Your simple guide to preparing and finishing wood, stone ... Flooring... · Wood flooring –...

Your simple guide to

preparing and finishing wood,stone and laminate flooring

You can bring out the natural lustre and beauty of yourwood, laminate and stone flooring and ensure a hard-wearingfinish year after year by using Liberon’s extensive range offloor treatments. We’re the choice of professionals and arehappy to offer advice on using the right Liberon product toachieve the finish you want.

In these pages you’ll find the appropriate treatment for your floor, as well as simple steps and useful tips to give you the confidence to use Liberon products to createstunning results.

Quality, reliability and safety

Premium performance is fundamental to Liberon’s values and the brand is synonymous with high quality. Thiscontinues today with many of our products being BS EN71Part 3 Approved – Safe for toys, and/or endorsed by theGuild of Master Craftsmen.

Manufacturer of quality floor finishes

BS EN71 Part 3 – Safe for toys

Guild of Master Craftsmen

Wood flooring – Preparation

L I B E R O N F L O O R C L E A N E R 3

Floor Cleaner

PurposeCleans and removes built-up waxes, dirt and grime from wooden and stone flooring without stripping offvarnishes. Ready and easy to use it will not change thenatural colour of the wood.

ApplicationSoak a pad of Liberon Steel Wool (grade 0000 or 00) withFloor Cleaner and gently scrub the surface. Allow a fewminutes for the Floor Cleaner to work then while thesurface is still wet use a clean dry cotton cloth to wipeoff all the old wax.

More than one application may be required on heavilywaxed surfaces. Allow the surface to dry out completelybefore re-finishing.

Sizes: 1 L • 5 L

LibtipDispose of used steelwool and cloths outsideto reduce vapour build-up and fire hazard.

T H I S H I G H LY E F F E C T I V E

C L E A N E R P R E PA R E S O L D A N D

E X I S T I N G W O O D E N A N D

S T O N E F LO O R I N G F O R N E W

T R E AT M E N T A N D F I N I S H I N G .

Coverage Application

Drying time Cleaning tool

Brush or steel wool

White spirit

1 L

6-8 m2

Min 2 hours

4 L I B E R O N W O O D F L O O R D Y E

PurposeWater based dye for colouring bare wooden flooringbefore varnishing, oiling or waxing. Suitable for use onhard and soft woods it can also be mixed with LiberonNatural Finish Floor Varnish and Hardwearing Floor Gel to create a tinted varnish.

ApplicationShake well before use. Apply reasonably quickly along the grain with a foam applicator or brush. Wipe off excess with a clean dry cotton cloth before it dries toeven out the colour. Avoid overlap marks on largesurfaces by working a small section at a time. A secondcoat may be applied after 2 hours if a stronger colour is required.

Care must be taken when using a water based varnishover Liberon Wood Floor Dye. Keep brush strokes to aminimum as over brushing may lift out the colour.

Size: 250 ml

LibtipIf more than one tin isrequired to complete thework, mix the tins ofdye together to ensurea uniform colour.

Coverage Application Drying time Cleaning tool

Foamapplicator or brush Water

250 ml

2-4 m2

Min 8 hours

Antique Pine

Medium Oak

Dark Oak

Victorian Mahogany

Colours

P R O F E S S I O N A L Q U A L I T Y

D Y E T H AT B R I N G S O U T T H E

G R A I N A N D E N H A N C E S I T S

N AT U R A L A P P E A R A N C E .

Wood Floor Dye

Wood flooring – Preparation

Wood Filler

PurposeTo fill deep scratches, drill holes and other damage withminimal shrinkage, good flexibility and crack-resistance.Low odour and quick drying it can be sanded, screwedand nailed as well as stained, varnished, waxed orpainted. Ideal for filling small holes and imperfections in floor boards.

ApplicationSelect the colour which is closest to that of the wood, or a shade darker, and apply using a suitable filling knife.Resist overspreading, but leave sufficient overfill toenable thorough sanding. Allow to dry thoroughly – twohours or more depending upon the depth of the repair.Sand, colour and finish as required.

Size: 125 ml

LibtipSmall holes may be filled in oneoperation. For bestresults we recommendbuilding up layers in deeper holes.

L I B E R O N W O O D F I L L E R 5

M U LT I - P U R P O S E , WAT E R- B A S E D

F I L L E R I D E A L F O R R E PA I R I N G

S U R FA C E D A M A G E T O W O O D .

