YSHIELD Project Examples

YSHIELD Shielding Paints Project Examples

Project carried out by YSHIELD Australia using HSF‐54 shielding paint and Eco 30 shielding fabric.

1) Shielding paint begins to be applied only on affected areas.

2) High reading of 146 microwatts per metre squared in child`s bedroom in front of house.


EMR Shielding of single level home from 3G mobile phone tower

3) Front of house shielded with HSF‐54 shielding paint.

4) Over painting is easy with two coats of normal exterior paint.

6) Child`s bedroom now only reading 0.30 microwatts per metre squared after

shielding.

5) Inside of child`s bedroom windows at front of house shielded with Eco 30 shielding

fabric.

Customer Services: Tel: 09077 9842 Email: [email protected] Post: YShield 47 Auburn Rd, Hawthorn, Victoria


EMR Shielding of family room from concealed phone tower only 60m away. Project carried out by YSHIELD Australia using HSF‐54 shielding paint.

1) 3G Mobile phone tower hidden in church spire. 2) Mobile phone tower visible only 60m from family room.

EMR Shielding of family room from 3G mobile phone tower

3) Room being prepared for shielding paint application.

4) High reading of 186 microwatts per metre squared pre shielding.

5) Shielding paint about to be applied. 6) Shielding paint is applied.




7) Shielded room. 8) Two quick easy coats of acrylic wall paint cover the black shielding paint.


EMR Shielding of family room from 3G mobile phone tower

9) Finished family room.

10) Excellent low reading of 0.93 microwatts per metre squared after shielding.




EMR Shielding of children`s playroom close to mobile phone tower. Project carried out by YSHIELD Australia using HSF‐54 shielding paint.

1) Playroom before shielding. 2) Very high EMR reading of 1860 microwatts per metre squared prior to shielding.


EMR Shielding of children’s playroom from 3G mobile phone tower

3) Shielding paint HSF‐54 is applied. 4) Affected parts of playroom shielded.

5) Finished over painted playroom. 6) Fantastic low reading of 0.21 microwatts per metre squared achieved in shielded playroom.




EMR Shielding of central city office exposed to a bank of mobile phone towers, one only 7m away. Project carried out by YSHIELD Australia using HSF‐54 shielding paint and Eco 30 shielding fabric.


EMR Shielding of central city office in Melbourne CBD

1) View from office window. 2) One mobile phone panel only 7m from the office window.

3) Extremely high reading of 10649 microwatts per metre squared before shielding.

4) Member of Green painters gets to work applying shielding paint.

5) Shielding paint being applied. 6) Finished shielded office after overpainting.




7) Completed over painted office with shielded window using Eco 30 shielding fabric.


EMR Shielding of central city office in Melbourne CBD

8) Very low reading of` 2.9 microwatts per metre squared after shielding.





EMR Shielding of modern Melbourne family home

EMR Shielding of modern family home in Melbourne. Project carried out by YSHIELD Australia using HSF‐54 Shielding paint.

1) Mobile phone tower viewed from back yard of family home.

2) High reading of 121 microwatts per metre squared inside family kitchen.

3) Back part of house now shielded on the outside, only in affected areas.

4) Back part of home shielded.

6) Readings now very low at only 0.94 microwatts per metre squared in the kitchen.

5) Over painting in progress.




EMR Shielding of two rooms in an office from five mobile phone panels on the exterior of the wall. Project carried out by YSHIELD Australia using HSF‐54 paint and Eco 30 shielding fabric.

1) This top floor office is surrounded by mobile phone panels, four on the outside of the

office wall and one by the window arch.

2) The meter reading on the inside of the small office is extremely high, with a reading of 11533 microwatts per metre squared.


EMR Shielding of a Melbourne office from five mobile phone panels

3) One of the mobile phone panels is right next to the window (see right hand side).

4) The meter reading next to the window is high at 2281 microwatts per metre squared.

5) To make a difficult situation worse, there are also mobile phone towers on an adjacent

building adding to the EMR.

6) The larger office also records a high reading of 447 microwatts per metre squared.





