Date post: | 13-Jan-2016 |
Category: |
Documents |
Upload: | edward-stevens |
View: | 216 times |
Download: | 0 times |
ZD10 (Zigzag Device)
Check Book
ZD10 (Zigzag Device)
Sunstar Precision Co.,Ltd.Sunstar Precision Co.,Ltd.
YES NO
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Write down ZD10 Model No. and S/N.
Model No. :
S/N :
Install date :
Technicain :
Note :
- 1 - Sunstar Precision Co.,Ltd.
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Is quantity and quality of ZD10 OK?
◆ L-Type : EA, R-Type : EA
- 2 - Sunstar Precision Co.,Ltd.
YES NO
ZD10 (Zigzag Device)
<Control B/D> <ZD10 B/D> <Lifting B/D>
<NOTE>
2. Is quantity of the boards for ZD10 prepared properly?
◆ SQ B/D : EA, Control B/D : EA, Lifting B/D EA
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
- 3 - Sunstar Precision Co.,Ltd.
YES NO
<NOTE>
3. Do you prepare all cables for ZD10?
① Control B/D ↔ Can communication connecting cables
② Sub control B/D ↔ Tension unit connecting cables
③ Sub control B/D ↔ Jump Sol. connecting cables
④ Zigzag motor connecting cables
ZD10 (Zigzag Device)
Control B/D ↔ Can communication cables
Sub control B/D ↔ Tension unit connectingcable
Sub control B/D ↔ Jump Sol. Connectingcable
Zigzag motor
Connecting cable
Zigzag encoder Connecting cable
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
- 4 - Sunstar Precision Co.,Ltd.
YES NO
<NOTE>
3. Do you prepare all cables for ZD10?
⑤ Zigzag encoder connecting cable
⑥ ZD10 B/D ↔ Air pressure Sol. power cable
⑦ Air pressure Error detection cable
⑧ ZD10 B/D ↔ SQ lifting B/D connecting cable
ZD10 (Zigzag Device)
<ZD10 B/D ↔ <Air pressure Error detection cable> <ZD10 B/D ↔ Air pressure Sol. Power cable> SQ lifting B/D connecting cable>
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
- 5 - Sunstar Precision Co.,Ltd.
- 6 - SUNSTAR 특수정밀㈜
YES NO
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
4. Do you prepare the parts of air pressure for ZD10?
① Nipple(KQ2T06-04) and Nipple for branch (KQ2t06-00)
② Black and invisible tubes
③ Air pressure Sol.
④ Filter regulator and air pressure Sol. connecting hose
< For #1 HEAD> <For normal HEAD> <For the last HEAD>
① Nipple <For branch>
↑ ② Tubes
← ③ Air pressure Sol.
→ ③ Filter regulator
Air pressure Sol. hose
YES NO
ZD10 (Zigzag Device)
Setting Jig (3~8mm) Needle drop point Jig pin
5. Do you prepare tools and jigs for installation?
<NOTE>
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
ZD10 (Check Sheet)
- 7 - Sunstar Precision Co.,Ltd.
YES NO
ZD10 (Zigzag Device)
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Did you use water hose and level gauge when adjusting level?
<NOTE>
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 8 - Sunstar Precision Co.,Ltd.
ZD10 (Check Sheet)
2. DO you check important Check point of ZD10(assy)?
① Do you check state of bolt screwing and scratch and chopping?
② Does the wheel spring fine?
③ Is there no jamming on lifting slide?
④ Is the motor cable connecting fine?
⑤ Is the belt tention fine?
⑥ Are the nipple and cover attached properly?
⑦ Is the air entrance fine?
YES NO
<NOTE>
ZD10 (Zigzag Device)
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
ZD10 (Check Sheet)
- 9 - Sunstar Precision Co.,Ltd.
3. Did you attach jumper pin(end resistor) on control B/D and the last SQ B/D?
① Did you attach jumper pin(end resistor) only on the last Head’s SQ B/D?
② Did you attach proper control B/D and ZD10 B/D?
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 10 - Sunstar Precision Co.,Ltd.
4. Did you connect cables of control B/D and SQ B/D correctly?
① Is there no missing cables?
② Is there no bad connection?
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 11 - Sunstar Precision Co.,Ltd.
5. Did you check all check list of air pressure tube process?
① Did you check connecting state of nipple and connecting plugs only with the first and last head’s nipples?
② Is the air pressure hose connected with nipple completely?
③ Did you check air pressure of Sol. and filter regulator perfectly?
YES NO
ZD10 (Zigzag Device)
<NOTE>
ZD10 (Check Sheet)
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 12 - Sunstar Precision Co.,Ltd.
6. Did you check all check list of attaching device?
① Did you use proper ZD10 needlebar and needle?
② Did you set needlebar correctly?
③ Did you set needle drop point setting by using Jig?
④ Is there no missing parts?
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 13 - Sunstar Precision Co.,Ltd.
7. Was ZD10 setting set properly to specification?
① L-Type R-Type Both-Type Extension
② When origin setting, are cord thread point and state of pulley collar screw good?
③ Did you set OP.Box setting correctly?
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 14 - Sunstar Precision Co.,Ltd.
Check Point · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Did you check all check list of SQ40i Check Point confirmation?
① Is the finger valve entrance derection right?
② Did you set driving belt tension correctly by using Jig?
YES NO
ZD10 (Zigzag Device)
<NOTE>
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 15 - Sunstar Precision Co.,Ltd.
Check Point · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Did you check all check list of SQ40i Check Point confirmation?
③ Is nipple cover “B” in the center of nipple?
④ Is angle of nipple cover “A” and “B” right angled?
YES NO
<특이사항>
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 16 - Sunstar Precision Co.,Ltd.
Check Point · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1. Did you check all check list of SQ40i Check Point confirmation?
⑤ Did you use zigzag needlebar, and standard needle?
⑥ Is there no missing parts?
YES NO
<NOTE>
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
- 17 - Sunstar Precision Co.,Ltd.
Trouble - Shooting · · · · · · · · · · · · · · ·· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
YES NO
ZD10 (Zigzag Device)
ZD10 (Check Sheet)
Confirmation of parts
Check Point
Installation
Trouble-Shooting
Characters
1. Is there any strange symptom?
(When there is strange symptom, write down about the symptom in detail.)
<NOTE>
- 18 - Sunstar Precision Co.,Ltd.