Wood flooring – Repair and prepare



Painters knife

As required

Water

Usage

Interiorand

exterior

Min2 hoursdepending upon depth

Antique Pine

Dark Oak

Mahogany

Neutral

Colours

6 L I B E R O N T W O P A R T W O O D F I L L E R

PurposeReconstitutes missing sections of wood in floors duringrefurbishment. A fast curing and shrink resistant filler it can be sanded, nailed and dyed once hardened.Compatible with most finishing products it is ideal for use prior to painting.

ApplicationEnsure the surface is clean, dry and free from dust. Mix a pea size amount of hardener with a soup spoonfulof wood filler in the plastic lid. Immediately place thefiller onto the area requiring filling using a suitable fillingknife. You have a working time of 5-10 minutes and thefiller can be sanded once hardened (approximately 30 minutes).Note: Two Part Wood Filler will accept dyes/stainsdifferently to surrounding wood.

Size: 200 g

Two Part Wood Filler

Wood flooring – Repair and prepare

H A R D W E A R I N G , E P O X Y

S T R E N G T H W O O D

S U B S T I T U T E M A D E

F R O M W O O D F LO U R

A N D P O LY E S T E R R E S I N .



White spirit

Usage

5-10 minsdepending upon depth

Interiorand

exterior

Asrequired

Painters knifeLibtipAlways work withsmall quantities as the product hardensvery quickly.

Neutral

Colour

PurposeWater, heat and alcohol resistant Liberon Floor Sealer is highly effective as a final satin finish, or excellentpreparation prior to waxing with Liberon Floor Wax orvarnishing with Liberon High Resistance Floor Varnish. It enhances the natural colour of new and old wood and helps protect against stains and scratching. Alsosuitable for sealing unvarnished cork surfaces.

ApplicationSand the floor if required and remove all previousfinishes. Apply a reasonable coat of Floor Sealer with abrush, roller or cloth. Allow the oil to penetrate for 5-10minutes then remove the excess with a dry lint-free cloth.

We recommend a minimum of 3 coats. Additional coatsmay be required on porous surfaces or where greaterdurability is required. The more coats applied the higherthe sheen. Allow 24 hours before applying a wax or varnish.

Sizes: 1 L • 5 L • 25 L

L I B E R O N F L O O R S E A L E R 7

Floor Sealer

Wood flooring – Traditional finishes

A N AT U R A L , O I L B A S E D S E A L E R

A N D / O R F I N I S H F O R W O O D A N D

PA R Q U E T F LO O R S . G I V E S A S O F T

S AT I N T O G LO S S S H E E N .

LibtipOil finishes bring outthe natural colours oftimber. A wet surfacewill be an indication of the final colour.



Brush or cloth

White spirit

1 L

8-10 m2

Min 5 hours

Kitchens andbathrooms

8 L I B E R O N F L O O R W A X

PurposeNourishes and beautifies wooden flooring to protectagainst daily wear and tear. A quick drying, non-stickyproduct it buffs easily to a soft and natural sheen. Forbest results and to further enhance the grain use overLiberon Floor Sealer.

ApplicationSand the floor if required and remove all previousfinishes. Apply Floor Wax in thin coats using a brush or cloth, rubbing to ensure the wax penetrates into theheart of the wood. Allow at least 30 minutes to becometouch dry then buff to a shine. Apply further coats untilthe desired level of sheen is achieved.

Sizes: 1 L • 5 L

Floor Wax


LibtipWaxed surfaces can be slippery so avoidusing in rooms wheresurface water ispossible i.e. kitchensand bathrooms.

A W O N D E R F U L LY T R A D I T I O N A L A N D

C L A S S I C F I N I S H F O R B O T H N E W

A N D R E C L A I M E D W O O D E N F LO O R I N G

A N D C O R K L I N I N G S . I D E A L F O R U S E

I N D I N I N G R O O M S A N D B E D R O O M S .



Brush or cloth

White spirit

Hard wearing

1 L

12-15 m2

Min 30 mins

PurposeDesigned for use on all types of untreated real woodfloors Liberon Floor Oil provides a water, heat andalcohol resistant finish that enhances the natural colourand grain of the timber. Due to excellent water resistantproperties it is ideal for use in kitchens and bathrooms.

