22-Feb-2019 |
Category: |
Documents |
Upload: | nguyencong |
View: | 213 times |
Download: | 0 times |
Due to production shutdown of the Autronica BS 100 system, there will no longer be spare parts or services available for this system after the 31st of December 2015. Apply is a experienced provider of F &G systems. A integrated Fire and Gas detection system provides the highest degree of security. We can install complete new systems or expand and upgrade existing installations.
During close cooperation with Autronica in several projects over the last decades, Apply have obtained a significant knowledge within the range of products and have established a group of Autrosafe IFG config certified engineers.
Certified partner with Autronica Fire & Security
FIRE & GAS SYSTEM (F &G)
QUAL 002
> Increased safety> Optimal detection using SelfVerify> SIL 2 approved> 24/7 Support> Live Upgrade
YOUR FIRE DETECTION SYSTEM NEEDS AN UPGRADE, YOU MAY CHOOSE HOW ...
Apply Rig & ModulesMoseidveien 17 / PO Box 4224067 Stavanger, Norway
Tel: +47 815 30 600Key Account Manager: Tor Johne ÅbøE-mail: [email protected]
CONTACT
FIRE & GAS SYSTEM (F&G)
UPGRADE YOUR OLD SYSTEM NOW – IT WILL BE WORTH WHILE
Even trustworthy systems like the
BS-series do not last forever. Due
to increased difficulties in providing
spare-parts to a system from the
1980’s, it will be wise to upgrade
your system. Prices on spares and
repairs are rapidly increasing.
CERTIFIED AS PARTNER BY AUTRONICA
Apply’s engineers have participated the
Autronica training programme and have
achieved in-depth understanding and
knowledge in Autronica´s products, to
secure high competence on both software
and hardware solutions. All dedicated
engineers have received software
licences and equipment for both doing
the configuration of the software and for
doing calculation of fire loops and power
loops.
As an approved partner Apply will work
in a close cooperation with Autronica on
new projects and upgrades or replacement
of older systems like the BS-100, In
order to provide the client with the safest
solutions and best services for your system
requirements.
THREE WAYS TO REPLACING OLD SYSTEMYou may choose to upgrade the system completely, or step by step. If you start now, you will be
able to upgrade in a flexible and affordable way. Live upgrade by replacing loop by loop.
YOUR FIRE DETECTION SYSTEM NEEDS AN UPGRADE
Apply in brief:
Apply is a leading supplier of services
and technology products to the oil &
gas industry, with 1.500 employees and
annual sales of NOK 3.1 billion (2012).
WORLDWIDE INSTALLATION
Experienced teams with high competence
and knowledge with Autronica´s Fire &
Gas Systems, will do the replacement
and commissioning of the complete
system.
Option 1: Replace the panel, keep the loop units.
Option 2: Replace the panel and detectors, keep the cabling. With base adapter existing sockets can be re-used.
Option 3: Replace the entire system. For sure you can choose to upgrade the entire system all at once. Even here, you can often use most of the existing cables. You will then have a flexible, expandable system with maximum safety and performance.
BS-100 Panel
AutroSafe panelBS100 loop interface
Protocol converterBSL-337
RS232/CL-converter
BS-100 loop
BU-70 BU-70 BU-70BU-100/101
References
Statoil:Snorre A, F & G upgrade. Replaced fire & gas field-equipment.
Statfjord B & C (ongoing)F & G upgrade. Replaced fire & gas field-equipment.
Transocean:TO Arctic, upgrade of F & G system. Integration to the Apply delivered ESD.
Installation of new HC & H2S gas detectors.
Rowan:Rowan Stavanger, integrate F & G for new LQ.
Rowan Norway, upgrade of existing F & G system.