EMR Shielding of Melbourne office from 5 mobile phone panels

7) The larger office walls shielded with YSHIELD paint, before being overpainted.

8) Now shielded, meter reading in the larger office is down to only 1.34 microwatts per metre squared.

9) The smaller office walls shielded with YSHIELD paint.

10) The smaller office starts to be over painted after shielding.

11) The smaller office now over painted. .

12) After shielding with Eco 30 Shielding fabric, meter reading is down to a tiny 0.88

microwatts per metre.




EMR shielding of the whole exterior of a Victorian home only 30m from a mobile phone tower. Project carried out by YSHIELD Australia using HSF‐54 shielding paint and Eco 30

2) Exterior of home is painted with HSF 54 shielding paint.


EMR Shielding of Victorian home only 30m from a mobile phone tower


3) Front of the house entirely shielded.

1) High reading of 1780 microwatts per metre squared next to interior bedroom window prior to shielding with paint and curtains.

5) The side of house in the process of being over painted.

4) The side of the house is also painted with HSF 54 shielding paint and fully shielded.

6) Front of house over painted and shielding complete.



8) Very low reading of only 0.23 microwatts per metre squared taken next to interior bedroom window after shielding paint and curtains.


EMR Shielding of Victorian home only 30m from a mobile phone tower


7) Eco 30 shielding fabric curtains are hung at the bedroom windows.



EMR Shielding of offices located on first floor of shopping centre, underneath mobile phone tower. Project carried out by YSHIELD Australia using HSF‐54 shielding paint.


EMR Shielding of offices located underneath mobile phone tower.


2) High meter reading (3193 microwatts per metre squared) in corridor outside office to be shielded.

3) High meter reading of 2615 microwatts per metre squared inside office before shielding.

1) Bank of mobile phone towers loom over shopping centre beaming through glass roof into first floor

offices below.

4) Inside of main office pre‐shielding.

5) Main office totally shielded with HSF‐54 Shield‐ing paint.

6) Over painted office now showing very low reading after shielding of 1.37 microwatts per metre squared.



7) Adjoining office with `carpet style` partitions, not suitable for shielding with paint. Readings were several thousand microwatts per metre squared. A potential problem for shielding.

YSHIELD Shielding Paints Project Examples YSHIELD Shielding Paints Project Examples

9) New fabric shielded partition wall in place with now very low readings of only 1.71 microwatts per metre squared.

10) Ceiling in same office (with new partition wall) shielded with HSF‐54 paint and over painted. Now very low readings of only 1.86 microwatts per metre squared.

8) The solution: Partition boards are framed in shielding fabric (white areas) and screwed on top of existing partition wall.

EMR Shielding of adjoining office (just off open plan office on previous page) underneath mobile phone tower. Project carried out by YSHIELD Australia using fabric shielding on parti‐tion wall and HSF‐54 shielding paint on ceiling.


YSHIELD Shielding Paints Project examples

Shielding of a loft in Austria with shielding paint HSF54. Scope of project: Shielding against microwave radiation from a nearby cell phone tower and against low-frequency fi elds from electrical installation. Project carried out by Grabmann Co., Austria, http://www.elektrosmog-messung.at

1) Cell phone tower on a house nearby. 2) Before HF-shielding: 158.7 μW/m².

3) Application of HF shielding paint. 4) ) After HF shielding: 4.2 μW/m².

5) Shielding eff ectiveness (μW/m²). 6) Graph shows: perfect shielding against LF-electric fi elds.

EMR-Shielding of a loft, attic fl at / Amstetten, Austria

Shielding of condominiums, block of fl ats / Budapest, Hungary

1) View of typical apartment building.

3) Shielding of a power distribution room, adjacent to a childrens bedroom.

Shielding of condominiums / owner-occupied fl ats in Hungary with shielding paints NSF34 / HSF54. Scope of project: Shielding of low-frequency AC electric fi elds for all household electrical installation / wiring; as an option shielding of high-frequency electric radiation was also off ered. Project was carried out by Quadrat Kft company, Hungary.


4) Shielding of all household installation / wiring.

2) Plan of individual apartments.

5) Finished appartment, grounding in bottom left.