ApplicationSand the floor if required and remove all previousfinishes. Apply with a brush, cloth or roller working withthe grain of the wood wherever possible. Allow the oil topenetrate for 10-20 minutes then wipe over the surfacewith a clean, dry, lint free cloth to remove any excess oil.

A minimum of three coats is recommended, sandinglightly between coats. More coats may be required onporous timbers or for a more durable finish. Allow 12hours between coats and 24 hours after the last coat before use.

Sizes: 1 L • 2.5 L

L I B E R O N F L O O R O I L 9

Floor Oil


A B L E N D O F N AT U R A L O I L S A N D

R E S I N T H AT P R O V I D E S A D U R A B L E

A N D S C R ATC H R E S I S TA N T F I N I S H .

LibtipOily cloths can self-combust. Do not leaveimpregnated cloths inbundles. Beforediscarding lay themflat outside to dry toavoid a fire hazard.



Brush, cloth or roller

White spirit


1 L

10-12 m2

Min 12 hours

10 L I B E R O N N A T U R A L F I N I S H F L O O R V A R N I S H

PurposeHighly resistant and exceptionally durable Natural FinishFloor Varnish can be used throughout the family home.Suitable for use on soft or hardwood flooring it is quickdrying and non-yellowing. May be mixed with LiberonWood Floor Dyes to create unique colour tones.

ApplicationSand the floor if required and remove all previousfinishes. Apply a reasonable coat of varnish evenly usinga paint brush or short hair roller and allow to dry for aminimum of 2 hours. We recommend a minimum of 3coats are applied, sanding lightly between coats. Morecoats may be required for heavy traffic areas. Allow 24hours for the final coat to dry before using the floor.

To create a tinted varnish add one 250 ml Liberon WoodFloor Dye to one 2.5 L tin of Natural Finish Floor Varnishand mix thoroughly.

Sizes: 750 ml • 2.5 L

LibtipApply successive coatsin a criss-cross format(right to left then leftto right) with the finalcoat in the direction ofthe grain.

Finishes

•Clear Matt

•Clear Satin

•Wax Effect – Light Oak



Brush or roller

Water

1 L

10-12 m2

Min 2 hours

High resistance

Natural Finish Floor Varnish isapproved to European Eco-labelrequirements

• a limitation of air pollution by solvents

• the absence of heavy metals and substances harmful for the environment and health

• reduced sulphur emissions during production

• good performance for indoor use.


Natural Finish

Floor Varnish

Wood flooring – Varnish finishes

A S U P E R I O R , E N V I R O N M E N TA L LY

F R I E N D LY, WAT E R B A S E D VA R N I S H

T H AT M A I N TA I N S T H E N AT U R A L F E E L

A N D LO O K O F T H E T I M B E R .

PurposeA quick drying, non-drip varnish for use on stairs andother upright areas such as balustrade that is resistant to heel impact and wear and tear. May be mixed withLiberon Wood Floor Dyes to create unique colour tones.

ApplicationSand the floor if required and remove all previousfinishes. Apply a reasonable coat of varnish evenly usinga brush and allow to dry for a minimum of 2 hours. Werecommend a minimum of 3 coats are applied, sandinglightly between coats. More coats may be required forheavy traffic areas. Allow the final coat of varnish 24hours drying time before using the floor.

To create a tinted varnish add one 250 ml Liberon WoodFloor Dye to one 2.5 L tin of Hardwearing Floor Gel andmix thoroughly.

Size: 2.5 L

L I B E R O N H A R D W E A R I N G F L O O R G E L 11

Hardwearing

Floor Gel


D U R A B L E A N D H I G H P E R F O R M A N C E

WAT E R B A S E D VA R N I S H F O R S O F T

A N D H A R D W O O D F LO O R I N G .

LibtipWe recommend LiberonWood Floor Dye is onlyadded to the varnishfor the first coat andthat subsequent coatsare varnish only.

Finish

•Clear Satin



Brush or roller

Water

Hard wearing

1 L

10-12 m2

6 hoursbetween

coats 24 final

High resistance


12 L I B E R O N P R E - V A R N I S H F O R W O O D F L O O R S

PurposeRecommended for use on bare wood or sanded floorsPre-varnish reduces the darkening of the wood and helpsprevent tannins rising to keep the original beauty of thetimber when it is varnished. Reinforcing the durability andadhesion of varnish it is designed for use with solventbased products such as Liberon High Resistance FloorVarnish. Ideal for use on old pine and oak.

