Your technical partners for West Africa & Beyond
YOUR TECHNICAL PARTNERS FOR WEST AFRICA & BEYOND
Oil & Gas Division
Hidramar is a service company located in Las Palmas Port, Gran Canaria. We have been offering services and technical assistance to the Oil & Gas industry and Naval sector since 1989.We are owners of the quality assurance certificates ISO 9001:2008, welders approvals and weld procedures approvals.
With large facilities at our workshop, skilled employees and high tech machinery unique in the Canary Islands, Hidramar diagnose and solve problems on board all your installations and are available 24 hours / 7 days per week.
Hidramar want to be your technical partner in West Africa and Beyond.
Maintenance of all Hydraulic / Pneumatic Systems of any size and complexity.
R.O.V Systems Xmas Trees B.O.P´s Cranes Mooring & Anchor Winch Systems Top Drives Iron Roughnecks Tension Systems Tuggers Manriders
Design and Installation of High pressure Low pressure piping Systems to any size.
Ballast Fuel Oil Fire Fighting Mud Water
We can weld almost in all types of materials and procedures.
Stainless steel Carbon Steel Aluminium Cuni
Mechanical, Industrial Repair and Assembly
Marine Engines Variable Pitch Propellers Impellor Pumps Boiler Repair Plate Heat Exchangers Air Condition Systems Cranes Pipe Handling / Bucking Machines
Machining Services
CNC Machining Boring Grinding Honing Milling Threading
All types of Inspection
NDT MPI Ultrasonic Hull Thickness Measurments Gas free certificates
We have a vast experience in design, manufacture and supply of all types of major project´s and examples of these can be seen in the following pages
www.hidramar.com
Manpower supply and technical expertise to all your installations whether onshore or offshore
Efficient and effective project management is the key to the sucessful delivery of our projects and services.
Proffesional care and safe deliverySedco Energy
Main Air Condition Pump. Overhaul and recomission.
B.O.P. Hydraulic Accumulator recomission and recondition of the B.O.P Frame steelwork.
Remove main seawater cooling pump strainers and valves for entire Sedco Energy cooling system. 180 valves in all.
Install new valve in hydrafone tank for sonar device.
Overhaul and replace all low pressure mud lines and valves from the mud pits right through to the high pressure mud pumps.
Complete overhaul of all 4 pump room ballast systems.
Complete overhaul of anchor fairleads. 8 units in total.
Overhaul Hydraulic System for variable pitch propellers, also repair of two of the main pumps.
Complete Overhaul of Hydraulic and Mechanical deck machinery.
Electric-Hydraulic Powered Gantry Crane with integrated HPU: Vertical Pipe handling system Iron Roughneck Torquemaster
Renew all Hydraulic hoses in the Top drive Manufacture 3 new Skimmer tanks (45 M3) and reconfigure pipe system.
References: John Barron. Project manager Yashin Chahin. Project manager
Invoiced hours: > 34.000 hrs.Date: 03/2011 - 08/2011 www.hidramar.com
Giving extra quality and effortGSF Jack Ryan
Overhauled mud valve and pipe works at Mezzanine deck. Installation of a new Pneumatic system for control of the Mud Valve Actuators at mezzanine Deck Fabricate and Install two platforms for Centrifuges.
Remove and renew all hydraulic hoses on the Lower Marine Riser Package of the B.O.P. and re-commission.
Supply Mechanics for repairs in the Engine room.
Complete flushing, Overhaul and re-commission of Drill String Weight Compensator in Derrick.
Assist Sparrows in removing complete Seatrax crane from pedestal and installation of new crane.
Hidramar also completely overhauled the Hydraulics’ on the 3 further cranes onboard.
Complete mechanical overhaul and refurbish of B.O.P Transporter in the Moon pool area.
Maintenance on seals motors and pins on Canister thruster rooms Nº 1 and Nº 2.
Remove and refurbish High Pressure Valves and drainage valves in the Heave compensator and High Pressure air system (72 bottles), and inspect all with endoscopic camera.
References: Walter Hunter. Project ManagerInvoiced hours: > 22.000 hrs. Date: 11/2010 - 12/2010
Working on ThrustersODN Tay IV
Thruster replacement and ballast valve system re-commissioning.
Wartsila azimuth thruster replacement, mechanical works, rigging work, divers activities, lifting plan and commissioning.
Overhaul several valves of the ballast system.
References: Jose Pitta. Project manager.
Invoiced hours: > 2.000 hrs.Date: 02/2012 - 03/2012 www.hidramar.com
Technical workshopHidramar
Electro mechanicalWorkshop
Foto propiedad de la Autoridad Portuaria de Las Palmas
Large repair dockLas Palmas Port
Equipment rectificationSubsea
Las Palmas Port (Spain, EU.)Strategic geographical location. Excellent conditions of its bay.Perfect weather conditions for repairing works along the whole year.High quality complementary services.Along the main sea routes between Europe, Africa and America. Foto propiedad de la Autoridad Portuaria de Las Palmas
HidramarTechcnical workshop
SubseaEquipment rectification
ElectromechanicalWorkshop
Efficiency and hard workSedco Express
References: Vernon Smith. Project manager
Invoiced hours: > 28.000 hrs.Date: 07/2010 - 09/2010
Remove the main Seawater Cooling Pump Strainers and Valves for the entire Sedco Express cooling system.
