Page 1Find us at www.keysight.com
S O L U T I O N P A R T N E R
Keysight and Solutions Partner
To learn how this solution can address your specific needs, please contact Keysight’s solution partner, Solution Sources Programming (SSP).
SSP is a global test and mea-surement services provider specializing in designing and implementing turnkey test solutions throughout the PCB product life cycle, and sub-assembly and assembled products.
ssprog.com
Strategic Solutions Partner
ZA0047A Wireless IoT Device Regulatory Test SolutionKeysight Technologies and Solution Sources Programming
Regulatory Testing for 2.4/5 GHz Unlicensed Band As the world becomes increasingly connected, wireless technologies have
evolved to keep pace. Major regulatory bodies such as FCC and ETSI have begun
imposing stringent compliance test requirements for the unlicensed 2.4 and 5
GHz bands, and wireless IoT devices must go through comprehensive regulatory
testing to ensure they can operate harmoniously in busy wireless environments.
With the Keysight ZA0047A wireless IoT device regulatory test solution, you can:
• Cover the latest test cases for ETSI EN300-328/301-893, FCC Part
15.247/407 and DFS with dedicated test software
• Support various IoT device types, such as Frequency Hopping, Adaptivity,
MIMO up to 8 channels and common radio formats (WLAN, Bluetooth® and
Zigbee, etc)
• Simplify test automation and improve speed using the signaling test method
(with X8711A IoT device functional test solution or companion device)
• Reduce test complexity with readily available software, and prove adherence
to regulatory standards with the report generation function
Page 2Find us at www.keysight.com
Figure 1: Solution Sources Programming’s lifecycle management of ZA0047A
Complete turnkey ZA0047A solution with Solution Sources Programming (SSP)
For more than 29 years, SSP has helped innovative design teams across multiple
industries assure product performance and quality. SSP will integrate the Keysight
ZA0047A so you can get additional benefits such as:
• Test station hardware assembly in a mobile test rack, with PC and software
installation, work shelves and ergonomic swing arm for monitor, keyboard and mouse
• Pre-ship verification tests to ensure tester performs to expectations
• One-stop shop – obtain RF shield box, antennas and cables for over-the-air testing
• Customizable test data reports, per customer requirements
Gather instrumentconfigurationrequirements
Create proposal Quote Order material
Ongoingtechnicalsupport
Validationtest
Installation Buy off
ManufacturingCompliance
testequipment
Page 3This information is subject to change without notice. © Keysight Technologies, 2019-2020, Published in USA, January 31, 2020, 5992-4295EN
Find us at www.keysight.com
Learn more at: www.keysight.com
For more information on Keysight Technologies’ products, applications or services,
please contact your local Keysight office. The complete list is available at:
www.keysight.com/find/contactus
System Components
Hardware model Description
N9020B with options 544, B1X, CR3, AMG
MXA Signal Analyzer, 10Hz to 44GHz, 160MHz analysis bandwidth, wideband IF output connector, calibration + uncertainties + Guard-banding (accredited)
N5172B with options 506, 653, 655, 657, AMG, N7607EMBC
EXG RF Vector Signal Generator, 9kHz to 6GHz, with 160MHz RF bandwidth, calibration + uncertainties + Guard-banding (accredited), Signal Studio for DFS Radar Profiles
N5173B with options 540, AMG
EXG RF Analog Signal Generator, 9kHz to 40GHz, calibration + uncertainties + Guard-banding (accredited)
ZA0047A-105 X8749A Signal Conditioning Test Set
ZA0047A-106 X8750A 4-Channel MIMO Power Test Set
Software model Description
XA5001A ETSI 300-328/301-893 test software
XA5002A FC Part 15.247/407 test software
XA5003A DFS test software
Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., and any use of such marks by Keysight Technologies is under license.