ApplicationEnsure the surface is clean, dry and free from previousfinishes. The product has a milky appearance whichdisappears after application. Apply one coat evenly usinga brush or roller. Allow to dry for a minimum of 1 hour,lightly sanding the surface with a fine sand paper beforeapplying a finish of varnish.

Sizes: 750 ml • 2.5 L

Pre-varnish for wood floors


LibtipApply varnish plankby plank while facingthe sunlight so you cansee exactly how muchexcess or missed areasyou are dealing with.

U N I Q U E A N D I N N O VAT I V E P R O D U C T

T H AT E N S U R E S A LO N G L A S T I N G

A N D Q U A L I T Y F I N I S H T O W O O D

A N D PA R Q U E T F LO O R I N G .



Brush or roller

Water

1 L

8-10 m2

Min 1 hour


PurposeSuited to rooms that are in constant use such askitchens, lounges and hallways High Resistance FloorVarnish offers a high quality stain and water resistantfinish in 24 hours. Its low odour formula and slip-resistant surface make it ideal for use in the family home.

ApplicationSand the floor if required and remove all previousfinishes. If a stained floor is desired apply Liberon FloorDye prior to the varnish.

Apply High Resistance Floor Varnish evenly with a brushor short hair roller. Allow to dry for a minimum of 6hours. We recommend a minimum of 3 coats are applied,lightly sanding the surface between coats. More coatscan be applied for a more durable finish or where foottraffic is particularly heavy. Allow the final coat of varnisha minimum of 24 hours drying time before using the floor.

Size: 2.5 L

L I B E R O N H I G H R E S I S T A N C E F L O O R V A R N I S H 13

High Resistance

Floor Varnish


A P O LY U R E T H A N E VA R N I S H AT 6 0 % T H E

H A R D N E S S O F G L A S S T H AT P R O V I D E S

E X C E P T I O N A L P R O T E C T I O N F O R

W O O D E N F LO O R I N G A N D A S U P E R I O R

R E S I S TA N C E T O F O O T T R A F F I C .

LibtipIdeal applicationconditions for a varnish are between12°C and 25°C.

Finishes

•Clear Matt

•Clear Satin

•Wax Effect – Light Oak



Brush or roller

White spirit

1 L

10-12 m2

6 hoursbetween

coats 24 final


High resistance

14 L I B E R O N W O O D F L O O R R E V I V E R

PurposeRevives and conditions worn varnished flooring bymasking minor scratches and marks. Ideal for regularmaintenance it protects against everyday wear and tear,producing a tough and durable satin to gloss finish.

ApplicationApply a thin coat of diluted Wood Floor Reviver (2 partsWood Floor Reviver to 1 part water) evenly to the surfaceusing a sponge, mop or floor cloth and allow to dry for aminimum of 30 minutes. On heavy traffic areas or badlyworn surfaces apply a second coat once the first coat has dried thoroughly.

Size: 500 ml

Wood Floor Reviver


LibtipSimply re-apply WoodFloor Reviver as soonas the surface begins tolook tired.

A C L E A R , A N T I - S L I P C O AT I N G

T H AT P R O T E C T S A N D E X T E N D S

T H E L I F E O F VA R N I S H E D A N D

P R E -VA R N I S H E D W O O D E N A N D

PA R Q U E T F LO O R I N G I N A S I M P L E

O N E - S T E P A P P L I C AT I O N .



Cloth or mop

Water

Diluted 500 ml

25-35 m2

Min 30 mins

Non-slip

PurposeEffective removal of dirt and stubborn marks left bygrease, shoes and mud on laminate flooring. Suitable foruse on most laminate and vinyl flooring it restores lustreto the surface and leaves a slip resistant finish. Alsocontains anti-static agents to slow down the depositionof dust.

ApplicationFor general cleaning add one cap full of Laminate Cleanand Seal to 5 L of warm water. Wash the floor using acloth or sponge mop and allow to dry. To removestubborn marks treat the affected area with a smallamount of neat Laminate Clean and Seal using a softscrubbing brush or cloth. To aid drying time wipe overwith a dry cloth.

