7
Transmission: Subject: Application: Issue Date: ZF6 Gen 1 “E” Shift Valve Body Layout BMW April, 2015 Technical Bulletin #1676 ZF6 Gen 1 “E” Shift Valve Body Layout There are many different styles of ZF6 valve bodies. We need to make sure to pay attention to all the small parts and valve arrangements when we take them apart. Use figure 1 to identify the valve body upper casting, lower casting and separator plate. In figure 2 are the solenoid identification, solenoid style and resistance values. Figure 3 shows the check balls, accu- mulator, filters and small parts locations. Figure 4 upper valve body with valve names and spring sizes. Figure 5 and 6 are the lower valve body with the valve names and spring sizes. Special thanks to Valve Body Pros for the use of the valve body core. JW • Page 1 of 7 Copyright © 2015 ATRA All Rights Reserved