EMR-Shielding of a ground fl oor apartment / Vienna, Austria

1) The cell phone tower on neighboring house. 2) Painting of the living room in progress.

3) Diff erent view. 4) They used shielding paint HSF54.

5) The room gets painted white again.

Shielding of a ground fl oor apartment in Austria with shielding paint HSF54. Scope of project: Shield-ing against a combined GSM / UMTS cell phone tower on the neighboring house. Project carried out by customer.

6) Radiation levels / power fl ux density: Before shielding: 789 μW/m²; After shielding: 0.47 μW/m²


EMR-Shielding of an apartment / Amsterdam, The Netherlands

1) Cell phone tower on a house nearby. 2) Application of HF shielding paint.

3) Painting of the ceiling in progress.

Shielding of an apartment at the Amsterdam airport in the Netherlands with shielding paint HSF54. Scope of project: Shielding against microwave radiation from a cell phone tower. Project carried out by customer.

4) Radiation levels / power fl ux density: Before shielding: 150 μW/m²; After shielding: 0.08 μW/m²


Testimonial

“The fi rst day I moved into my apartment, I found that I could not sleep. I woke up at 3:00 and 4:00 am. I realized there might be something wrong with my apartment. When I checked around my apartment, I found out there is a cell phone tower just 50 meters away. I checked on the internet and found YSHIELD paint. The professional assistance they provided gave me the confi dence to try their product. They provided the radio frequency meter to measure the diff erence before and after applying the paint. The result is amazing. The reading of the radiation decreased from 150 μW/m² (= 0.15 mW/m², see left picture) to 0.08 μW/m². Now I can sleep very well. Thanks to the YSHIELD product”.

C. L., electronics engineer, The Netzerlands / Taiwan

EMR-Shielding of a duplex, semi-detached house / Dorfen, Germany

1) Painting with EMR Shielding paint. 2) "The paint is easy to handle“ ...

3) ... says the homeowner, a professional painter. 4) The duplex is shielded.

5) The family home is white again.

Shielding of a semi-detached house in Germany with shielding paint HSF54. Scope of project: Shield-ing against a combined GSM / UMTS mobile phone tower, which was erected 100 meters from the family home. Project carried out by customer.

6) Radiation levels / power fl ux density: 2648 μW/m² - Before shielding - 650 μW/m² 10.2 μW/m² - After shielding - 4.43 μW/m²


Shielding of a family home in Austria with shielding paint HSF53. Scope of project: Shielding against microwave radiation from a cell phone tower. Project carried out by customer.

1) Application of shielding paint. 2) Shielding paint applied on both sides.

3) Grounding of the shielding paint. 4) Application of the top coat.

6) Perfectly white again. 6) Point of measurement marked; power fl ux density in μW/m²; before shielding: after shielding:


EMR-Shielding of a family home / Bruck a.d. Mur, Austria


Salzburg Federal Clinics (SALK), Medical Research / Salzburg, Austria

YSHIELD shielding paints were used in a medical research project carried out at the SALZBURG Federal Clinics (SALK) in Austria. YSHIELD’s HSF54 shielding paint was used in this project for the shielding of a predefi ned area, to make sure that all research subjects were exposed to equal levels of microwave radiation (from a nearby cellphone tower) during the testing periods.

The interdisciplinary research projects was performed by Univ.-Prof. Dr. Gerhard W. Hacker and his team, IGGMB - Research Institute for Frontier Questions of Medicine and Biotechnology, Salzburg Fed-eral Clinics, www.med-grenzfragen.at

EMR-Shielding of BAUFRITZ - houses / Erkheim, Germany

YSHIELD EMR protection has partnered with the BAUFRITZ company in Bavaria for the development of EMR protection paints which are based on renewable resources. YSHIELD R&D developed a unique shielding paint using only natural binding agents. HSF71 “BAUFRITZ” shielding paint is currently used in BAUFRITZ houses with cell towers in the vicinity, to provide maximum protection for homeowners even in areas with high microwave exposure levels. See www.baufritz.de and www.baufritz.co.uk.

Date post:	01-Feb-2022
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

YSHIELD Project Examples

Documents