Size: 1 L

L I B E R O N L A M I N A T E C L E A N A N D S E A L 15

A H I G H Q U A L I T Y,

C O N C E N T R AT E C L E A N E R

A N D C O N D I T I O N E R F O R

L A M I N AT E , V I N Y L A N D

L I N O L E U M F LO O R I N G .

LibtipUse the same amountof Clean and Seal tocondition your lino orvinyl floor, but allow alittle longer to dry.

Laminate Clean and Seal

Laminate flooring



Cloth or mop

Water

200 ml

5 L water

Min 30 mins

16 L I B E R O N L A M I N A T E R E V I V E R

PurposeRevives and restores the protective layer of laminate andvinyl flooring in a simple one-step application. Helps hidescuff marks and scratches while reducing long term wearand tear.

ApplicationEnsure the floor is clean and dust free. Apply a thin coatof Laminate Reviver evenly to the floor using a sponge,mop or floor cloth and allow to dry for 30 minutes. Onheavy traffic areas or badly worn surfaces apply a secondcoat once the first coat has dried thoroughly.

Size: 1 L

Laminate Reviver

Laminate flooring

LibtipFor a higher shineapply further coats of Laminate Reviver as above.

T O U G H A N D

D U R A B L E A N T I - S L I P

R E V I V E R F O R

L A M I N AT E A N D

V I N Y L F LO O R I N G .



Water

1 L

40-50 m2

Min 30 mins

Cloth or mop

Non-slip

PurposeFor filling medium to deep scratches and poor fittingjoints in laminate flooring. Ideal for nail and pin holes thecolours can be blended together to match the surface.

ApplicationSelect the colour stick closest to that of the laminatethat requires filling. If in doubt choose a colour that isslightly darker than the laminate.

Rub the repair stick across and along the scratch until itis completely filled. Allow the wax to harden then buffusing a soft, lint-free cotton cloth. For superficialscratches and scuffs use Liberon Laminate Reviver.

Size: set of 3 BP

L I B E R O N L A M I N A T E R E P A I R S T I C K S 17

E A S Y T O U S E R E PA I R

S T I C K S T H AT D O N O T

R E Q U I R E S A N D I N G .

LibtipAlways test productsfirst on a spare surfaceor an inconspicuousarea to check colour,compatibility and end result.

Laminate Repair Sticks

Laminate flooring

18 L I B E R O N S T O N E F L O O R C L E A N E R

PurposeRemoves built-up layers of dirt, grease and Liberon StoneFloor Shine from previously sealed and unsealedterracotta and natural stone flooring. Can be used neaton stubborn stains.

ApplicationDilute Stone Floor Cleaner to a 25% solution in warmwater. Apply using a floor mop or sponge, rubbing morevigorously over dirty areas. Allow the product to work onthe surface for 10-15 minutes then rinse with clean warmwater and allow to dry thoroughly.

To remove stubborn stains pour a small amount of neatStone Floor Cleaner onto the stain. Let the product workfor 15 minutes then scrub with a brush to remove thestain. Rinse and allow to dry.

Sizes: 1 L • 5 L

Stone Floor Cleaner

Stone flooring

LibtipIf treating new stone,once your floor hasbeen cleaned it willneed protecting fromwater and stainingwith a suitable sealer.

E A S Y T O U S E WAT E R

B A S E D C L E A N E R

F O R T H E G E N E R A L

M A I N T E N A N C E O F

S T O N E F LO O R S .

Application Cleaning tool

WaterCloth or mop

Coverage

1 L

15-20 m2

Drying time

Min 1 hour24 hours prior to refinishing

PurposeFeeds, seals and protects interior terracotta, slate, Yorkstone and many similar types of porous stone flooring.Makes the surface resistant to water, drink and foodspillages and helps to reduce dusting and crumbling.

ApplicationEnsure the surface is clean and dry. Apply ColourEnhancer Stone Floor Sealer using a brush or lint-freecotton cloth and allow the sealer to penetrate for 10minutes. Remove the excess with a clean lint-free cottoncloth and dry for a minimum of 8 hours.

Check the surface is properly sealed by dropping a smallamount of water onto it. Leave for 10-15 minutes. If itremains on the surface enough sealer has been applied, if not then further coats are required. Finish with LiberonStone Floor Wax, or for a more durable surface withStone Floor Shine.

Note: several coats may be applied quickly on veryporous surfaces. The number of coats required willdepend upon the porosity of the stone.