Install a new valve in Hydrophone Tank for Sonar device.
Overhaul and replace Low Pressure Mud Lines and Valves from the mud pits to the High Pressure Mud Pumps.
Renewal of the firefighting system pipelines as per program.
Major pipeline works in the Settling Tank Compartment of the mud pit system and refurbishment of the main mud valves.
Main Air Condition system overhaul and re commission.
Renew main Sea Chest pipes in the 4 ballast pump rooms.
Recommission B.O.P. Hydraulic Accumulators and recondition the steelwork on frame.
Renewal of a multitude of Air Conditioning Ducts.
Complete overhaul of the valves on the main ballast system.
Complete overhaul of Anchor Fairleads. 8 units in total.
Complete Overhaul of Hydraulic and Mechanical deck machinery
Renew the Hydraulic hoses on a multitude of different equipment on the Drill floor and in the Derrick.
•Modification and installation of the helicopter fuel system and installation of a new flowmeter• Renew HP Air line for compressor APV• Renew around 130 mts. Stainless pipe and valves for bunkering fresh water line in Water Plant• RO Water Fresh Portable in Water Plant• Renew and replacement of around 210 meters of gas test well pipe till the flare boom.•30.000 psi high pressure test in drilling system pipes•Installation of supports for the access ladder between kea side-auxiliary barge and auxiliary barge-rig•Complete Installation of the new sewage system• Installation of the new fresh water line through the accommodation Works for WESTCON:•Installation of Hydraulic Lines for the Davit HPU•Prefabricating brackets, plates and knee plates conjunction•Prefabricating ventilations conduit•Logistic support for the project
Works for OTECH:•Impressed cathodic current protection system implementation (ICCP)•Complete overboard valves overhaul to meet Special Periodic Survey requirements •Installation of anodes in ballast tank•Mobilizations of the equipment for diving jobs and logistic support
Works for NOV:•Four Marine Riser Tensioner (MRT) overhaul•Main hydraulic installation flushing
www.hidramar.com
The norwegian challengeEirik Raude
References: Pål Eikrem. Project Manager.
Invoiced hours: > 29.000 hrs.Date: 10/2012 - 12/2012
Oil States Industries, Inc. is a subsidiary of Oil States International, Inc., headquartered in Arlington, Texas (USA), with locations in 11 countries and more than 1,700 employees worldwide. They are a leading manufacturer of deepwater production products and subsea pipelines with innovative solutions for industry demands.
Hidramar has recently reached an agreement with Oil State to provide these services in Las Palmas Port Area.
partner at Las Palmas PortProud to be Oil States Kapler’
Oil States Industries has been providing products, services and support to the offshore industry for more than 30 years. Products range from simple grout packers for jacket installation to advanced deepwater diverless pipeline equipment and the unrivalled riser FlexJoint®.
Regardless of function or complexity, Oil States provide the highest-quality solution, based on extensive experience backed by world-class engineering standards.
Strategic AliancesOur Partners
Hidramar has established strategic alliances with suppliers from the following specialized services in order to supply you with a complete solution:
Works and Underwater inspection. Maintenance and repair of Electrical and Electronic systems. Rope Access. Scaffolding. N.D.T. Engineering and consulting. General provisioning to all vessels. Marine supplies. Fenders. Life rafts. Safety clothing and equipment. Bonded stores. Distribution of fuel. Paint jobs. Fluorescent signals. Nautical charts and publications.
Hidramar also maintain a large stock of branded components fittings, pipes, hoses, seals, gaskets, coolers and hydraulic tools and have earned an unrivalled reputation for speed and efficiency to requests here in Las Palmas and beyond.
In conjunction with our partners we have available for all your needs over 500 highly skilled and qualified workers at our fingertips therefore you can be assured your Project is in good hands whether onshore or offshore.
With our long standing dedication, expertise and investment in our people we have Project managed and maintained the delivery of large project’s to our client’s standards, time and time again on time and below budget.
www.hidramar.com
website: www.hidramar.com
Hidramar S.L.Harald Flick St. Las Palmas de Gran Canaria. 35008 Canary Islands Spain
Our Workshop• Four conventional lathes with up to 6,000 mm between centers.• C.N.C. lathe.• Particle Counter & fluxin groups.• Test bench to power exceeding 290 hp.
• Portable test bench for troubleshooting diagnosis.• Flushing Group of variable flow and 25 KW.• Boring fixed to 3600 mm and 6000 kg axel.• Chrome plating plant for hydraulic cylinders.
• Hydraulic cylinders repair center with up to 8,600 kg / m. capacity.• Honing of Hydraulic Cylinder liner’s. Capacity more than 6000 mm in length.• Drill Presses.
www.hidramar.com
Central Atlantic Ocean
North Africa
United Kingdom
Madrid
Las Palmas
To Ivory Coast /West Africa
North Sea
Aberdeen (Scotland)
To Norway /Artic Sea
Hidramar UK
Hidramar Spain
To Brazil & South
America
Mediterranean Sea
London
Paris
Barcelona
Stavanger
Europe
To Cyprus
website: www.hidramar.com
Hidramar UK Ltd.Queens Road. Aberdeen. United Kingdom