Sizes: 1 L • 5 L

L I B E R O N C O L O U R E N H A N C E R S T O N E F L O O R S E A L E R 19

O I L B A S E D M U LT I - S T O N E S E A L E R

W I T H S T R O N G WAT E R- R E S I S TA N T

Q U A L I T I E S T H AT A D D S WA R M T H

T O N AT U R A L S T O N E B Y

E N H A N C I N G T H E C O LO U R .

LibtipA simple test willidentify whether aparticular stonerequires sealing. Justput several drops ofwater onto the stonesurface and leave for10 minutes. If thewater is absorbed intothe stone then a sealeris required.

Colour Enhancer

Stone Floor Sealer

Stone flooring

Application Cleaning tool

Brush or cloth White spirit

Drying time

Min 8 hours24 hours prior to refinishing

Coverage

1 L

10-15 m2

20 L I B E R O N N A T U R A L F I N I S H S T O N E F L O O R S E A L E R

PurposeHighly effective sealer for protecting interior terracotta,slate, York stone, ceramic, marble and many similar typesof porous stone flooring. Makes surfaces resistant towater, stains, food oils and grease marks. Ideal for new orold stone and effective after just one coat on mostsurfaces.

ApplicationApply Natural Finish Stone Floor Sealer generously with apaint brush and allow to dry for one hour. Check if thesurface is properly sealed by dropping a small amount ofwater onto the floor. Leave for 10-15 minutes and if thewater remains on the surface then enough sealer hasbeen applied. If not then further coats are required.Repeat until properly sealed.

Allow the final coat 24 hours to dry before use. Ifrequired finish with Liberon Stone Floor Wax, or for amore durable surface with Stone Floor Shine.

Sizes: 1 L • 5 L

Natural Finish

Stone Floor Sealer

Stone flooring

LibtipCarry out the drop testonce a year to checkyour floor is properlysealed and re-applysealer as necessary.

N O N - C O LO U R I N G WAT E R

B A S E D S E A L E R T H AT

M A I N TA I N S T H E N AT U R A L

LO O K O F T H E S T O N E .

Coverage Application Drying time Cleaning tool

WaterBrush

1 L

10-12 m2*

1 hourto touch

24 hours final

*depending upon porosity

PurposeProtects and nourishes stone, slate, terracotta, quarry tileand other natural and man-made stone floor productsafter sealing. The slip resistant finish enhances thenatural colour of the stone, helps prevent staining and isresistant to scratching and scuffing. Ideal for use indining rooms and conservatories.

ApplicationEnsure the surface is clean, dry and free from previousfinishes. Apply a thin layer of Stone Floor Wax to thefloor using a cotton lint-free cloth or suitable brush,ensuring the wax is applied evenly across the surface.Allow to dry for 1-2 hours then buff to a satin sheenusing a brush, cotton cloth or buffing machine.

Sizes: 1 L • 2.5 L

L I B E R O N S T O N E F L O O R W A X 21

A H A R D W E A R I N G A N D

T R A D I T I O N A L S AT I N

F I N I S H F O R S E A L E D

S T O N E , G I V I N G A

B E A U T I F U L S O F T L U S T R E

T O T H E S U R FA C E .

LibtipsDo not wash waxedfloors with water.Simply sweep orvacuum and re-waxwhen the surface looksdry and dull.

Where surface water ispossible, i.e. kitchensand utility rooms,Liberon Stone FloorShine is recommended.

Stone Floor Wax

Stone flooring



Brush or cloth

White spirit

1 L

10-12 m2

2 hours

22 L I B E R O N S T O N E F L O O R S H I N E

PurposeCreates a protective and durable coating with long lastingshine that is ideal for use in areas of high foot traffic suchas kitchens and halls. It is also stain and water resistant.

ApplicationEnsure the surface is clean and dry. Dilute 3 parts StoneFloor Shine to 2 parts warm water. Apply a thin coat ofStone Floor Shine evenly over the whole surface using amop or sponge. Leave to dry for 30-60 minutes and theshine will appear. On new surfaces and for a higher shineapply additional coats.

Sizes: 1 L • 5 L

Stone Floor Shine

Stone flooring

LibtipDo not apply in thickcoats as this mayresult in white marks.Build-up the shine inthin layers.

Q U I C K D R Y I N G A N D

S E L F- S H I N I N G F I N I S H

F O R S E A L E D

T E R R A C O T TA A N D

S T O N E F LO O R S .



Mop or sponge

Water

1 L

15-20 m2

30-60mins

High resistance

P R O D U C T O V E R V I E W 23

Product overviewProduct Coverage Application Drying time Cleaning Sizes Low GMC EN71 High Kitchens &

tool odour Part 3 resistance bathrooms

Wood flooring

Floor Cleaner 1 L Brush or Min White Spirit 1 L6-8 m2 steel wool 2 hours 5 L

Wood Floor Dye 250 ml Foam applicator Min Water 250 ml ✔ ✔2-4 m2 or brush 8 hours

Wood Filler As required Painter’s knife Min Water 125 ml2 hours

Two Part As required Painter’s knife Min White Spirit 200 g ✔Wood Filler 30 minutes

Floor Sealer 1 L Brush or cloth Min White Spirit 1L✔ ✔ ✔8-10 m2 5 hours 5 L

25 L

Floor Wax 1 L Brush or cloth Min White Spirit 1 L✔12-15 m2 30 minutes 5 L

Floor Oil 1 L Brush, cloth Min White Spirit 1 L✔ ✔10-12 m2 or roller 12 hours 2.5 L

Natural Finish 1 L Brush or roller Min Water 750 ml✔ ✔ ✔ ✔ ✔Floor Varnish 10-12 m2 2 hours 2.5 L

Hardwearing 1 L Brush or roller Min Water 2.5 L ✔ ✔ ✔Floor Gel 10-12 m2 6 hours

Pre-varnish 1 L Brush or roller Min Water 750 ml✔ ✔8-10 m2 1 hour 2.5 L

High Resistance 1 L Brush or roller Min White Spirit 2.5 L ✔ ✔ ✔Floor Varnish 10-12 m2 6 hours

Wood Floor 500 ml Cloth or mop Min Water 500 ml ✔Reviver 25-35 m2 30 minutes

Laminate flooringLaminate Clean 200 ml in Cloth or mop Min Water 1 L ✔and Seal 5 L water 30 minutes

Laminate Reviver1 L Cloth or mop Min Water 1 L ✔40-50 m2 30 minutes

Stone flooringStone Floor 1 L Cloth or mop Min Water 1 LCleaner 15-20 m2 1 hour 5 L

Colour Enhancer 1 L Brush or cloth Min White Spirit 1 L✔ ✔Stone Floor Sealer 10-15 m2 8 hours 5 L

Natural Finish 1 L Brush Min Water 1 L✔Stone Floor Sealer 10-12 m2 1 hour 5 L

Stone Floor Wax 1 L Brush or cloth Min White Spirit 1 L✔10-12 m2 2 hours 2.5 L

Stone Floor Shine 1 L Mop or sponge 30-60 Water 1 L✔ ✔ ✔15-20 m2 minutes 5 L

Liberate the spirit of your home

Liberon Limited, Learoyd Road, Mountfield Industrial Estate, New Romney, Kent TN28 8XU Tel: 01797 367555 Fax: 01797 367575 Technical advice: 01797 361136 www.liberon.co.ukA V33 Group company.

We’re as effective outdoors! For details of our comprehensive garden range call us on 01797 367555.

O U R P L E D G E . YO U R G UA R A N T E E .

L I B E R O N H A S D E V E LO P E D M A R K E T- L E A D I N G , I N N OVAT I V E W O O D

A N D S T O N E T R E AT M E N T P R O D U C T S F O R OV E R A C E N T U RY,

A L L O U R P R O D U C T S A R E G UA R A N T E E D T O P R OV I D E E F F E C T I V E ,

LO N G - L A S T I N G R E S U LT S W H E N A P P L I E D C O R R E C T LY.

I F YO U H AV E A N Y Q U E S T I O N S A B O U T T H E S E L E C T I O N O R U S E

O F L I B E R O N F LO O R I N G P R O D U C T S S I M P LY C O N TAC T L I B E R O N

T E C H N I C A L S E R V I C E S O N 0 1 7 9 7 3 6 1 1 3 6 F O R E X P E RT A DV I C E .

Date post:	12-Jul-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Your simple guide to preparing and finishing wood, stone ... Flooring... · Wood flooring –...

Documents